BACKHOELOADER_SPECS_WORD.docx

Backhoe/Loader with the following specifications:

1. Four Wheel Drive capability

2. Minimum Net Power of 108 hp

3. Maximum operating weight of 24,500 lbs.

4. Easy Ride Control function

5. Extendible dipper stick with a minimum extended reach of 19'

6. Must come with a loader multi-purpose coupler interface clam shell type bucket with a minimum capacity of 1.3 yards

7. Hydraulic pump capacity minimum of 43 gallons per minute

8. Hydraulic system pressure minimum of 3600 psi

9. Top speed minimum of 25 mph

10. Auto shift transmission

11. Adjustable air suspension heated seat

12. Storage compartment for tools

13. Two rear facing joystick controls, separate from the seat, with John Deere/Excavator in cab control pattern selector with thumb roller for 3rd function auxiliary operations.

14. Battery remote jumpstart

15. Fully enclosed climate controlled operator cab

16. Signal lights, headlights, boom lights, flashing hazard lights, rotating beacon light, stop and tail lights, and rear view mirrors.

17. Reversible Stabilizer pads with street shoes

18. Power receptacle, 12V, 2 internal, 1 external

19. Starting system glow plugs

20. Backhoe bucket is a heavy duty 24" bucket

21. Bluetooth hands free radio with speakers

22. Backhoe Hydraulic Dual Lock Pin Grabber Coupler Quick Connect Controlled from Cab for work tool attachments.

23. Cab operated hydraulic backhoe thumb with a minimum 105 degree rotation angle.

24. Loader must have self-leveling, return-to-dig and transmission disconnect switch

25. Engine block heater

One each of the Following Attachments

1. Hydraulic Side-shift Concrete/Asphalt Cold Planer with a minimum of 18inch width and 48 bits

2. A 10 ft. Snow Plow with Left and right Capabilities with coupler interface maximum weight of 875 lbs.

3. A 12ft. Straight Snow Pusher with top snow guard and coupler interface maximum weight 950 lbs.

4. 23" minimum Vibratory Plate Compactor With built in flexible isolators.

5. Hydraulic Hammer with Auto Shut Off minimum 1610 lb. operating weight.

An example of the desired type of machine that is required is the Caterpillar 430F21T