PD - Water Jet_Final.docx

PRODUCT DESCRIPTION

Project Name: Water Jet Project Manager: Daniel Morgan Phone: 435-833-3676 Email: Daniel.j.morgan72.civ@army.mil

Item Name: OMAX 80X/30V OR 80X-1/30 Abrasivejet

Quantity: 1 Complete unit with options

Specifications:

OMAX 80X AbrasiveJet with 30 HP EnduroMax Pump. This proposal includes rigging and factory startup/training once the machine is connected to utilities.

Collision Sensing Terrain Follower (CSTF) – Basic EnduroMAX Pump Spares Kit (PN 308457); Includes minor rebuild kit Laminar Filter - Settling tank efficiently cleans overflow water from the Catcher Tank Chiller, 60,000 BTU (440-480V) Touch Screen Monitor Kit (PN: 308030-3) - Adds Touchscreen to the Y-bridge for remote access to computer controls Air and Water Conditioning Kit (PN 303923) Nozzle Spares Kit, MAXJET®5i Moto Z, TAJ and A-Jet Rigging IUID tag plate per MIL-STD-130x

Please Note: This machine requires 440-480VAC 3-Phase power for operation.

Packaging Requirement:

Package Freight

Shipping Information:

Tooele Army Depot 1Tooele Army Depot, Building 503 Tooele, Utah 84074

Comments and Information:

OMAX 80X AbrasiveJet - Table w/EnduroMAX P3060V Pump to Include the following:

1. EnduroMax 3060V Variable Frequency Drive, Direct Drive Pump A. Continuous 0.67 GPM @ 60,000 PSI Operation. B. Operating efficiencies up to 85%. C. Capable of over 1000 hours between maintenance. D. Meets & exceeds the federally mandated green energy requirement.

2. Programmable Motorized Z-Axis with MAXJET 5i Nozzle .012"

3. Rapid Water Level Control for quiet and clean submerged cutting

4. 600 lb capacity bulk abrasive delivery hopper.

5. Low maintenance, high reliability scissor-style hard plumbing.

6. Pallet containing 2200 lbs. of garnet abrasive - supplied in 50 lb. bags.

7. Includes FREE UNLIMITED seats of software and FREE software UPGRADES for LIFE of the machine.

8. Machine is fully assembled at the factory and tested prior to shipping.

9. A Factory Technician will arrive on site to assemble the components of the water jet.

10. The Factory Tech will start the machine to assure it's operation.

11. Immediately following start-up, the technician will provide 3 Days Onsite Training.

12. 1 Year Warranty Extension (2 Years Total)

13. Five (5) Day Training in Kent, Washington (airfare, room and board, not included) FREE for life.

14. One (1) Day Follow Up Training (Pump rebuild and applications).

15. Machine Hardware & Software designed and manufactured in Washington, USA

TF (CSTF)

Collision Sensing Terrain Follower (CSTF) - Allows operator to set the machine standoff once at the start of cutting and then the CSTF constantly and continuously compensates for material height changes to maintain precise standoff. In addition to maintaining precise standoff, the CSTF also detects potential collisions and pauses the machine to avoid hardware damage. The simple and compact design requires no additional programming and is compatible with the Motorized Z-Axis or Tilt-A-Jet cutting heads.

BasicEMPSK Basic EnduroMAX Pump Spares Kit (PN 308457); Includes minor rebuild kit (1,000 hours) and replacement pump filters, lubricants and a compartmentalized box for storage.

OMAX LAMINAR

Laminar Filter - Settling tank efficiently cleans overflow water from the Catcher Tank for required recycling through a Closed Loop System or for sanitary disposal down the drain. For use on OMAX and Maxiem machines.

Chiller Chiller, 60,000 BTU (440-480V)

VSRS-80X

Variable Speed Solids Removal System: The programmable Solids Removal System provides precise control over abrasive evacuation rate, direction, and duration to efficiently remove garnet from the abrasive waterjet catcher tank. This system gives the operator the ability to program flow rate and direction. The controller’s programmability provides greater garnet removal than comparable fixed speed units. An optimized fluid return trough increases settling time and minimizes abrasive volume returning to the tank. 80X machines only.

Touch Touch Screen Monitor Kit (PN: 308030-3) - Adds Touchscreen to the Y-bridge for remote access to computer controls

AWCK

Air and Water Conditioning Kit (PN 303923)

SNK

Nozzle Spares Kit, MAXJET®5i Moto Z, TAJ and A-Jet

Rigging to Include:

1. Mobilize crew and equipment to Tooele Army Depot.

2. Unload, unpack and place dunnage in government provided dumpsters.

3. Place machine, pump, chiller and ancillary equipment in facility. Does not include utilities.