PERFORMANCE WORK STATEMENT Stackable Dining Room Chairs DCF 3.pdf

PDF 302 KB Posted

Attached to
FA301624Q5060 -Dining Room Chairs RFQ Federal contract opportunity
Solicitation number
FA301624Q5060
Issued by
Department of the Air Force Air Education and Training Command

About this file

This document is a Performance Work Statement (PWS) for the removal, unloading, and installation of new dining room chairs at two buildings on Lackland Air Force Base in Texas.

The PWS details the scope of work, which includes unpacking and placing new chairs in the specified facilities. It outlines the contractor's responsibilities for safety, environmental compliance, hazardous materials management, workmanship, waste disposal, security, and cleanup. The PWS also covers government-furnished services, traffic regulations, quality assurance, and inspection and acceptance procedures.

The related federal contract opportunity is a combined synopsis/solicitation for the purchase, removal, and installation of dining room chairs. This is a small business set-aside with NAICS code 337127. Interested vendors are requested to provide quotes for the listed line items. The solicitation number is FA301624Q5060.

View the file

Other files for this federal contract opportunity

Other files attached to FA301624Q5060 -Dining Room Chairs RFQ, newest first.
File Type Posted
Questions and Answers-FA301624Q5060 -Dining Room Chairs RFQ.pdf PDF
Salient Characteristics Chairs Stackable DCF 3.pdf PDF
FA301624Q5060 -Dining Room Chairs-RFQ.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PERFORMANCE WORK STATEMENT

REMOVE, UNLOAD & INSTALL DINNING ROOM CHAIRS

AT

BUILDINGS: 9270, 1209 LUKE ST. LACKLAND AIR FORCE

BASE, TEXAS 78236

1. SCOPE OF WORK. Contractor shall provide all personnel, equipment, tools, Labor, transportation, and supervision necessary to unpack and install new chairs in the following building:

Building 9270, 1209 Luke St, Lackland AFB, TX 78236, All activities shall be coordinated with the Food Service Staff Office and Dining Facility Managers.

POC: William Moulder 210-671-3902, email: william.moulder.1@us.af.mil to schedule installation for each facility. All work shall be accomplished in accordance with product manufacturer’s recommendations and industry standards, and meet all municipal, state, and federal codes, standards, an guidelines.

2. SPECIFIC TASKS: The contractor shall unpack and install/new chairs in the facilities identified in

Paragraph 1. The contractor shall:

a. Unpack new chairs, dispose of all packing materials not in Government recycle bins or trash dumpsters.

b. Place new dining room chairs in the facility, placement will be provided on site by Government representative

3. SAFETY: The contractor shall ensure compliance with OSHA Safety and Health Regulations, prior to daily commencement of work, the contractor shall properly secure the work site and locate and secure tools, equipment, and material as necessary to ensure the safety and protection of personnel, equipment and property.

4. ENVIRONMENTAL COMPLIANCE: The contractor shall be responsible for the removal and disposal of all waste generated from unpacking and installation of this system. The Contractor shall notify the HAZMAT Pharmacy of any hazardous chemicals.

5. HAZORDOUS AND/OR TOXIC MATERIALS. A hazardous material (HAZMAT) is one that poses a risk to the health and safety of the public, and/or the environment if not properly controlled during the handling, storage, manufacture, processing, packaging, use, disposal, or transportation. Hazardous material may be elements or compounds, and can be found as gases, solids, or liquids. HAZMAT is defined under Section 1910.1200© of Title 29 of the Code of

Federal Regulations.

5.1 Contractor shall identify and report HAZMAT usage to the HAZMAT Pharmacy according to local procedures. The contractor shall submit a completed AF Form 3952, Chemical Hazardous

Material Request/Authorization listing all HAZMAT that will be used in performance of the contract. Additionally the contractor is required to submit Material Safety Data Sheets (MSDS) for each of the listed materials in accordance with safety regulations.

5.2 The phone number for the Lackland AFB Hazardous Material Pharmacy is 671-5389. A direct

Point of Contact will be provided upon contract award.

6. WORKMANSHIP AND REGULATORY COMPLIANCE. This is an occupied building. Materials on site must be kept in such a manner that continuing working operations is not impaired. The contractor shall take precautions to prevent damage to government property. TH contractor shall repair or replace damaged items at no additional cost to the government. All analysis, workmanship, and quality control performed under this contract shall conform to published and recognized authoritative sources of good industry standard and practices in compliance with OSHA Standard 1926 Subparts H and O. The contractor will be responsible for any additional cost required to insure compliance to said standards and practices.

7. WASTE DISPOSAL AND ENVIRONMENTAL PROTECTION. At the end of each work day, the contractor shall remove all residual equipment, components, materials, and /or debris generated and disposed of in appropriate non-government containers. All areas shall be cleaned of debris at the end of each working day and prior to final acceptance of the work.

8. SECURITY AND CLEAN-UP. All facilities shall be secured at the end of each day. The contractor shall ensure that all work accomplished is limited to the terms and conditions outlined in this SOW. The contractor shall coordinate with the government representative(s) designated during the pre-con upon arrival and prior to leaving the work site each day. The government representative(s) will be located in building 7065, Suite 228.

9. WARRANTIES. Installation shall be warranted from defect for one year, and all standard system warranties shall apply. Warranty shall begin the day of completion and acceptance by the Mission Support Group.

10. STORAGE OF LEFT-OVER ITEMS. All items awaiting installation or items that are left over following final installation shall be stored in Bldg 5075 warehouse.

11. COMPLETION OF WORK. The contractor shall ensure that work for this project is performed in accordance with the criteria herein, and that all equipment and systems shall be fully operational at the completion of work for this project. All surfaces shall be cleaned; all carpeted areas vacuumed, tiled floors swept & mopped, ceiling tile replaced if damaged due to work they will be replaced.

II. GENERAL INFORMATION

1. POINTS OF CONTACT. Upon award, the contractor will provide to the contracting officer a list of all contract personnel who will be performing services on this contract.

2. HOURS OF WORK: Normal hours of work are 07:30 AM to 4:30 PM, Monday thru Friday, except government holidays.

3. GOVERNMENT FURNISHED SERVICES.

3.1 UTILITIES. The government will provide utilities (water and electricity) and emergency, fire and security police response services.

3.2 POLICE PROTECTION. The 802d Security Forces Squadron shall provide security and law enforcement response and service to the contractor.

3.3 FIRE PROTECTION. The Lackland Fire Departments shall provide initial response, EMS, and fire protection services to the contractor.

4. TRAFFIC REGULATIONS. The contractor employees shall comply with all base traffic regulations, and are subject to random vehicle speed control checks. The contractor’s personnel cited for speeding on the installation may suffer loss of base driving privileges, debarment from the base, or other administrative action. The use of cell phones, except hand-free phones, is prohibited while driving on military installations in San Antonio, TX. (See attached contract clauses LAFB

0009-Cell Phone and LAFB 0010-Securtiy Requirements for solicitations and contracts.)

5. QUALITY ASSURANCE. The government will evaluate the contractor’s performance during various phases of the project. Quality assurance maybe performed randomly by 802d TRW/SE

(Wing Safety), 802d FSS/FSVF (Food Service), and /or the contracting officer and representatives. They may observe performance to monitor quality of work, insure cleanliness, and compliance with safety and security procedures. At the time of award, the contractor shall designate a program manager who will be available throughout the project to discuss with the government inspectors any quality issues that may arise.

6. INSPECTION AND ACCEPTANCE. All services performed under this PWS are subject to inspection by the government at the completion of each task. The contractor, at no additional expense to the government, shall promptly correct unsatisfactory services.

III. APPENDIX

1. PUBLICATIONS. The contractor may access the following websites for government forms and publications: Publications: http://www.e-publishing.af.mil/

Occupational Safety and health Administration (OSHA): www.osha.gov

File details come from the government source that posted it. Updated .