PID.rtf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:016155169

MAGAZINE,CARTRIDGE

REFERENCE NUMBER:RD005

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

Source Control Top Drawing with only one Source.

Procure Sole Source IAW the AMSTA 525 Form.

______________END OF EXCEPTIONS__________________

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:CA061

REFERENCE NUMBER:CS120

REFERENCE NUMBER:ZD073

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

MAGPUL INDUSTRIES CORP. 1LX50 P/N MAG556-BLK

IAW BASIC DRAWING NR 19200 13060595

REVISION NR A DTD 06/25/2019

PART PIECE NUMBER: 13060595-1

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13060595-1

REVISION NR DTD 05/17/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13060595-1

REVISION NR DTD 06/26/2018

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:A1 OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

NSN:016597086

MAGAZINE, CARTRIDGE.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS120

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:ZD080

_______________EXCEPTION DATA____________________

Source Control Top Drawing with only one Source.

Procure Sole Source IAW the AMSTA 525 Form.

______________END OF EXCEPTIONS__________________

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR

AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED

ON THIS CONTRACT. THE IDENTIFICATION OF THE

ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.

UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED,

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES<(>,<)> UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CRITICAL APPLICATION ITEM

MAGPUL INDUSTRIES CORP. 1LX50 P/N MAG556-MCT

IAW BASIC DRAWING NR 19200 13060595

REVISION NR A DTD 06/25/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR D DTD 05/13/2025

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13060595-2

REVISION NR DTD 06/04/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13060595-2

REVISION NR DTD 05/13/2024

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:A1 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:ZD079 OBJECT TEXT ID ST

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RD005

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

REFERENCE NUMBER RD004

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER CA061

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER CS120

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING. OFFERORS WHO ARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

REFERENCE NUMBER ZD073

THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ZD054

CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,

UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies

"Markings shall be omitted for sensitive, controlled or pilfera bl e items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.