Parts and Description.xlsx
XLSX spreadsheet 11 KB Posted
- Attached to
- Quintus Fluid Cell Press Bladder
- Solicitation number
- FDB76013
About this file
This document is a Pre-Solicitation for an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to supply and service the Quintus Fluid Cell Press Bladder (Diaphragm) for the 402d Maintenance Support Group (MXSG) at Robins Air Force Base, Georgia. The contract will have a 60-month continuous ordering period, and payment will be made via both certified Purchase Requests and the Government Purchase Card. The government is conducting a market survey to identify potential sources capable of providing the applicable materials, labor, tray pads, shipping, and other itemized parts listed in the attached "Parts and Description" spreadsheet. This requirement is being issued by the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOURCES SOUGHT.docx | DOCX document | |
| Purchase Description.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Part Number | Description |
| 6162 | Spring 2, 5X16X88 |
| 248055 | Filter Element |
| 370460 | Parallel pin CP 6x24 |
| 391854 | Retaining Ring |
| 420496 | Pump Repair Kit |
| 1253074 | Filter Element Note: Replaces P/N 0240D010ON |
| 1263730 | Oil Filter Element |
| 13024061055 | Tapered clamping sleeve |
| 2151 243-125 | Cage |
| 2152 0160-15 | PU-filling |
| 2152 0160-74 | Rubber filling right |
| 2152 2011-305 | O-ring: 7.3X2.4 |
| 2152 2012-416 | O-Ring |
| 2152 5074-E | Rubber filling |
| 2152 5076-E | PU-corner left |
| 2152 5076-F | PU-corner right |
| 2167 5040-b | KEY |
| 2184 5178-B | Ball joint |
| 2186 5021-4 | Back-up ring |
| 2186 673-76 | Support ring for sealing |
| 2199 029-K | Spring device |
| 2199 029-M | Spring device |
| 3BPR001583K100 | Shoulder Bolt |
| 46 1723001 | O-Ring, 42.2X3.0 |
| 46 5120001 | O-Ring 130X14 |
| 6211-2RS1 | Ball Bearing |
| 6735 0075-57 | Fixing Bar |
| 6735 0077-104 | Upper Seal |
| 6735 0077-123 | Seal left |
| 6735 0078-116 | Compensating bar, left |
| 6735 0078-117 | Compensating bar, right |
| 6735 0078-118 | Corner, left |
| 6735 0078-119 | Corner, right |
| 6735 0186-67 | Sealing block left |
| 6735 0186-68 | Sealing block right |
| 6735 0281-AF | Diaphragm |
| 6735 0336-18 | Sealing Profile |
| 6735 0348-12 | Tray Pad |
| 6896 085-12 | Mounting Sleeve |
| 6896 085-13 | Mounting Cone |
| GMMF000112T53 | Bronze Teflon W=300MM |
| Hazmat Charge | Hazardous Goods |
| K1S 35 26 5 PUR-H | Rod Seal |
| NY11714006 | Gleitmo 900 Aerosol |
| PSK 100250-T46N | Stepseal |
| RCJY55 | Flange Bearing |
| SC2000 | Contact Glue, Quart |
| SE009556 | Support ring for sealing |
| SE033108 | Gleitmo 700 |
| SE033115 | LM51 COMP 1 & 2 |
| SE082540 | Tray Pad |
| SE085167 | Chain Wheel |
| SE085169 | Shaft |
| SE086500 | Side Rail Support |
| UTR20 | Hardener, 40 Gram |
File details come from the government source that posted it. Updated .