PD.pdf
PDF 417 KB Posted
- Attached to
- High Speed Precision Gap Bed Lathe
- Solicitation number
- W912DW26Q1BUF
About this file
This is a Purchase Description for a High Speed Precision Gap Bed Lathe required by the U.S. Army Corps of Engineers for delivery to Chief Joseph Dam in Bridgeport, Washington.
The procurement requires one new American-made 17-inch high speed precision gap bed lathe with specific technical requirements including a 1-piece casting, hardened and ground bed ways (minimum HR-70), Tri-V ways design, Turcite-B carriage ways, 57-60 inch distance between centers, 3.125 inch minimum spindle bore diameter, 7.5 inch bed gap, 5 inch tailstock quill travel, full-length foot brake, easily removable lead screw and feed rod cover, capability to cut inch and metric threads without manual gear changes, backlash eliminator on cross-slide, and 480V 3-phase electrical configuration. Ten additional accessories are required: steady rest, follow rest, four chucks of varying sizes and jaw configurations (8", 10", and 12"), 14-inch face plate, 2-axis digital read-out system, 7-10 inch telescopic taper attachment, and quick change tool holder set. The contractor must submit descriptive materials including catalog cut sheets and specification sheets, provide two complete operation and maintenance manuals with installation, operation, maintenance, repair, and troubleshooting instructions plus component diagrams and spare parts lists, and include contractor, manufacturer, and distributor contact information on manual covers. Delivery must be FOB Destination to the specified address within 120 days of contract award during Chief Joseph Dam business hours (Monday-Thursday, 7:00 am-4:00 pm, excluding Federal holidays), with partial delivery not acceptable. Materials will be inspected at delivery prior to acceptance, and only new equipment is permitted.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description Chief Joseph Dam (CJD) High Speed Precision Gap Bed Lathe Bridgeport, WA.
GENERAL INFORMATION:
The U.S. Army Corps of Engineers requires one (1) High Speed Precision Gap Bed Lathe to be delivered to Chief Joseph Dam in Bridgeport, Washington.
SPECIFICATIONS:
The High-Speed Precision Gap Bed Lathe shall meet or exceed these requirements as specified and must have the following minimum salient characteristics:
General:
Origin: Must be American made
Casting: Must be a 1-piece casting
Bed Ways: Must be hardened and ground to a minimum of HR-70
Design: Must have Tri-V ways
Carriage Ways: Must have Turcite-B anti-friction material
Capacity:
Swing Over Bed: Must be at least 17 inches.
Distance Between Centers: Must be between 57 and 60 inches.
Spindle Bore Diameter: Must be at least 3.125 inches.
Bed Gap: Must have a gap in the bed of at least 7.5 inches in front of the chuck.
Tailstock Quill Travel: Must have at least 5 inches of travel.
Features & Safety:
Brake: Must have a full-length foot brake.
Guarding: Must have an easily removable lead screw and feed rod cover.
Threading: Must be able to cut both inch and metric threads without manual gear changes in the gearbox.
Cross-Slide: Must have a backlash eliminator on the cross-slide lead screw.
Electrical: Must be configured for 480V, 3-phase power.
Additional Accessories:
Item 1: Steady Rest, 9" Capacity w/Rollers for 17" Lathe
Item 2: Follow Rest with Bronze Tips for 17" Lathe
Item 3: 8" 3-Jaw Chuck, D1-6 Direct Mount, Steel Body
Item 4: 12" 3-Jaw Chuck, D1-6 Direct Mount, Steel Body
Item 5: 10" 4-Jaw Chuck, D1-6 Direct Mount, Steel Body
Item 6: 12" 4-Jaw Chuck, D1-6 Direct Mount, Steel Body
Item 7: Face Plate, 14" for D1-6 Spindle Nose
Item 8: 2-Axis Digital Read-Out (DRO) System
Item 9: Telescopic Taper Attachment 7”-10”
Item 10: Quick Change Tool Holder Set
SUBMITTALS:
Descriptive Materials (brochures, illustrations, drawings, data sheets, etc.) must be submitted, which will allow the Contracting Officer to determine, without discussion with the offeror, whether the products being offered meet all of the required specifications. Submittals shall include copies of catalog cut sheets and specification sheets.
OPERATION AND MAINTENANCE MANUALS:
Two complete copies of the Operation and Maintenance Manual will be required for the lathe. The manuals shall include instructions on the installation, operation, maintenance, repair, troubleshooting, and warranty.
They shall also include diagrams listing all system components, part numbers, and a list of recommended spare parts.
Also included shall be the name, phone and fax numbers, and email address of the contractor, manufacturer, and a distributor where spare parts can be purchased.
The following identification shall be inscribed on the covers:
OPERATING AND MAINTENANCE INSTRUCTIONS
Contract Name: Chief Joseph Dam
Name of the Contractor
Contract Number
ACCEPTANCE OF MATERIALS:
Materials will be inspected at the delivery point prior to acceptance. The contractor shall be responsible for maintaining the product’s condition as specified until the point of acceptance. New equipment only; no remanufactured or “gray market” items.
DELIVERY SCHEDULE:
The successful offeror shall be required to deliver the lathe to Chief Joseph Dam within 120 days of contract award; partial delivery is not acceptable. All deliveries must take place during CJD business hours of Monday through Thursday 7:00 am – 4:00 pm, excluding Federal holidays.
DELIVERY LOCATION:
Item shall be delivered FOB DESTINATION to the following address:
US Army Corps of Engineers ATTN: Mikal Miller Chief Joseph Dam Pearl Hill Rd HWY 17 Bridgeport, WA. 98813
File details come from the government source that posted it. Updated .