PGC 00183_Tech Changes.docx
DOCX document 15 KB Posted
- Solicitation number
- SPE1C1-24-R-0022
About this file
This document outlines technical changes to a federal solicitation for gloves. The Defense Logistics Agency Troop Support is seeking bids for gloves in two categories: men's and women's black gloves, and leather unisex gloves in a heritage walnut shade. Specifications are provided for finished dimensions and tolerances of the leather gloves in various sizes. Packaging, packing, and marking requirements are defined according to military standards for both glove types. The solicitation also requires an RFID inlay be added to the barcode paper hang tag or label of each leather glove item. Guidance on RFID implementation is available from the contracting officer.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 24R0022_Unisex Glove_Synopsis_REVISED.docx | DOCX document | |
| PGC 01834_Tech Changes.docx | DOCX document | |
| GL-PD-19025_15 Jul 2019.pdf | ||
| 24R0022_Unisex Glove_Synopsis.docx | DOCX document | |
| A-A-50386_13 March 1991.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
GLOVES, LEATHER, UNISEX
8440-01-683-7751 - XXS
8440-01-683-7753 - XS
8440-01-683-7756 - S 8440-01-683-7758 - M 8440-01-683-7759 - L
8440-01-683-7760 - XL
8440-01-683-7762 - XXL
SHALL BE MADE IN ACCORDANCE WITH GL-PD-19025A, DATED FEBRUARY 19, 2020
PATTERN DATE: 21 FEB 2020
SHADE STANDARD FOR HERITAGE WALNUT 567 SHALL BE IN ACCORDANCE
WITH COLOR CHIP 10059 OF AMS STD 595
NOTE: All references to Certification Labeling and Procedures cited in Para. 3.8.3, 3.8.3.1 and 5.7 of subject document do not apply to this procurement.
Page 3 Para. 3.6, Table III: delete and substitute the following new Table III:
"TABLE III. Finished Dimensions (inches).
| Size | Overall Length | Thumb Length | Width | |
| (A) (B) | (C) | |||
| XX-Small(XXS) | 9-7/8 | 2-1/4 | 4-1/8 | |
| X-Small (XS) | 10-1/8 | 2-5/16 | 4-1/4 | |
| Small (S) | 10-3/8 | 2-3/8 | 4-3/8 | |
| Medium (M) | 10-5/8 | 2-5/8 | 4-3/8 | |
| Large (L) | 10-7/8 | 2-11/16 | 4-1/2 | |
| X-Large (XL) | 11-1/8 | 2-3/4 | 4-11/16 | |
| XX-Large (XXL) | 11-3/8 | 2-7/8 | 4-7/8 | |
| Tolerance | +/- 1/4 | +/- 1/8 | +/- 3/16 |
NOTE: Refer to Figure 1 for A. B and C measurements."
INFORMATION FOR COMMERCIAL AQL'S: AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S): VISUAL - GENERAL INSPECTION LEVEL II, AQL - 1.0 DIMENSIONAL - SPECIAL INSPECTION LEVEL S2, AQL - 2.5 ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4
PRES/PACK C/C TO GL-PD-19025A.
EACH PAIR OF GLOVES SHALL BE INDIVIDUALLY PACKAGED IN A COMMERCIALLY ACCEPTED CLEAR PLASTIC ZIP-LOCK BAG WITH ALL-OVER 1/8 SIZE PIN HOLE VENTS. BAR CODED NSN AND UPC LABELS ALONG WITH ALL OTHER REQUIRED MARKING SHALL BE PLACED ON THE POLY BAG TO AVOID ANY DAMAGE TO THE GLOVES.
GLOVES SHALL BE PACKED 30 PAIRS TO A SHIPPING CONTAINER
SHIPPING CONTAINER SHALL BE STYLE RSC-L, SW, TYPE CF OR SF, GRADE 275 WITH DW LINER GRADE 275
ASTM-D-5118. STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES ANDASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS APPLY.
ALL MARKINGS TO INCLUDE BAR CODED NSN, UPC LABELS, and RFID TAGS SHALL BE IN ACCORDANCE WITH MIL-STD-129, LATEST EDITION.
PALLETIZATION IN ACCORDANCEW ITH MIL-STD-147 IS REQUIRED
RFID HANGTAG:
An RFID inlay shall be added to the barcode paper hang tag attached to each item. Where the use of self-adhesive bar-code labels are authorized, the RFID inlay may be added to the self-adhesive label in lieu of a paper hang tag. All other contract barcode and hang tag requirements still apply.
The RFID inlay should be passive Gen2 with a frequency range between 860 and 960 MHz. The RFID antenna should be Avery/Dennis AD222 or comparable with ISO/IEC 18000-C EPCglobal C1G2 Protocol and an EPC memory allocation containing a 96 bit EPC Number. The data linking the EPC number to the NSN and quantity unit pack must be exportable to VIM/ASAP. The bar code of the EPC Number must be printed at the bottom of the tag along with the human readable version below the bar code.
In addition to defects applicable to the paper tag and barcoding element, the RFID tag shall be examined for the defects listed below:
RFID Inlay omitted RFID Inlay not secure RFID Inlay not laying flat when packaged RFID Inlay not readable with RFID scanner RFID Inlay or configuration not as specified
The manual "Item-Level Passive RFID Technology Manufacturer's Information Guide" provides guidance on RFID implementation and is available from the contracting officer.
File details come from the government source that posted it. Updated .