Performance Work Statement.pdf

PERFORMANCE WORK STATEMENT

NAVAL CONSTRUCTION TRAINING CENTER (NCTC)

GULFPORT, MS.

CONSTRUCTION TECHNICAL INSTRUCTORS AND STAFF SUPPORT

1.0 SCOPE

The Naval Construction Training Center (NCTC) Gulfport, Mississippi is acquiring instructor support services to carry out the training requirements for basic construction training to military personnel in the Army, Air Force and Navy assigned to construction occupational fields. Support is also required to provide advance construction training to Navy Seabee personnel. The number of specific courses, course duration, start dates, curriculum, class size, and the number of instructors required to adequately meet NCTC Gulfport mission is determined by the coordinated effort of NCTC Gulfport, Center for Seabees and Facilities Engineering (CSFE), and Naval Education and Training Command (NETC) and approved by the Chief of Naval Operations (CNO). The contractor’s sole responsibility is to provide the number of fully qualified instructors approved to meet the training requirements and to see that the training requirements are fully met as prescribed by NCTC Gulfport. This training is continuous throughout the year and classes overlap and are staggered in order to meet scheduled training requirements.

1.1 BACKGROUND

The NCTC Gulfport is a shore activity in an active operating status. An Echelon V command, NCTC’s Commanding Officer Reports to CSFE, NETC, and ultimately to the CNO. Respectively, NCTC Gulfport is subject to the regional area coordination authority of the Commanding Officer, Naval Construction Battalion Center (NCBC), Gulfport, on which it is located. NCTC Gulfport and NCTC Port Hueneme, California are the (2) two NCTC locations that provide basic construction training to construction Military Occupation Specialties (MOS’s) in the Army and Air Force and basic and advance training for Navy Seabee personnel. Instructor support is provided by contract personnel for NCTC Gulfport, Mississippi.

2.0 ACRONYMS AND ABBREVIATIONS:

A Apprentice Training (Associated with Basic Builder and Steel Worker Courses) ADV-BU Advanced Builder AO Administrative Officer AWD Area Wage Determination BU-A Builder Apprentice Training C1 Advance Specialized Skill Training (follow-on training to Basic Apprentice Training) CANTRAC Catalog of Navy Training Courses CDP Course Data Process CETARS Corporate Enterprise Training Activity Resource Systems (US Navy) CMCT Construction Management Continuum Training CNO Chief of Naval Operations CONUS Continental United States COR Contracting Officer Representative CSFE Center for Seabees and Facilities Engineering D1 Individual, Not Rating-Specific Professional Development Functional Skill Training DFWP Drug Free Workplace Program DGR Designated Government Representative DISCO Defense Industrial Security Clearance Officer DODAAC Department of Defense Activity Address Code DoL Department of Labor DoNCAF Department of the Navy Central Adjudication Facility e-QIP Electronic Questionnaires for Investigations Processing D-0S Defense Operations Specialist ERPs Equipment Replacement Plans F1 Individual Skill or Rating-Specific Functional Training FAD Facility Access Determination FAR Federal Acquisition Regulation FOIA Freedom of Information Act

FSO Facility Security Officer G1 Pipeline Skill Progression Training GMAW Gas Metal Arc Welding ISO International Organization for Standardization JPAS Joint Personnel Adjudication System KO Contracting Officer MOPP Mission-Oriented Protective Posture (US DoD) MOS Military Occupation Specialties NAC National Agency Check NACLC National Agency Check with Local Agency and Credit Checks NATO North Atlantic Treaty Organization NAVFAC Naval Facilities Engineering Command NCF Naval Construction Force NCG Naval Construction Group NCTC Naval Construction Training Center NETC Naval Education and Training Command NISP National Industrial Security Program NITRAS Navy Integrated Training Resources and Administration System NMCB Naval Mobile Construction Battalion OAW Oxy-acetylene Brazing, Cutting and Welding OCONUS Outside the continental United States OPM Office of Personnel Management PCDP Personal and Career Development Plan PII Personally Identifiable Information PWS Performance Work Statement QAE Quality Assurance Evaluator QCP Quality Control Plan QIP Questionnaires for Investigations Processing RST Reinforcing Steel SAAR-N System authorization Access Request - Navy SCA Service Contract Act SCI Sensitive Compartmental Information

3.0 PERFORMANCE WORK STATEMENTS

3.0.1 TRAINING COURSE DIRECTIVES: The following Catalog of Navy Training Courses (CANTRAC) Training Course Control Documents shall serve as directives for each course listed and shall also serve as attachments to this Performance Work Statement (PWS). In the event of a conflict between documents referenced herein and the contents of this PWS, the contents of this PWS take precedence. Nothing in this PWS, however, supersedes applicable laws and regulations, unless a specific exemption has been obtained.

• 3.2.1 INTERSERVICE BUILDER APPRENTICE TRAINING (BU-A NAVY),

A-710-0010

• 3.2.2 STEELWORKER CLASS A USN BLOCK 0, A-711-0005

• 3.2.3 STEELWORKER CLASS A USN BLOCK 1, A-711-0006

• 3.2.4 STEELWORKER CLASS A USN, A-711-00XX (course is currently being developed to replace

Steelworker Class A USN Block 0 A-711-0005 and Steelworker Class A USN Block 1, A-711-0006)

• 3.2.5 CONSTRUCTION PLANNER AND ESTIMATOR SPECIALIST, A-412-0012

• 3.2.6 CONSTRUCTION PROJECT ESTIMATING, A-412-0028 (Scheduled to replace Construction

Planner and Estimator Specialist, A-412-0012 within the next year)

• 3.2.7 CREW LEADER LEVEL CONSTRUCTION MANAGEMENT CONTINUUM

TRAINING, A-710-0051

• 3.2.8 CONSTRUCTION PROJECT PLANNING AND SCHEDULING, A-412-0029 (Scheduled to replace Crew Leader Level Construction Management Continuum, A-710-0051 within the next year)

• 3.2.9 SUPERVISOR LEVEL, CONSTRUCTION MANAGEMENT CONTINUUM

TRAINING, A-710-0052

• 3.2.10 CONSTRUCTION PROJECT EXECUTION, A-412-0030 (Scheduled to replace Supervisor Level Construction Management Continuum, A-710-0052 within the next year)

• 3.2.11 CONCRETE AND MASONRY, A-710-0055

• 3.2.12 STRUCTURE FRAMING, A-710-0054

• 3.2.13 INTERIOR AND EXTERIOR FINISHES, A-710-0056

• 3.2.14 HEAVY CONSTRUCTION I, A-710-0044

• 3.2.15 HEAVY CONSTRUCTION II, A-710-0045

• 3.2.16 POWDER ACTUATED TOOLS, A-710-0038

• 3.2.17 WELDING SUPERVISOR, A-711-0031

• 3.2.18 SHEETMETAL WORK, A-711-0026

• 3.2.19 STEEL REINFORCING, A-711-0027

• 3.2.20 GAS CUTTING AND WELDING, A-711-0024

• 3.2.21 METAL FABRICATION AND LAYOUT, A-711-0025

• 3.2.22 ARC WELDING (STRUCTURAL), A-711-0022

• 3.2.23 ARC WELDING (PIPE), A-711-0023

• 3.2.24 SHIELDED INERT GAS WELDING, A-711-0002

• 3.2.25 TRANSPORTATION OPERATIONS, A-730-0046

• 3.2.26 EARTHWORK OPERATIONS, A-730-0047

• 3.2.27 PAVEMENTS, A-730-0048

• 3.2.28 CONSTRUCTION INSPECTOR, A-710-0022

• 3.2.29 TOOL AND EQUIPMENT MAINTENANCE TECHNICIAN, A-712-0010

• 3.2.30 INTERIOR WIRING, A-721-0001

• 3.2.31 CABLE SPLICING, A-721-0023

• 3.2.32 ADVANCED BASE POWER PLANT MAINTENANCE, A-721-0024

• 3.2.33 ELECTRIC MOTORS AND CONTROLS, A-721-0032

• 3.2.34 ELECTRICAL THEORY, A-721-0034

• 3.2.35 POWER TRAIN AND CHASSIS, A-610-0048

• 3.2.36 HYDRAULIC & PNEUMATIC SYSTEMS, A-610-0050

• 3.2.37 ENGINES, FUEL, AND ELECTRICAL SYSTEMS, A-610-0051

• 3.2.38 AUTOMOTIVE A/C, A-610-0052

• 3.2.39 ADVANCED DIAGNOSTICS AND SHOP MANAGEMENT, A-610-0053

• 3.2.40 CRANE MAINTENANCE AND INSPECTION, A-610-0055

3.0.2 TRAINING REQUIREMENTS

3.0.2 GENERAL: The contractor shall provide fully qualified instructors who demonstrate experience in the areas listed in the Performance Work Statement (PWS). In the event an instructor(s) has to be replaced, the replacement shall be as qualified or more qualified than the instructor(s) being replaced. The Government reserves the right to review and approve resumes for any instructor or Training Master Scheduler replacement.

3.0.2 TRAINING ENVIRONMENT: The services required hereunder shall be performed utilizing both of the following specific instructional environments (these training environments are provided and maintained by the Government).

• Legacy Environment (Group-Paced, Instructor-Led). This is traditional classroom instruction in a Navy resident schoolhouse environment. The contractor shall provide on-site instructors to teach the course.

• Legacy Lab Environment (Builder Projects, Instructor-Led). Exercises are conducted on-site builder projects in either an indoor lab or outside site project. The contractor shall provide on-site instructors for each project exercise.

3.0.3 TRAINING SCHEDULES: Training shall normally be conducted eight (8) hours a day five (5) days a week for the length of the course. However, the daily activity may extend beyond 8-hours if required to meet all training objectives outlined in the curriculum. Student remediation may be required and should be considered beyond the normal 8-hour training time for each class. During the execution of the class schedule where holidays or other events impact the expeditious movement of students through the training pipeline, the Naval Construction Training Center (NCTC) Site Director may extend the number of daily training hours to compensate, but not to exceed 40 hours per week per instructor.

3.0.4 CLASS CONVENINGS: NCTC Gulfport will establish class schedules. Any changes to class/course schedules will be established by NCTC Gulfport and forwarded to the contractor Training Master Scheduler for implementation.

3.0.5 CHANGES TO CURRICULUM: Only training materials and lesson plans promulgated by CSFE will be used in training delivery. It is recognized that certain portions of the course may become outdated based on a number of external factors. The contractor’s instructors are encouraged to identify and submit recommendations to the contractor’s Training Master Scheduler who recommends, makes changes and revisions to curriculum and submits such recommended changes and revisions to the NCTC Gulfport Site Director. However, the content of the instructional material shall not be modified until formally approved and implemented by CSFE. Any such contractor recommendations shall be at no additional cost to the Government and shall become the property of the Government.

3.0.6 ACADEMIC STANDARDS: All instructors shall adhere to and maintain academic standards (e.g., course grading criteria established by NCTC Gulfport) in accordance with assessment standards for the course. If the student(s) have academic problems, the instructor shall provide remediation to improve their course performance.

Academic standards for each course can be found in the testing section of the course curriculum.

3.0.7 CONTRACTOR RELATIONSHIP TO MILITARY AUTHORITIES: Contract instructors shall have the authority and are empowered to maintain their classrooms in an orderly and professional atmosphere.

3.0.7.1 COMPLAINTS AGAINST STUDENTS: Students are expected to conduct themselves in a professional and military manner. Students who fail to conduct themselves with the proper classroom decorum shall be cautioned by the contract instructor; if the inappropriate conduct continues, the student shall be referred by the contract instructor to the NCTC Site Director. In the event of any formal military action against students under their tutelage, contract instructors may be requested to provide written statements to or appear in person at Non-Judicial Punishment (NJP) or military Courts-Martial proceedings. Under no circumstance is a contract instructor to take disciplinary action against any student(s).

3.0.7.2 SITE MANAGEMENT: The Training Master Scheduler shall be designated as the Site Lead. In addition to performing duties outlined in paragraph 3.1, the individual shall provide overall management, supervision, and coordination of this contract and shall act as the local point of contact with the Government. The Site Lead shall have full authority to act for the contractor on all matters relating to daily operations of the contract. The contractor shall furnish, in writing, to the NCTC Gulfport Business Manager the name and contact information of the Site Lead no later than (15) calendar days after contract award. Providing a contractor Site Lead will be at no additional cost to the Government.

3.1 INSTRUCTOR SUPPORT SERVICES (TRAINING MASTER SCHEDULER):

The contractor shall provide a Training Master Scheduler to coordinate all training conducted by the Naval Construction Training Center Gulfport on site and scheduled off-site training. The contractor shall coordinate input from the Center for Seabees and Facilities Engineering (CSFE) and Naval Education and Training Command (NETC) regarding the number of classes, area of instruction, class size and schedule dates for proposed classes. The contractor shall make all arrangements for classroom availability and assignments, insure required training aids are made available for each class, coordinate and monitor all classrooms and laboratory facilities assigned to NCTC Gulfport, provide student rosters to assigned instructors.

• Serve as the single point of contact for all matters pertaining to “A” (Apprentice Training), C1 (Advance specialized skill training), D1 (Individual, not rating-specific professional development functional skill training), F1 (Individual skill or rating-specific functional training), and G1 (Pipeline skill progression Training) all related courses associated with NETC Seabee basic, intermediate and advanced training.

• Respond to all correspondence pertaining to “A”, C1, D1, F1, and G1 course issues.

• Ensure the essential NITRAS (Navy Integrated Training Resources and Administration System), CETARS

(Corporate Enterprise Training Activity Resource Systems [US Navy]) and Master Course Reference File

(Seabee University/Course Schedule) are current and in accordance with NCTC, NETC and CSFE directives.

• Draft and submit schedules to be used in the execution of Naval Technical Training conducted at NCTC Gulfport and off-site facilities.

• Maintain records and data pertaining to “A”, C1, D1, F1, and G1 school courses of instruction.

• Schedule and conduct weekly scheduling meetings between NCTC Gulfport, Schoolhouse Departments, D1 and F1 course coordinators, the Naval Construction Group Two (NCG2) and tenant Naval Mobile Construction Battalion (NMCB) training personnel.

• Develop and submit for approval and promulgation weekly C1, D1, F1, and G1 school course schedules.

• Identify scheduling conflicts, provide coordinated recommendations for approval and implement resolutions to scheduling issues to facilitate NCF unit D1 and F1 course training to the maximum extent.

• Inform government training department of, and propose resolutions to, issues arising from “A”, C1, D1, F1, and G1 school course completion packages.

• Assist the Business/Financial Management Department Head (N8) with matters pertaining to “A”, C1, D1, F1, and G1 scheduling and school costs associated with courses taught, Equipment Replacement Plans (ERPs) and information on schedules for reimbursable billings.

• Provide Command data for facilities level utilization and scheduling briefs pertaining to school courses.

• Ensure monthly Metrics brief is updated and ready for presentation.

• Coordinate/liaise with schoolhouse company commanders, course managers, D1 and F1 course coordinators, the NCG2 and tenant NMCB training personnel for approval on matters relating to naval technical training schedules and opportunities.

• Provide advance notice of technical training opportunities to schoolhouse company commanders, course managers, D1 and F1 course coordinators, the NCG2 and tenant NMCB training personnel of any approved changes to establish schedules to facilitate continued coordination and minimize discrepancies in student attendance.

• Receive telephone calls and visitors, answer inquiries concerning scheduling and coordinating courses.

• The contractor shall submit training schedules for the Catalog of Navy Training Courses (CANTRA) taught at NSTC Gulfport. Class scheduling is determined by the number of courses scheduled to convene throughout the fiscal year. Additional classes may be scheduled and courses added based on inter-service training requirements. Performance goals for Task 1 are:

1. Prepare for approval, various types of schedules used in the execution of NCTC training.

2. Ensure all courses and instructors are scheduled to meet NCTC Gulfport course requirements.

3. Collect, organize and prepare data for updating reports required for NCTC Gulfport related to training and scheduling.

HISTORICAL WORK DATA: FY22 historical data shows 155 classes were scheduled at NCTC Gulfport.

3.2 INSTRUCTOR SUPPORT SERVICES: The contractor shall provide qualified Inter-Service Builder Apprentice Training (BU-A) Instructors and qualified Advanced Instructors as outlined in paragraph 3.2.1 through

3.2.40 to meet the training requirements and schedule as determined by NCTC Gulfport under authority of CSFE, NETC and the CNO. Any contractor assigned to serve as an alternate and/or replacement shall be as qualified as the contractor they are replacing. Due to the high visibility of the NCTC training program, contractor deviations from the labor mix of instructors deemed necessary by the command to meet the training requirements and schedule must be justified in the management plan in detail to the satisfaction of the Commanding Officer NCTC Gulfport. The number of courses and student quotas are expected to approximately equal the number of courses that convened in FY22. The course descriptions are provided in paragraphs 3.2.1 through 3.2.40. These are the courses scheduled for FY23/FY24.

3.2.1 INTER-SERVICE BUILDER APPRENTICE TRAINING (BU-A NAVY) A-710-0010 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructors to provide training in the basic technical knowledge and basic practical skills in preparation for immediate usefulness as a Structural Apprentice for all Navy Seabee, Army and Air Force personnel requiring basic apprenticeship training. Contractor shall provide instruction in the use of builder tools. Contractor shall provide instruction in the selection of equipment and materials used in manufacturing woodshop projects; erecting light frame structures, suspended ceiling tile, hot tar roofing, three tab composition shingles, concrete masonry structure, concrete forms, windows to doorjambs and casting to scope.

Contractor shall provide instruction in installing, finishing drywall, installing door jambs with casing, installing baseboard and molding, installing composition floor tile and ceramic tile. Contractor shall provide instruction in the preparation and application of paint. Contractor shall provide instruction in mixing, transporting, placing and finishing concrete.

HISTORICAL WORK DATA: The BU-A course length is 48 instructional days in duration. Two (2) instructors are required to be present each day of the course. Thirty-three (33) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0010&p=1

3.2.2 STEELWORKER CLASS “A” USN BLOCK 0 A-711-0005 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide apprentice level training in construction mathematics, blueprint reading and basic layout, gas welding equipment, gas cutting, gas welding and brazing, silver brazing, vertical and flat arc welding, reinforcing steel, and fiber line.

HISTORICAL WORK DATA: The Steelworker (SW-A) Class A USN Block 0 course length is 27 instructional days in duration. An average of fifteen (15) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0005&p=1

3.2.3 STEELWORKER CLASS “A” USN BLOCK 1 A-711-0006 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide apprentice level training in basic sheet metal layout, pattern development, fabrication, and pre-engineered buildings including installation and maintenance of doors.

HISTORICAL WORK DATA: The Steelworker (SW-A) Class A USN Block 1 course length is 9 instructional days in duration. An average of fifteen (15) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_basic_search.html?p=1&q=a-711-0006

3.2.4 STEELWORKER CLASS “A” USN A-711-00XX COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide entry level training in (this course is currently under development and will replace both the SW Class A Block 0 and Block 1 courses. Updated data will be provided when it come available.

HISTORICAL WORK DATA: The Steelworker (SW-A) Class A USN course length is still to be determined.

Student throughput should be the same as SW-A Block 0. The course will be listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: TBD

3.2.5 CONSTRUCTION PLANNER AND ESTIMATOR SPECIALIST A-412-0012 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructor personnel to provide selected personnel with the knowledge and skills necessary to plan, estimate, schedule, and report on construction projects at existing Naval bases, advance bases and selected off-base sites during peacetime and contingency operations in accordance with the Construction Estimating, NTRP 4-04.2.3 and Seabee Crew Leader Handbook.

HISTORICAL WORK DATA: The Construction Planner and Estimator Specialist course is 50 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-412-0012&p=1

3.2.6 CONSTRUCTION PROJECT ESTIMATING A-412-0028 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to (this course is currently under development and will replace Construction Planning and Estimator Specialist A-412-0012).

HISTORICAL WORK DATA: The Construction Project Estimator course is estimated to be 50 instructional days in duration. Student throughput is estimated to be the same as Construction Planning and Estimator Specials, A-412- 0012. The course will be listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: TBD

3.2.7 CREW LEADER CONSTRUCTION MGT CONTINUUM TRAINING (CMCT) A-710-0051

COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide training for Naval Construction Force (NCF) personnel E4 and E5, the basic level III Construction management knowledge and skills necessary to perform as a crew leader on an NCF construction project, specifically duties related to planning and development of the project package, and tools for managing the day-to-day NCF construction activities.

HISTORICAL WORK DATA: The CMCT course is 18 instructional days in duration. Four (4) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0051&p=1

3.2.8 CONSTRUCTION PROJECT PLANNING AND SCHEDULING A-412-0029 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructor personnel to (this course is currently under development and will replace Crew Leader CMCT A-710-0051).

HISTORICAL WORK DATA: The Construction Project Planning and Scheduling course is estimated to be 18 instructional days in duration. Student throughput is estimated to be the same as Crew Leader CMCT, A-710-0051.

The course will be listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

TBD

3.2.9 SUPERVISOR LEVEL, CONSTRUCTION MANAGEMENT CONTINUUM TRAINING A-710-

0052: Contractor shall provide qualified instructor personnel to provide construction management training to Naval Construction Force (NCF) personnel E6 and above, Level II Construction Management knowledge and skills necessary to perform as a construction supervisor on one or more NCF construction projects, specifically the management and oversight duties related to project package, resource leveling, reporting, and interfacing with other agencies.

HISTORICAL WORK DATA: The CMCT Supervisor course is 9 instructional days in duration. Four (4) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0052&p=1

3.2.10 CONSTRUCTION PROJECT EXECUTION A-412-0030: Contractor shall provide qualified instructor personnel to (this course is currently under development and will replace Supervisor Level CMCT A-710-0052).

HISTORICAL WORK DATA: The Construction Project Planning and Scheduling course is estimated to be 9 instructional days in duration. Student throughput is estimated to be the same as Supervisor Level CMCT, A-710- 0052. The course will be listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: TBD

3.2.11 CONCRETE AND MASONRY A-710-0055 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide instruction in concrete and masonry construction principles and techniques to include site layout, forming “D” reinforcement placement and finishing, construction using concrete masonry units (CMU) block, lay-out and estimating.

HISTORICAL WORK DATA: The Concrete Masonry course is 25 instructional days in duration. Three (3) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 710-0055&p=1

3.2.12 STRUCTURE FRAMING A-710-0054 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction in Rough Carpentry framing principles and techniques that cover the following areas; floors, walls, roof frames and trusses.

HISTORICAL WORK DATA: The Structure Framing course is 20 instructional days in duration. Three (3) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 710-0054&p=1

3.2.13 INTERIOR AND EXTERIOR FINISHES A-710-0056 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction in interior and exterior finishes that incorporate the following areas; drywall, doors and windows, painting, ceilings, exterior finishes, stairs, interior trim and roofing applications.

HISTORICAL WORK DATA: The Interior and Exterior Finishes course is 35 instructional days in duration.

Three (3) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0056&p=1

3.2.14 HEAVY CONSTRUCTION I A-710-0044 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to builders E-3 and above in the knowledge and skills required to perform Heavy Timber Bridge construction. Instruction includes care for and use of an Engineer’s Level, develop sketches, layout, assemble and erect Heavy Timber construction projects using tools, equipment and materials from the Bridge and Dock Builders Tool Kit 80041.

HISTORICAL WORK DATA: The Heavy Construction I course is 5 instructional days in duration. Four (4) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 710-0044&p=1

3.2.15 HEAVY CONSTRUCTION II A-710-0045 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to builders E-2 to E-6 in the basic knowledge and skills required to plan and estimate materials, direct and assist in the safe conduct of NCF pile-driving operations using common pile-driving rigs using all types of piles. Instruction shall include appropriate High-Risk safety training.

Prepare simple drawings and construction specifications. Make accurate estimates of materials, equipment, and manpower requirements using the NAVFAC P-405. Establish and maintain a standard pile-driving log. Observe pile-driving operations.

HISTORICAL WORK DATA: The Heavy Construction II course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 710-0045&p=1

3.2.16 POWDER ACTUATED TOOLS A-710-0038 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to E-1 and above personnel leading to a Hilti Operators License. Instruction shall include the following in accordance with approved Hilti technical and tool operation manuals, safety, operations, cleaning and preventive maintenance on Hilti low velocity powder actuated tools to include only the 451 and 460 powder actuated tools.

HISTORICAL WORK DATA: The Powder Actuated Tools course is one (1) instructional day in duration. Four

(4) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0038&p=1

3.2.17 WELDING SUPERVISOR A-711-0031 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction for E-5 and above personnel. The course covers the necessary knowledge and skills to perform as a Welding Supervisor. Training includes review of management systems for welding supervisors, requirements of welds, detailed descriptions of welding processes, welding metallurgy, welding symbols, welding instructions, welding economics, the application of welding standards, welding inspection, health and safety, weld reports and records.

HISTORICAL WORK DATA: The Welding Supervisor course is 15 instructional days in duration. One (1) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0031&p=1

3.2.18 SHEETMETAL WORK A-711-0026 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction for steelworkers E4 through E6. Instruction shall provide steelworker trainees with the knowledge and skills required for pattern development and lay-out for sheet metal ductwork, to include square to round transitions, intricate and compound angles; 3 piece 90 degree elbow fabrication; lay-out and cut selected ductwork transitions to include elbows, branch connections, “T” and “Y” joints and end caps for pre-fabricated and one-off sheet metal ductwork pieces.

HISTORICAL WORK DATA: The Sheet Metal Worker course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 711-0026&p=1 https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0045&p=1 https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-710-0045&p=1

3.2.19 STEEL REINFORCING A-711-0027 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide steelworker trainees with the knowledge and skills necessary to understand and interpret construction prints and specifications, conduct material estimating of reinforcing steel from construction prints, create reinforcing steel bend schedules, and provide skills in cutting, bending, tying, and placing reinforcing steel. In addition, the trainee will utilize hand and power tools to cut and bend reinforcing steel to construction specifications. This course is a module of the Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Steel Reinforcing course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0027&p=1

3.2.20 GAS CUTTING AND WELDING A-711-0024 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Oxy-acetylene Brazing, Cutting and Welding (OAW) on brass, copper and mild carbon steel given construction prints and specifications; equipment set-up;

material selection and preparation; position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet. This course is a module of Steelworkers (SW) Advance Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Gas Cutting and Welding course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 711-0024&p=1

3.2.21 METAL FABRICATION AND LAYOUT A-711-0025 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6.

Instruction shall provide the knowledge and skills to Steelworkers in pipe-lay-out with steel squares, calculate welding offsets, use of pipe lay-out tools such as a contour marker, centering head, magnetic pipe levels and prefabricated pipe wrap-around; layout and cut selected pipe transitions to include elbows, branch connections, “T” and “Y” joints and end caps on mild steel pipe. This course is a module of Steelworker (SW) Advanced Pipeline (A- 711-0030).

HISTORICAL WORK DATA: The Metal Fabrication course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711- 0025&p=1

3.2.22 ARC WELDING (STRUCTURAL) A-711-0022 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Shielded Metal Arc Welding (SMAW) on structural steel given construction prints and specifications; equipment set-up; material selection and preparation;

position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet. This course is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Arc Welding course is 15 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0022&p=1

3.2.23 ARC WELDING (PIPE) A-711-0023 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Shielded Metal Arc Welding (SMAW) on structural steel pipe given construction prints and specifications; equipment set-up; material selection and preparation; position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet. This course is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Arc Welding (Pipe) course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0023&p=1

3.2.24 SHIELDED INERT GAS WELDING A-711-0002 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills necessary to identify, set-up, and maintain all items in the NMCB Combination Electric Arc Inert-Gas Welding Kit, perform gas metal arc and gas tungsten arc welding of ferrous and non-ferrous metals up to and including 3/8-inch thickness, including selection of welding wire and method. This is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Shielded Inert Gas Welding course is 15 instructional days in duration. Two

(2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-711-0002&p=1

3.2.25 TRANSPORTATION OPERATIONS A-730-0046 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to perform Transportation Supervisor duties, transport hazardous materials, plan line hauls, and operate manual truck-tractors using technical references, in normal field conditions.

HISTORICAL WORK DATA: The Transportation Operations course is 20 instructional days in duration. Three

(3) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-730-0046&p=1

3.2.26 EARTHWORK OPERATIONS A-730-0047 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to utilize geographic information systems to perform horizontal construction, trenching and road construction and maintenance using technical references, in normal field conditions.

HISTORICAL WORK DATA: The Earthwork Operations course is 25 instructional days in duration. Three (3) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 730-0047&p=1

3.2.27 PAVEMENTS A-730-0048 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to safely perform soil stabilization and asphalt operations in normal field conditions.

HISTORICAL WORK DATA: The Pavements course is 20 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-730- 0048&p=1

3.2.28 CONSTRUCTION INSPECTOR A-710-0022 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide personnel with the knowledge and skill factors to review and analyze project construction drawings and specifications and prepare a Construction Inspection Plan including a checklist of inspection points during critical phases of construction and installation. Verify that all materials and/or equipment ordered meet specifications and verify their conformance to those specifications upon receipt. Inspect all phases of construction and installation, including civil, architectural and structural, electrical and mechanical, for compliance with drawings, specification and acceptable safe operating, installation and construction practices. Coordinate and observe specified tests on materials, electrical and mechanical systems (including operational tests on installed equipment) and ensures the contractor performs quality control tests on such items as sub base materials, aggregates and cementations for binding and on related mixes before, during and after installation. Upon receipt of all test results, the inspector analyzes the results for compliance with given specifications, prepares logs, records and reports on all inspections and tests.

HISTORICAL WORK DATA: The Construction Inspector course is 40 instructional days in duration. Two (2) classes were taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website: https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A- 710-0022&p=1

3.2.29 TOOL AND EQUIPMENT MAINTENANCE TECHNICIAN A-712-0010 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructor personnel to provide advanced technical training in the installation, repair and maintenance of construction tools and equipment. To provide technical training in the installation, repair and maintenance of carpenter shop equipment, blade reconditioning equipment, portable, power, and hand tools. To provide instruction in procedures for establishing preventive maintenance schedules, set up and maintenance of manufacturer's and technical file, of recommended maintenance and operating procedures for construction battalion central tool rooms.

HISTORICAL WORK DATA: The Tool and Equipment Maintenance Technician course is 36 instructional days in duration. One (1) class was taught in fiscal year 2022. The course is listed in CANTRAC (Catalog of Navy Training) and can be found on the following Website:

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-712-0010&p=1

3.2.30 INTERIOR WIRING A-721-0001 Contractor shall provide qualified instructor personnel to provide advanced technical training in the technical knowledge and practical skills necessary for a Construction Electrician to utilize the National Electric Code (NEC), installation of explosion proof fixtures and devices, installation of photocells, installation of thermostats, utilization of the fish tape, conductor installation system, utilization of the heavy duty cable puller, threading and bending large conduits.

HISTORICAL WORK DATA: The Interior Wiring course is 15 instructional days in duration. Three (3) class was taught in fiscal year 2022 and four (4) classes are currently scheduled to be taught in fiscal year 2023.

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-721-0001&p=1

3.2.31 CABLE SPLICING A-721-0023: Contractor shall provide qualified instructor personnel to provide advanced instruction on the techniques and procedures for joining power cable employing straight and branched splices; termination and dead ends, testing and fault finding of cable system. Splice underground and aerial communications cable including cable terminations. Construct bridge and straight splices in plastic sheathed communication cable. Locate faults using appropriate equipment, techniques and safety precautions. Splice and terminate fiber optic cable with mechanical and fusion splices. Use OTDR and power meter for testing and fault finding.

HISTORICAL WORK DATA: The Cable Splicing course is 45 instructional days in duration. Two (2) class was taught in fiscal year 2022 and two (2) classes are currently scheduled to be taught in fiscal year 2023.

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-721-0023&p=1

3.2.32 ADVANCED BASE POWER PLANT MAINTENANCE A-721-0024: Contractor shall provide qualified instructor personnel to provide advanced instruction on the installation procedures, operation of an Advanced Base Power Plant in single and parallel operation. Maintenance and troubleshooting of Advanced Base Power Plants and associated equipment, is also covered.

HISTORICAL WORK DATA: The Advanced Base Power Plant course is 10 instructional days in duration. Three

(3) class was taught in fiscal year 2022 and four (4) classes are currently scheduled to be taught in fiscal year 2023.

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-721-0024&p=1

3.2.33 ELECTRIC MOTORS AND CONTROLS A-721-0032: Contractor shall provide qualified instructor personnel to provide advanced instruction on wiring motor controllers for auto transformer, resistance, and star-delta starting. Perform technical maintenance to include coils, relays, contacts, and switches. Establish a preventive maintenance program.

HISTORICAL WORK DATA: The Electric Motors and Controls course is 10 instructional days in duration.

Three (3) class was taught in fiscal year 2022 and four (4) classes are currently scheduled to be taught in fiscal year 2023. https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-721-0032&p=1

3.2.34 ELECTRICAL THEORY A-721-0034: Contractor shall provide qualified instructor personnel to provide advanced instruction on the technical knowledge and practical skills necessary for assignment as an electrical crew supervisor. Electrical theory, the installation, maintenance, and troubleshooting of solid-state devices in peacetime and contingency operations under limited supervision.

HISTORICAL WORK DATA: The Electrical Theory A-721-0034 course is 10 instructional days in duration.

Three (3) class was taught in fiscal year 2022 and four (4) classes are currently scheduled to be taught in fiscal year 2023. https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-721-0034&p=1

3.2.35 POWER TRAIN AND CHASSIS A-610-0048: Contractor shall provide qualified instructor personnel to provide advanced instruction on the disassemble, clean, repair, adjust, and assemble standard transmissions, transfer cases, power take-off units, drive shafts, differentials, front drive axels, track-chains, pivot brakes, final drives, sprockets, idlers, rollers, and track pads.

HISTORICAL WORK DATA: The Power Train and Chassis A-610-0048 course is 25 instructional days in duration. Four (4) class was taught in fiscal year 2022 and six (6) classes are currently scheduled to be taught in fiscal year 2023. https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-610-0048&p=1

3.2.36 HYDRAULIC & PNEUMATIC SYSTEMS A-610-0050: Contractor shall provide qualified instructor personnel to provide advanced instruction on construct and operate a hydrostatic system using components common to a typical hydraulic system. Assemble a hydraulic hose and fitting assembly and test under normal working pressures; connect and operate a flow meter to determine hydraulic system problems, troubleshoot and operate hydraulic system using logical troubleshooting sequence. Use basic knowledge to test electro hydraulic valves.

HISTORICAL WORK DATA: The Hydraulic & Pneumatic Systems A-610-0050 course is 10 instructional days in duration. Four (4) class was taught in fiscal year 2022 and six (6) classes are currently scheduled to be taught in fiscal year 2023.

https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-610-0050&p=1

3.2.37 ENGINES, FUEL, AND ELECTRICAL SYSTEMS A-610-0051: Contractor shall provide qualified instructor personnel to provide advanced instruction on troubleshoot, analyze, and isolate diesel fuel system malfunctions on various types of fuel systems. Perform minor and major adjustments to fuel system components consisting of setting racks, governors, and timing fuel pumps to engines; adjust engine speeds, both minimum and maximum; adjust starting valve linkage and any other components that affect engine performance. Take record, and evaluate compression readings. Disassemble, inspect, repair, assemble, test and adjust diesel fuel system components (including mechanical and hydraulic governors) in accordance with manufacturer’s specifications.

Test, diagnose, charge and repair batteries. Read and interpret equipment electrical diagrams and schematics.

Troubleshoot and repair electrical system malfunctions. Service and analyze starting and chagrining system malfunctions on all types of automotive, materials handling and construction equipment. Disassemble, inspect, bench test, repair and assemble starting motors, DC Generators, AC Alternators and other electrical components of the starting and charging circuits.

HISTORICAL WORK DATA: The Engines, Fuel, and Electrical Systems A-610-0051 course is 30 instructional days in duration. Four (4) class was taught in fiscal year 2022 and six (6) classes are currently scheduled to be taught in fiscal year 2023. https://app.prod.cetars.training.navy.mil/cantrac/pages/rpt_cin_detail.html?cin=A-610- 0051&p=1

3.2.38 AUTOMOTIVE A/C A-610-0052: Contractor shall provide qualified instructor personnel to provide advanced instruction on the advanced technical training to diagnose and repair air conditioning systems in both normal field and shop conditions.

HISTORICAL WORK DATA: The Automotive A/C A-610-0052 course is 5 instructional days in duration. Four