PE_6606_-_Litter_Truck_Body_-_Full_Drawing_Set.pdf
PDF 19 MB Posted
- Solicitation number
- 32-12-6606
- Issued by
- California
About this file
This document is a detailed engineering and manufacturing drawing set for a specialized truck body and associated components, created for Caltrans (California Department of Transportation). The technical drawings, designated as PE 32-12-6606, comprehensively detail the design and specifications for a custom truck body assembly, including multiple subcomponents such as side boards, doors, deck, braces, cover, personnel bucket, and various mounting hardware. The drawings provide precise dimensional specifications, material requirements, and manufacturing instructions, following Caltrans Equipment Quality Standards, with each page meticulously illustrating different views, sections, and details of the truck body components at various scales.
The drawings specify strict manufacturing requirements, including removing burrs and sharp edges, ensuring metal surface cleanliness before welding, and using specific welding techniques to minimize distortion. Material specifications include hot-rolled steel sheets, mechanical steel tubes, and specific welding requirements. Post-manufacturing instructions include applying Sikaflex-521 UV-resistant white sealant to non-welded joints and ensuring all welds, electrical work, and painting comply with Caltrans Equipment Quality Standards. The level of detail suggests this is a custom engineering project for specialized transportation equipment, with a focus on precision, durability, and adherence to strict manufacturing and quality control standards.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB_32-12-6606_Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNLESS OTHERWISE SPECIFIED:
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
9' LITTER TRUCK BODY
121089
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
DEPARTMENT OF TRANSPORTATION
BILL OF MATERIALS
EQUIPMENT, OFFICE OF ENGINEERING AND
.03"
.005"THREE PLACE DECIMAL
MATERIAL
ANSI Y14.5-2009
A
RE
V
F
D
SHEET 1 OF 1
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
2608.22
CONFIDENTIAL AND PROPRIETARY TOP ASSEMBLY & ACCESSORIES
DESIGNER
INTERPRET GEOMETRIC
TWO PLACE DECIMAL
A
DRAWN
FINISH
DIVISION OF EQUIPMENT
PRODUCTION.
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
3/6/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 3/06/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 LITTER BODY PERSONNEL BUCKET ASSEMBLY 118859
2 1 9' LITTER TRUCK BODY 118245
SEE DWG #118859
SEE DWG #118245
PE 32-12-6606PAGE 1 OF 48
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND 7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
FRONT
6 PLCS
RIGHT REAR CORNER
SCALE 1:8
ISOMETRIC VIEW
ASSEMBLY, TRUCK BODY
RIGHT SIDE
LEFT SIDE
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, DECK 118265
2 1 ASSEMBLY, FRONT HEADBOARD 118352
3 1 ASSEMBLY, RIGHT SIDE BOARD, MIDDLE 118356R
4 1 ASSEMBLY, LEFT SIDE BOARD, MIDDLE 118356L
5 2 ASSEMBLY, REAR DOOR 118317
6 1 ASSEMBLY, COVER 118247
7 2 ASSEMBLY, FRONT DOOR 118290
8 1 ASSEMBLY, SIDE BOARD, LEFT 118371L
9 1 ASSEMBLY, SIDE BOARD, RIGHT 118371R
10 2 ASSESMBLY, SIDE DOOR 118336
11 1 SUB ASSY, LIGHT RACK 121061
12 1 3" X 1-1/2" X 1/8" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A500 118402
13 2 1/2" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 120637
14 2 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120638
15 1 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120639
16 4 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118480
17 4 1/4" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 118500
18 8 LIFT-OFF HINGE W/O HOLES, ZINC-PLATED LOW
CARBON STEEL, 1-1/4" X 2-11/16" DOOR LEAF
MCMASTER
15195A49 OR EQUIV
19 7
LIFT-AND-DROP BARREL SLIDE-BOLT LATCH, EASY-
GRIP, ZINC-PLATED STEEL, 3" WIDE X 1-3/4" HIGH, 1/2"
BOLT
MCMASTER
3356A77 OR EQUIV
20 3 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120928
21 4 HEX HEAD BOLT, 3/8"-16 UNC-2A x 3-1/4" LONG, 1"
THREADED, GRADE 8, ZINC YELLOW-CHROMATE
PLATED
22 8 SAE WASHER, 3/8" SCREW SIZE, 0.812" OD, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
23 4 LOCKNUT, NYLON INSERT, 3/8"-16 UNC-2B, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
24 6 HEX HEAD BOLT, 7/16"-14 UNC-2A x 1-1/2" LONG, FULLY THREADED, GRADE 8, ZINC YELLOW-
CHROMATE PLATED
25 12 SAE FLAT WASHER, 7/16" SCREW SIZE, 0.922" OD,
GRADE 8, ZINC YELLOW-CHROMATE PLATED .
26 6 LOCKNUT, NYLON INSERT, 7/16"-14 UNC-2B, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
SEE DWG #118265
SEE DWG #118352
SEE DWG #118356
SEE DWG #118371
SEE DWG #118356
SEE DWG #118317
SEE DWG #118247
SEE DWG #118290
SEE DWG #118371
SEE DWG #118336
SEE DWG #121061
EQUIPMENT, OFFICE OF ENGINEERING AND
DEPARTMENT OF TRANSPORTATION
PRODUCTION.
118245
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3
FINISH
F
THREE PLACE DECIMAL .005"
DESIGNER
CONFIDENTIAL AND PROPRIETARYTWO PLACE DECIMAL
ASSEMBLY, TRUCK BODY
INTERPRET GEOMETRIC
BILL OF MATERIALS
E
F
9' LITTER PICKER BODY
RE
V
SHEET 1 OF 8
DRAWN
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME
A
ENG APPR.
D
DATE
DIVISION OF EQUIPMENT
MATERIAL
A
ANSI Y14.5-2009
E
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
PE 32-12-6606PAGE 2 OF 48
4"
TYP
OPP SIDE
16"
TYP
THIS SIDE & OPP SIDE
16"
TYP
THIS SIDE & OPP SIDE
SCALE 1:7
ASSEMBLY, TRUCK BODY
RIGHT SIDE VIEW
TYP
OPP SIDE
OPP SIDE
SCALE 1 : 2
TYP
DETAIL E
OPP SIDE
TYP
8"
TYP
OPP SIDE
TYP
8"18
OPP SIDE
4"
TYP
OPP SIDE
TYP
OPP SIDE
OPP SIDE
SCALE 2 : 5
TYP
DETAIL A
OPP SIDE
TYP
TYP
OPP SIDE
5 16"
TYP
OPP SIDE
"16
"16
3 OPP SIDE
TYP
TYP
4"41
OPP SIDE
OPP SIDE
TYP
"8
8"
TYP
OPP SIDE
SCALE 1 : 3
DETAIL B
REF10
5"
TYP
OPP SIDE
28"
TYP
OPP SIDE
DETAIL D
SCALE 1 : 1
10 REF16
3 " TYP
8" TYP
THIS SIDE& OPP SIDE
DETAIL C
SCALE 1 : 1
TYP
THIS SIDE AND OPP SIDE
TYP
WELD PIN IN PLACE
TRIM ENDS
TYP
THIS SIDE & OPP SIDE
TYP
THIS SIDE & OPP SIDE
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
9' LITTER PICKER BODY
RE
V
SHEET 2 OF 8
WEIGHT
118245
A
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
TWO PLACE DECIMAL
ANSI Y14.5-2009TOLERANCING PER:
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
-USE SLIDE BOLT
TO LOCATE POSITION
-TYP
-OPP SIDE
PE 32-12-6606PAGE 3 OF 48
SCALE 1:7
ASSEMBLY, TRUCK BODY
REAR VIEW
ASSEMBLY, TRUCK BODY
LEFT SIDE VIEW
SCALE 1:8
SCALE 1 : 3
DETAIL F
TO LOCATE POSITION
USE SLIDE BOLT
1919 REF 1
"1
16"
DETAIL G
SCALE 1 : 3
SCALE 1 : 3
DETAIL H
DETAIL I
SCALE 1 : 3
9' LITTER PICKER BODY
118245
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 12
E
A
.005"
DESIGNER
.03"
DATE
RE
V
DEPARTMENT OF TRANSPORTATION
D
SHEET 3 OF 8
ENG APPR.
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
F
INTERPRET GEOMETRIC
DRAWN
NAME
ASSEMBLY, SIDE BOARDS
TWO PLACE DECIMAL CONFIDENTIAL AND PROPRIETARY
FINISH
DIVISION OF EQUIPMENT
MATERIAL
THREE PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
PE 32-12-6606PAGE 4 OF 48
-TYP
-OPP SIDE
TO LOCATE POSITION
SCALE 1:10
-USE BARREL BOLT
ASSEMBLY, TRUCK BODY
RIGHT SIDE VIEW
ASSEMBLY, TRUCK BODY
TOP VIEW
SCALE 1:10
MM
TYP
OPP SIDE
SCALE 2 : 3
DETAIL L
SCALE 2 : 3
DETAIL J
OPP SIDE
TYP
TYP
OPP SIDE
16"
TYP
-USE BARREL-BOLT
-OPP SIDE
TO LOCATE POSITION
OPP SIDE
-TYP
SCALE 2 : 3
DETAIL K
TYP
TYP
OPP SIDE
16"
TYP
TYP
OPP SIDE
SCALE 2 : 3
DETAIL M
DETAIL N
REF
SCALE 1 : 3
4 PLCS
O
O
MATCH DRILL FOR HARDWARE
TYP - OPP SIDE
SCALE 1 : 1
SECTION O-O
DEPARTMENT OF TRANSPORTATION
D
118245
WEIGHT
PRODUCTION.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
9' LITTER PICKER BODY
.005" .03"
DATE
ENG APPR.
F
A
RE
V
SHEET 4 OF 8
DESIGNER
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
INTERPRET GEOMETRIC
DRAWN
NAME
ASSEMBLY, TRUCK BODY
TWO PLACE DECIMAL CONFIDENTIAL AND PROPRIETARY
FINISH
DIVISION OF EQUIPMENT
MATERIAL
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
1 : 6
SECTION M-M
SCALE
PE 32-12-6606PAGE 5 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 5 OF 8
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
TWO PLACE DECIMAL .03"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, TRUCK BODY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118245
WEIGHT
2/3/2025
8 REF
ASSEMBLY, TRUCK BODY
RIGHT FRONT CORNER
ISOMETRIC VIEW
SCALE 1:12
TYP
OPP SIDE
SCALE 1 : 3
DETAIL S
OPP SIDE
TYP
SCALE 1 : 2
DETAIL Q
REF
ASSEMBLY, TRUCK BODY
RIGHT REAR CORNER
ISOMETRIC VIEW
SCALE 1:12
SCALE 1 : 2
DETAIL W
ASSEMBLY, TRUCK BODY
LEFT FRONT CORNER
ISOMETRIC VIEW
SCALE 1:12
SCALE 1 : 2
DETAIL T
TYP
OPP SIDE
WRAP AROUND CORNERS
SCALE 1 : 3
TYP
DETAIL RTYP
OPP SIDE
WRAP AROUND CORNERS
OPP SIDE
SCALE 1 : 3
DETAIL U
TYP
OPP SIDE
WRAP AROUND CORNERS
OPP SIDE
TYP
OPP SIDE
TYP
1-4
OPP SIDE
SCALE 1 : 2
DETAIL V
TYP
SCALE 1 : 2
DETAIL P
OPP SIDE
TYP
OPP SIDE
TYP
1-4
TYP
OPP SIDE
NOT SHOWN
-ASSEMBLY, FRONT DOOR 118290
-ASSEMBLY, COVER 118247
PE 32-12-6606PAGE 6 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 6 OF 8
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, TRUCK BODY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118245
WEIGHT
2/3/2025NOT SHOWN
-ASSEMBLY, FRONT DOOR 118290
-ASSEMBLY, COVER 118247
ASSEMBLY, TRUCK BODY
BOTTOM LEFT REAR CORNER
ISOMETRIC VIEW
SCALE 1:10
ASSEMBLY, TRUCK BODY
BOTTOM LEFT FRONT CORNER
ISOMETRIC VIEW
SCALE 1:10
OPP SIDE
SCALE 1 : 3
DETAIL Y
TYP
REF2
OPP SIDE
TYP
1-2 1-2
TYP
OPP SIDE
TYP
OPP SIDE
SCALE 1 : 3
DETAIL X
9 REF 1-2
1-2
TYP
SCALE 1 : 2
DETAIL Z
OPP SIDE
REF
1-2
1-2
PE 32-12-6606PAGE 7 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 7 OF 8
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, TRUCK BODY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118245
WEIGHT
2/3/2025
SCALE 1 : 5
DETAIL BB
20 20 20
1-6 1-6
TYP
3 PLCS
3" 333 8" 333
8"
SCALE 1 : 2
DETAIL AA
OPP SIDE
TYP
TYP
OPP SIDE
11 REF
ASSEMBLY, TRUCK BODY
TOP VIEW
SCALE 1:10
REF
ASSEMBLY, TRUCK BODY
LEFT FRONT CORNER
ISOMETRIC VIEW
SCALE 1:8
NOT SHOWN
-ASSEMBLY, FRONT DOOR 118290
-ASSEMBLY, COVER 118247
ASSEMBLY, TRUCK BODY
REAR VIEW
SCALE 1:10
PE 32-12-6606PAGE 8 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
RE
V
SHEET 8 OF 8
WEIGHT
118245
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
3" STK
" STK1
64" STK
"413
2"
R1 8"
1R 4"
4"
R1 8"
118500
SCALE 1:1
3"
2"
R1 4"
UP 90.0° R 1/8"
120639
CT FLAT PATTERN
SCALE 1:1
2.997
2.000
1.624
"413
4"
R1 8"
R 1/8"
UP 90.0°
120638
CT FLAT PATTERN
SCALE 1:1
"811
2.250
120639
SCALE 1:1
3R 4"
2"
"3
5 "
8"
R1 8"
"821
8"
R1 8"
120928
SCALE 1:2
1 "2 5 "16
"271
"16
"82323 8" R1
8"
R1 8"
118480
SCALE 1:1
32"
2"
"1 4
1 "R 2
4"
120638
SCALE 1:2
"421
"1
4"
R1 8"
118402
SCALE 1:3
8"
UP 90.0° R 1/8"
120928
CT FLAT PATTERN
SCALE 1:1
3.016
1.008
7.500
120637
SCALE 1:1
"21
3"
R1 8"
R1
PE 32-12-6606PAGE 9 OF 48
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
RE
V
F
118265
9' LITTER PICKER BODY
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, DECK
D
SHEET 1 OF 11
A
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
INTERPRET GEOMETRIC
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
118265
ASSEMBLY, DECK
RIGHT REAR ISOMETRIC VIEW
SCALE 1:10
3-12
3-12
TOP VIEW
SCALE 1:10
118265
ASSEMBLY, DECK
1/16 1/161/16
1/16 1/16
1/16 1/16
1/16
1-4
3-12
2"
8"
AA
DETAIL C
SCALE 1 : 2
REF
TYP
OPP SIDE
1 : 10
SECTION A-A
SCALE
C
B
B
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/22/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, SIDE RAILS TO FRAME 118407
2 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118280
3 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118281
4 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118282
5 2 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118815
6 2 3/16" THICK PLATE, A36 STEEL, DRY, LASER QUALITY,
HOT ROLLED, PICKLED & OILED PER ASTM A36 120886
7 15 10-32 x 3/4" WELD STUD 118266
SECTION B-B
SCALE
OPP SIDE
2X
1 : 2
TYP
TYP
OPP SIDE
PE 32-12-6606PAGE 10 OF 48
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
BILL OF MATERIALS
RE
V
WEIGHT
118265
.03"TWO PLACE DECIMAL
DIVISION OF EQUIPMENT
SHEET 2 OF 11
D
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
.005"
A
INTERPRET GEOMETRIC
MATERIAL
ASSEMBLY, DECK
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
6 3-12
1 : 5
SECTION D-D
SCALE
3-12 3-12 6
3-12 EE
SECTION M-M
SCALE
1 : 5
15X
TYP
15 PLCS
8" X 14
REF
REF
118265
ASSEMBLY, DECK
BOTTOM LEFT REAR ISOMETRIC VIEW
SCALE 1:10
118265
ASSEMBLY, DECK
TOP VIEW
SCALE 1:10
DD
MM
SCALE 1 : 5
SECTION E-E
REF
2-4
2-4
TYP
"2
2"
PE 32-12-6606PAGE 11 OF 48
1"
8"
16"
D
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 3 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
118281
SCALE 1:8
37"
91"
CL
SCALE 1:5
118280
CL
91"
35"
16"
35"
UP 90.0° R 1/4"
UP 90.0° R 1/4"
120886
CT FLAT PATTERN
SCALE 1:3
8.000
1.000
1.000
34.000
118282
SCALE 1:8
3 "29 4
4"
3 "1 16
R1 4"
8"
118815
SCALE 1:1
"827
1"
2"R1 4"
120886
SCALE 1:3
34"
PE 32-12-6606PAGE 12 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
BILL OF MATERIALS
SHEET 4 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
A
RE
V
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
.005"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, BRACE TO FRAME 118409
2 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118272
3 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118273
4 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118278
5 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118268
6 7 10-32 x 3/4" WELD STUD 118266
118407
ASSEMBLY, SIDE RAILS TO FRAME
RIGHT REAR ISOMETRIC VIEW
SCALE 1:8
DETAIL G
SCALE 1 : 2
TYP
OPP SIDE
OPP SIDE
SCALE 1 : 2
TYP
DETAIL I
TYP
OPP SIDE
TYP
OPP SIDE
2-6
LEFT FRONT ISOMETRIC VIEW
SCALE 1:8
118407
ASSEMBLY, SIDE RAILS TO FRAME
DETAIL F
SCALE 1 : 3
OPP CORNER
TYP
1-2
DETAIL H
SCALE 1 : 2
OPP SIDE
PE 32-12-6606PAGE 13 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 5 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
TYP
OPP SIDE OPP SIDE
TYP
1-2
REF
REF2
REF3
REF
118407
ASSEMBLY, SIDE RAILS TO FRAME
TOP VIEW
SCALE 1:12
JJ
K K
118407
ASSEMBLY, SIDE RAILS TO FRAME
SIDE VIEW
SCALE 1:12
L
L
SCALE 1 : 4
6 SECTION L-L
7X
TYP
7 PLCS9" 11" 9" 9" 9" 11"14"
8"
OPP SIDE
TYP
SCALE
SECTION J-J
1 : 4
2 REF
REF
OPP SIDE
TYP
TYP
1-2OPP SIDE
OPP SIDE
TYP
OPP SIDE
TYP
TYP
1-2
OPP SIDE
OPP SIDE
TYP
OPP SIDE
TYP
TYP
OPP SIDE
TYP
OPP SIDE
TYP
1 : 3 SCALE
SECTION K-K
OPP SIDE
OPP SIDE 1-2
TYP
1-2OPP SIDE
PE 32-12-6606PAGE 14 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
PRODUCTION.
RE
V
SHEET 6 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
SIDE VIEW
SCALE 1:4
118272
FRONT VIEW
72"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118272
CT FLAT PATTERN
SCALE 1:4
9.333
2.049
2.018
72.000
SCALE 1:4
118273
FRONT VIEW
72"
TOP VIEW
TOP VIEW
SIDE VIEW
"821
2"
R9 64"
"251
8"
R9 64"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118273
CT FLAT PATTERN
SCALE 1:4
9.333
2.018
2.049
72.000
PE 32-12-6606PAGE 15 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 7 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
SCALE 1:4
118278
FRONT VIEW
4"
SCALE 1:4
118268
FRONT VIEW
"275 X 8
"4951
3 X 41 2"
UP 90.0° R 9/64"
118278
CT FLAT PATTERN
SCALE 1:4
7.099
1.95649.750
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118268
CT FLAT PATTERN
SCALE 1:4
9.907
.893
1.893
95.250
SIDE VIEW
"1621
4"
R9 64"
TOP VIEW
SIDE VIEW
1"
"75
2"
R9 64"
TOP VIEW
PE 32-12-6606PAGE 16 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
BILL OF MATERIALS
SHEET 8 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
A
RE
V
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118267
2 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118269
3 3 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118270
4 6 1/4" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 118279
5 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118283
6 2
6 X 2 X 3/16 WALL SQUARE TUBE, MECHANICAL STEEL,
PICKLED & OILED, ASTM A500 118284
7 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120894
ASSEMBLY, BRACE TO FRAME
SCALE 1:5
RIGHT REAR ISOMETRIC VIEW
118409
PE 32-12-6606PAGE 17 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
SHEET 9 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
RE
V
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
14 PLCS
TYP
14 PLCS
TYP
1 : 5
SECTION J-J
SCALE
TYP
8 PLCS
TYP
8 PLCS
8"
TYP
6PLCS
REF
REF
REF
REF
REF
REF
REF
CL
CENTERLINE
SYMMETRIC ABOUT
ASSEMBLY, BRACE TO FRAME
SCALE 1:8
TOP VIEW
118409
REF
REF
8"
5 "
23"
16" 34"
50"
68"
104" 122"
86"
JJ
CL
PE 32-12-6606PAGE 18 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 10 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
FRONT VIEW
FRONT VIEW
TOP VIEW
SIDE VIEW
"211
16"
R9 64"
118267
SCALE 1:4
8"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118267
CT FLAT PATTERN
SCALE 1:5
9.010
2.018
2.018 36.125
"211
16"
R9 64"
118269
SCALE 1:3
8"
SIDE VIEW
8"
R9 64"
TOP VIEW
UP 90.0° R 9/64"
SCALE 1:5
118269
CT FLAT PATTERN
UP 90.0° R 9/64"
7.760
1.393
1.39336.125
120894
SCALE 1:3
4"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
120894
CT FLAT PATTERN
SCALE 1:3
7.760
1.393
1.39395.250
PE 32-12-6606PAGE 19 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 11 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
FRONT VIEW
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118270
CT FLAT PATTERN
SCALE 1:3
1.393
1.393
7.760
33.750
118283
SCALE 1:1
"817
8"
R1 4"
TOP VIEW
SIDE VIEW
6"
2"
16"
118270
SCALE 1:4
4"
SCALE 1:3
118284
FRONT VIEW
122"
SIDE VIEW
"211
16"
R9 64"
118279
SCALE 1:2
5 "1 8
"857
"857
R1"
135.0°
8"
PE 32-12-6606PAGE 20 OF 48
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
WEIGHT
118352
9' LITTER PICKER BODY
SHEET 1 OF 2
A
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
.005"
PRODUCTION.
INTERPRET GEOMETRIC
MATERIAL
ASSEMBLY, FRONT HEADBOARD
79.93
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/29/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/29/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 HEADBOARD FRAME WELDMENT 118354
2 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118475
3 2 1/4" THICK PLATE, A36 STEEL, DRY, LASER QUALITY, A36
STEEL HOT ROLLED, PICKLED & OILED PER ASTM A36 121060
4 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121068
5 4 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121094
6 3 10-32 x 3/4" WELD STUD .
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST.
TYP
SECTION A-A
OPP SIDE
OPP SIDE
TYP
OPP SIDE
TYP
"4
4"
OPP SIDE
FRONT VIEW
1-4
3X
2-4
TYP
TYP
8"
11 4
8"
4"
A
A
118352
SCALE 1:4
ASSEMBLY, FRONT HEADBOARD
ISOMETRIC VIEW
SCALE 1 : 2
DETAIL B
"4
4"
TOP VIEW
4"
TYP
DETAIL D
4 PLCS
SCALE 1 : 2
2-4 2-4
TYP
2 PLCS
PE 32-12-6606PAGE 21 OF 48
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
118352
CONFIDENTIAL AND PROPRIETARY
9' LITTER PICKER BODY
ASSEMBLY, FRONT HEADBOARD
D
SHEET 2 OF 2
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/29/2025
411 "
6"
8"
3"
R9 64"
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 HEADBOARD FRAME WELDMENT 118354
1.1 2
3" X 2" X 3/16" WALL, 40" LONG, WALL RECTANGULAR
TUBE, MECHANICAL, STEEL PICKLED & OILED PER
ASTM A513
1.2 1
3" X 2" X 3/16" WALL, 29-3/4" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
SIDE VIEW
NOTE:
DIMENSIONS NOT SPECIFIED TO BE DERIVED FROM CAD FILE.
121068
SCALE 1:4
131 4"
2"
118354
FRONT VIEW
1.2
1.11.1
SCALE 1:4
TYP
OPP SIDE
40"
3 "
4"
OPP SIDE
TYP
TOP VIEW TYP
OPP SIDE
TYP
OPP SIDE
UP 90.0° R 9/64"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118475
CT FLAT PATTERN
SCALE 1:3
29.625
2.946
1.764
.748
FRONT VIEW
R1 8"
8"
118475
SCALE 1:3
121060
SCALE 1:2
1/2" X 45°
1/2" X 45°
1"
5"
9"
10"
5" 1"
3 X 7 16"
72 8"
8" R3
8"
121094
SCALE 1:1
PE 32-12-6606PAGE 22 OF 48
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE DEBURRED TO 1.
ENSURE THEY ARE SAFE FOR HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM METAL SURFACES 2.
BEFORE WELDING. METAL SURFACES SHALL BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING TO AVOID NEEDLESS
DISTORTION, AND MINIMIZE SHRINKAGE, WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED. SIZE OF ALL 5.
APPLICABLE WELDS TO BE AT LEAST THE THICKNESS OF THE THINNER OF THE ADJOINING
PARTS. WELDS TO BE UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS NOT WELDED 6.
CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT, WHITE COLOR MANUFACTURED BY
SIKA CORPORATION.
1/29/2025
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
R
D
SHEET 1 OF 2
WEIGHT
118356
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, SIDE BOARDS, MID
31.55LBS
A
BILL OF MATERIALS
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
A
PRODUCTION.
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
BILL OF MATERIALS
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/29/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118359L
2 1 2" x 1" x 0.083" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A 513 118481
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118482
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118359R
2 1 2" x 1" x 0.083" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A 513 118481
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118482
1-3
FRONT VIEW
473 "4
4"
B
B
SCALE 1:5
ASSEMBLY, RIGHT SIDE BOARD, MID
FRONT, ISOMETRIC VIEW
1-3
118356R
118356R
ASSEMBLY, RIGHT SIDE BOARD, MID
REAR, ISOMETRIC VIEW
SCALE 1:5
1-3
SCALE 1 : 1
DETAIL B
2"
SCALE 1:5
ASSEMBLY, RIGHT SIDE BOARD, MID
FRONT, ISOMETRIC VIEW
1-3
118356L 118356L
ASSEMBLY, RIGHT SIDE BOARD, MID
REAR, ISOMETRIC VIEW
SCALE 1:5
FRONT VIEW
1-3
4"
4"
A
A
SCALE 1 : 1
DETAIL A
PE 32-12-6606PAGE 23 OF 48
48.926
31.217
118482
SCALE 2:1
8"
8"
R1 8"
UP
.0° R
9/
UP
.0° R
9/
118359L (SHOWN)
118359R (MIRRORED)
CT FLAT PATTERN
SCALE 1:4
1.268
3.034
SIDE VIEW
SECTION C-C
SCALE 1 : 3
2"
"13
2"
SCALE 1:4
118359L (SHOWN)
118359R (MIRRORED)
FRONT VIEW
C
C
SIDE VIEW
2"
1"
.083
FRONT VIEW
12"
118481
SCALE 1:2 161
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
WEIGHT
118356
9' LITTER PICKER BODY
SHEET 2 OF 2PRODUCTION.
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
A
INTERPRET GEOMETRIC
MATERIAL
ASSEMBLY, SIDE BOARDS, MID
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/29/2025
PE 32-12-6606PAGE 24 OF 48
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
RE
V
DEPARTMENT OF TRANSPORTATION
118317
9' LITTER PICKER BODY
THREE PLACE DECIMAL .005" ASSEMBLY, REAR DOOR
SHEET 1 OF 2
MATERIAL
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
BILL OF MATERIALS
ANSI Y14.5-2009
FINISH
.03" CONFIDENTIAL AND PROPRIETARY
PRODUCTION.88.63
INTERPRET GEOMETRIC
A
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
TOP VIEW
DETAIL A
1-3
SCALE 1 : 1
REF
TYP
4 PLCS
118317
ASSEMBLY, REAR DOOR
ISOMETRIC VIEW
SCALE 1:6
1-3
TYP
6 PLCS
SCALE 1:4
FRONT VIEW
ASSEMBLY, REAR DOOR
118317
1-3
"4471
"4
1 "
8"
48"
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/28/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 4 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118327
2 2 2 X 1 X 0.083 WALL RECTANGULAR TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 118333
3 3
2 X 1 X 0.083 WALL RECTANGULAR TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 118436
4 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118439
PE 32-12-6606PAGE 25 OF 48
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
PRODUCTION.
RE
V
WEIGHT
118317
9' LITTER PICKER BODY
SHEET 2 OF 2
BILL OF MATERIALS
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
.005"
A
INTERPRET GEOMETRIC
MATERIAL
ASSEMBLY, REAR DOOR
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
118333
SCALE 1:5
8"
1"
2"
.083
2"
1".083
118436
SCALE 1:5
2"
118439
SCALE 1:5
45"
4" R3
8"
118327
SCALE 1:5
"7
8"
R1
PE 32-12-6606PAGE 26 OF 48
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
9' LITTER PICKER BODY
118247
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
DEPARTMENT OF TRANSPORTATION
ANSI Y14.5-2009
BILL OF MATERIALS
RE
V
F
D
SHEET 1 OF 3
MATERIAL
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
A
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, COVER
DESIGNER
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENTDRAWN
FINISH
.03"
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
ISOMETRIC VIEW
SCALE 1:8
ASSEMBLY, COVER
118247
NOTE:
ALTERNATIVES TO ITEM 4 ARE ACCEPTABLE UPON REQUEST
65"
94"
8"
1"
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/22/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118249
2 2 3/16" THK PLATE, DRY, A36 STEEL HOT ROLLED,
PICKLED & OILED PER ASTM A36 118494
3 2 3/16" THK PLATE, DRY, A36 STEEL HOT ROLLED,
PICKLED & OILED PER ASTM A36 118495
4 4 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121082
4 CORNERS
TYP
TYP
TYP
4 CORNERS
DETAIL F
SCALE 1 : 2
1-4
8"
1"
SCALE 1 : 2
DETAIL G
TYP
TYP
4 PLCS
4 PLCS
REF
REF4
REF 4
PE 32-12-6606PAGE 27 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 2 OF 3
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, COVER
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
118247
WEIGHT
1/22/2025
9' LITTER PICKER BODY
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118249
1.1 1 1‐1/2" X 1" X 0.083", 90‐1/2" LONG, WALL RECTANGULAR TUBE,
MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
1.2 2 1‐1/2" X 1" X 0.083", 44‐3/4" LONG, WALL RECTANGULAR TUBE,
MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
1.2
1.2
1.1
CT# 118249
TUBE, WELDMENT
SCALE 1:4
2"
4"443
4"
PE 32-12-6606PAGE 28 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 3 OF 3
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, COVER
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118247
WEIGHT
1/22/2025
118494
SCALE 1:2
4"
4"
R1 4"
NOTE: DIMENSIONS NOT SPECIFIED TO BE DERIVED FROM CAD FILE
65"
94"
118495
SCALE 1:2
4"
4"R1
4"
UP 90.0° R 1/4"
118494
CT FLAT PATTERN
SCALE 1:2
65"
1.557 3.115
121082
SCALE 1:6
4"
4"
UP 90.0° R 1/4"
118495
CT FLAT PATTERN
SCALE 1:2
94"1.557
3.115
PE 32-12-6606PAGE 29 OF 48
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
118290
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
ASSEMBLY, FRONT DOOR
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
9' LITTER PICKER BODY
D
SHEET 1 OF 2
A
MATERIAL
ANSI Y14.5-2009
CONFIDENTIAL AND PROPRIETARY
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
TWO PLACE DECIMAL
INTERPRET GEOMETRIC
FINISH
DRAWN
PRODUCTION.
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/28/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 2" X 1" X .083" WALL SQUARE TUBE, STRUCTURAL STEEL,
ASTM A500, GRADE B 118302
2 2 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118327
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118479
4 2 BARREL BOLT, ZINC, 1/2" HEIGHT, 1-1/2" WIDTH, 4"
LONG 4PB98 .
5 2 BUTT HINGE, STEEL, FULL MORTISE, 1" LEAF WIDTH 4PA65 .
SECTION C-C
SCALE 1 : 3
FRONT VIEW
SCALE 1:3
4 3
3 "
4"
CC
SIDE VIEW
SCALE 1:3
SCALE 1 : 1
REF
DETAIL D
TYP
1"
ISOMETRIC VIEW
118290
TYP
TYP
TYP
ASSEMBLY, FRONT DOOR
DETAIL F
SCALE 1:4
SCALE 1 : 1
4"11
4"
TYP
DETAIL E
REF
SCALE 1 : 1
CL
TYP
CL
1-2
TYP
1-2
PE 32-12-6606PAGE 30 OF 48
118290
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
ASSEMBLY, FRONT DOOR
CONFIDENTIAL AND PROPRIETARY.03"
A
D
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENT
SHEET 2 OF 2
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
9' LITTER PICKER BODY
TWO PLACE DECIMAL
DRAWN
TOLERANCING PER:
MATERIAL
THREE PLACE DECIMAL
ANSI Y14.5-2009
BILL OF MATERIALS
PRODUCTION.
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
SIDE VIEW
SCALE 1:1
118302
FRONT VIEW
4"
SCALE 1:3
118479
FRONT VIEW
2"
1"
4"
R3 32"
SIDE VIEW
2"
1"5 64"
UP 90.0° R 3/32"
UP 90.0° R 3/32"
SCALE 1:3
118479
CT FLAT PATTERN
UP 90.0° R 3/32"
1.596
.70845.500
.748
13.901
118327
SCALE 2:1
"8
8"
R1
PE 32-12-6606PAGE 31 OF 48
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE DEBURRED TO ENSURE THEY ARE SAFE FOR 1.
HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO FACILITATE INSPECTION BY SHOP PERSONNEL.2.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM METAL SURFACES BEFORE WELDING. METAL 3.
SURFACES SHALL BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO 4.
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE 5.
OF WELDING TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING, AND TWISTING OF THE ASSEMBL
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST 6.
THE THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE UNIFORM AND NEAT IN APPEARANCE IN
ACCORDANCE WITH INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS NOT WELDED CONTINOUS. SEAL USING 7.
SIKAFLEX-521 UV RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
L
D
SHEET 1 OF 4
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
92.24
ASSEMBLY, SIDE BOARDS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118371
WEIGHT
1/30/2025
TYP
1 : 4
2 PLCS
SCALE
SECTION C-C
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/30/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118486
3 1 16 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118484L
4 1
2" X 1" X 0.083" WALL, 34-1/2" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
118400
5 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121077
6 6 10-32 x 3/4" WELD STUD 118266
SCALE 1 : 4
SECTION A-A
118371L
ASSEMBLY, SIDE BOARD, LEFT
FRONT VIEW
SCALE 1:4
1-2
TYP
OPP SIDE
2"
2"
8"
4"
2"
D
D
C
C
A
A
118371L
ASSEMBLY, SIDE BOARD, LEFT
ISOMETRIC VIEW
SCALE 1:7
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST
SCALE 1 : 2
DETAIL B
1-4
4"
2"
6 PLCS
SCALE 1 : 4
SECTION D-D
6X
TYP
4"1 2"
8" X 5
PE 32-12-6606PAGE 32 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
R
D
SHEET 2 OF 4
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, SIDE BOARDS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118371
WEIGHT
1/30/2025
118371R
ASSEMBLY, SIDE BOARD, RIGHT
ISOMETRIC VIEW
SCALE 1:7
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST
118371R
ASSEMBLY, SIDE BOARD, RIGHT
FRONT VIEW
SCALE 1:4
1-2
TYP
OPP SIDE
2"
2"
2"
8"
EE
H
H
F
F
1-4SCALE 1 : 2
DETAIL G
4"
2"
TYP
1 : 4
2 PLCS
SCALE
SECTION E-E
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2 1
2" X 1" X 0.083" WALL, 34-1/2" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
118400
3 1 16 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118484R
4 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118486
5 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121077
SCALE 1 : 4
SECTION F-F
4"
SCALE 1 : 4
SECTION H-H
PE 32-12-6606PAGE 33 OF 48
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 3 OF 4
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, SIDE BOARDS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118371
WEIGHT
1/30/2025
118400
SCALE 1:2
FRONT VIEW
2"
121077
SCALE 1:4
36"
8"
118401
SCALE 1:5
TYP
OPP SIDE 45°
TYP
OPP SIDE
45°
TYP
OPP SIDE
4"
16"
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2" X 2" X 0.083" WALL, 53-3/4" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
2" X 2" X 0.083" WALL, 69-1/16" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
NOTE:
DIMENSIONS NOT SPEDIFIED TO BE DERIVED FROM CAD FILE.
SIDE VIEW
1"
2"
.083
PE 32-12-6606PAGE 34 OF 48
118371
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
A
ANSI Y14.5-2009
BILL OF MATERIALS
RE
V
F
D
SHEET 4 OF 4
MATERIAL
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
A
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, SIDE BOARDS
DESIGNER
INTERPRET GEOMETRIC
L
DIVISION OF EQUIPMENTDRAWN
FINISH
.03"
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/30/2025
SCALE 1:3
118484L (SHOWN)
118484R (MIRRORED)
FRONT VIEW
65"
EE
SECTION E-E
SCALE 1 : 3
DOWN 90.0° R 11/64"
SCALE 1:3
DOWN 90.0° R 11/64"
118484L (SHOWN)
118484R (MIRRORED)
CT FLAT PATTERN
DOWN 90.0° R 11/64"
.762
65.028
2.497
1.173
15.130
2"
3 "11 4
R11 64"
TYP
TOP VIEW
SIDE VIEW
NOTE:
DIMENSIONS NOT SPEDIFIED TO BE DERIVED FROM CAD FILE.
PE 32-12-6606PAGE 35 OF 48
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
16"
4"
8"13
8"
2"
118336
WEIGHT
9' LITTER PICKER BODY
D
C
B
AA
B
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .