Performance Work Statement.pdf

USATA-NG-0026-20

Attachment 01

PERFORMANCE WORK STATEMENT

FOR THE REPAIR CALIBRATION OF ACOUSTIC CALIBRATOR

MODEL: 4226

1.0 GENERAL. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to acquire commercial calibration, by the original equipment manufacturer, Bruel & Kjaer, Inc. of Norcross GA for one (1) Acoustic Calibrator, Model 4226;

located at USATA’s Army Primary Standards Laboratory, Redstone Arsenal, AL (APSL).

2.0 GOVERNMENT TASKS.

The U.S. Army TMDE Activity, Redstone Arsenal, AL (Acceptance DODAAC: W80RA6) shall be responsible for receiving, inspection and acceptance in DFAS Wide Area Workflow (WAWF) for all units.

3.0 CONTRACTOR TASKS.

3.1 Model 4226, serial number 2288485, unit will not stabilize at multiple frequencies. This unit will require factory repair and calibration, restoring the units to factory specifications. Accredited calibration is required compliant to ISO/IEC 17025. As a minimum, a calibration report with the following will be included: as found data, as left data, calibration standards used, and the measurement uncertainty.

3.2 The Contractor shall furnish all labor, material and equipment required to provide calibration in accordance with the manufacturer’s specifications.

3.3 The Contractor shall not provide repair or other services outside the scope of this contract without authorization from the government Contracting Officer.

4.0 PLACE OF PERFORMANCE. Performance shall take place at the contractor’s facility.

5.0 PERIOD OF PERFORMANCE. In accordance with Section B of the contract.

6.0 GOVERNMENT-FURNISHED EQUIPMENT. None.

7.0 QUALITY REQUIREMENTS. Not Applicable.

8.0 CONTRACTOR MANPOWER REPORTING REQUIREMENT – SERVICE CONTRACTS.

8.1 Department of the Army requires reporting of all contractor labor hours associated with services, to include calibration and repair, provided to United States Army organizations;

therefore,

8.2 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contractor for the U.S. Army TMDE Activity via secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: https://cmra.army.mil, and then click on “Department of the Army CMRA” or the icon of the DOD organization that is receiving or benefiting from the contracted services.

https://cmra.army.mil/

USATA-NG-0026-20

Attachment 01

8.3 Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2019. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website.