Pictures and Measurements for Forklift Tines.pdf
PDF 867 KB Posted
- Attached to
- Customized Forklift Tines
- Solicitation number
- Not on record
About this file
The document contains a detailed set of images and measurements for custom forklift tines intended for a 2021 HOIST P650, P-Series forklift with a 65,000 lbs load capacity. The sources sought notice requires forklift tines with specific dimensional requirements: 96" total length, 4" x 11 3/4" working part dimensions, 40-41" fork height, a 2 5/8" diameter pin hole located 2 1/2" from the top of the tine, and tapering beginning at 30" from the front of the tine. The Department of the Air Force Pacific Air Forces is seeking interested vendors to submit responses addressing the custom tine specifications, potential load capacity impacts, and alternative solutions by 5:00 PM AKDT on July 17, 2025. Vendors must email PDF submissions with supporting documentation to two specified Air Force email addresses.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Front View of 65K HOIST
Tine Pin-Hole Size 2 5/8” Diameter
Tine Pin-Hole Should be 2 ½” from Top of Tine
Top of the Fork-Tine to Top of the Fork should be 40-41” no less than that
Top of the Fork Tine Thickness 4 9/16” (where it connects to the Mast Head)
Top of the Fork Tine Width 11 ¾” (where it connects to the Mast Head)
Important Measurements-The working part of the Tine needs to be 11 3/4” Wide x 4” Thick
Tin Length needs to be 96”
Tine starts to Taper at 30” from the front of the Tine
File details come from the government source that posted it. Updated .