PID.pdf

PID

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:016456815

DETECTOR,GAS

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RD003

REFERENCE NUMBER:RQ035

REFERENCE NUMBER:CS241

REFERENCE NUMBER:CS199

MINE SAFETY APPLIANCES COMPANY 55799 P/N DSK 3053‐148 REV. 6

MSA SAFETY SALES, LLC 8B9P7 P/N DSK 3053‐148 REV. 6

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1D, 15 DEC 1999

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:E5 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PIPE PLUG AND CONNECTOR CAP SHALL CLOSED

DESIGNATED AREAS WITH NONCORROSIVE PLASTIC

END PLUGS AND CAPS TO ENSURE NO DAMAGE TO

PRODUCT OR DEBRIS WILL CONTAMINATE EQUIPMENT

WHEN IN OPERATION.

HAZARDOUS MATERIAL STATUS SHALL BE DETERMINED

BY MANUFACTURER AND PROVIDED TO DLA LAND AND

MARITIME PRIOR TO CONTRACT AWARD:

REFERENCE NUMBER:IP025

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RD003

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

REFERENCE NUMBER RQ035

RQ035: ITEM MAY CONTAIN BATTERIES

REFERENCE NUMBER CS241

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND

REQUIRES ENGINEERING SOURCE APPROVAL BY THE

GOVERNMENT DESIGN CONTROL ACTIVITY.

REFERENCE NUMBER CS199

ALTERNATE OFFEROR REQUIREMENTS:

THE FOLLOWING DOCUMENTATION IS REQUIRED IN

ACCORDANCE WITH MIL‐T‐31000. (A) ALL DRAWINGS

AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.

(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE

IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED

INSPECTION/ACCEPTANCE CRITERIA. (C)

IDENTIFICATION OF SOURCES WHO WILL PERFORM

CRITICAL PROCESSES/OPERATIONS, INCLUDING

SOURCES OF FORGINGS AND CASTINGS. (D) IF

AVAILABLE COPIES OF PURCHASE ORDERS FROM THE

ITEM. (E) A SHOCK EXTENSION REPORT IN

ACCORDANCE WITH MIL‐S‐901 AND IN A FORMAT AS

SPECIFIED IN DI‐ENVR‐80706 IS REQUIRED.

IF THE OEM'S DETAILED DRAWINGS ARE NOT

AVAILABLE, THE OFFEROR MUST SUPPLY AN

ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW

THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,

IF REVERSE ENGINEERING WAS USED, THE COMPLETE

PROCEDURE WILL BE REPORTED INCLUDING: NUMBER

OF SAMPLES, METHODS AND MEASURES USED, ALL DATA

COMPILED, RATIONALE FOR DIMENSION TOLERANCE

DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS

DATA WILL BE FORWARDED TO THE ENGINEERING

SUPPORT ACTIVITY FOR EVALUATION.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS