PID 013854191.docx

BATTERY, STORAGE

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RT001: MEASURING AND TEST EQUIPMENT

NICKEL CADMIUM, WET

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

Hazard Communication Standard Notice:

Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.

The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.

In accordance with the revised standard after June 1, 2015:

1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.

2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.

3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.

For more information on SDS, refer to OSHAs website, available at:

https://www.osha.gov/law-regs.html For information on 29 C.F.R. 1910.1200, refer to the below link:

https://www.osha.gov/dsg/hazcom/index.html

PART NUMBER: D8565/10-1

MSDS/PSDS REQ. PER FED-STD-313

SHELF LIFE; TYPE 2, 60 MONTHS

NO CONTRACT LOTS SHALL BE RELEASED FOR SHIPMENT UNTIL LOT ACCEPTANCE TESTING IS MET AND FINAL APPROVAL IS GIVEN BY THE QUALIFYING ACTIVITY. TEST SAMPLES SHALL NOT BE INCLUDED IN CONTRACT QUANTITY .

EXCEPTION TO DATA:

: "THE REQUIREMENTS FOR ACQUIRING THE PRODUCTS

DESCRIBED HEREIN, P/N D8565/10-1 AND P/N D8565/10-2, SHALL CONSIST OF THIS SPECIFICATION SHEET AND MIL-PRF-81757."

1) DELETE, "TYPE 2", FROM THE TITLE.

2) CHANGE THE WORDING,: "THE REQUIREMENTS FOR ACQUIRING THE PRODUCT

DESCRIBED HERE IN SHALL CONSIST OF THIS SPECIFICATION SHEET AND

MIL-PRF-81757." TO: "THE REQUIREMENTS FOR ACQUIRING THE PRODUCTS DESCRIBED

HEREIN, P/N D8565/10-1 AND P/N D8565/10-2, SHALL CONSIST OF THIS

SPECIFICATION SHEET AND MIL-PRF-81757."

3) ALLOW USE OF EITHER THE P/N MS3509-28 RECEPTACLE OR THE NEWLY QUALIFIED

P/N MS3509-32 RECEPTACLE.

4) MOVE THE HARNESS FUNCTION TYPE TESTS (10, 11, 12) TO GROUP B

5) ELIMINATE THE VENTED FILLER CAP TEST (9)

6) ALLOW THE USE OF EITHER AD590L OR AD590M

7) IN FIGURE 2, CHANGE #10-32 AN3C3A SCREW AT RECEPTACLE TO THE LONGER

AN3C5A SCREW.

8) REMOVE TEST #1 INCOMING INSPECTION FROM GROUP A.

9) REMOVE TEST #13 CONDITIONING CHARGE FROM GROUP A ONLY.

10) THE, "FOR NO LESS THAN 24 HOURS", SHALL BE REMOVED FROM THE STEP B OF

4.5.32.

11) TABLE II: REMOVE TESTS #3, #4 & #5 FROM GROUP A

12) TABLE II: REMOVE DUPLICATIONS OF TESTS #3, #4 & #5

13) TABLE I TEST NUMBER 5 FOR GROUP A REQUIREMENT.

THE DIELECTRIC STRENGTH AND INSULATION RESISTANCE TEST:

NOT TO BE PART OF GROUP A TESTING.

EEXCEPTION WILL BE IN EFFECT ONLY UNTIL MIL-PRF-81757/17

HAS BEEN UPDATED BY NWSC CRANE.

END OF EXCEPTIONS.

I/A/W MIL-PRF-81757/17 (AS)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to this item.

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-PRF-81757/17 NOT 1

REVISION NR DTD 05/15/2019

PART PIECE NUMBER: D8565/10-1

IAW REFERENCE SPEC NR MIL-PRF-81757D(4) SUP 1 NOT 1

REVISION NR 4 DTD 04/06/2017

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-81757-16 NOT 1

REVISION NR 16 DTD 10/15/2007

PART PIECE NUMBER: