FY26_MAK_3ea_Electric_Forklifts_ADD_Salient_Characteristics.docx

Salient characteristics Electric Forklift, Bundle Procurement for TLSC-E/A, Maintenance Activity Kaiserslautern (MAK)

Salient characteristics - Electric Forklift, Bundle Procurement

TABLE OF CONTENTS

1. Overview This requirement consists of

CLIN 0001: Electric Forklift (3-Wheel) with Fork Positioner (1ea)

TECHNICAL REQUIREMENTS

Description of equipment Basic:

· 3-wheel electric counterbalance truck with Overhead guard. Load capacity of 1,8 at load center of gravity of 500 mm.

Mast:

· Triplex clear-view mast with full free lift

· Lift speed limited for safe working

· 3/5 degrees forward/back tilt

· Fork Carriage, 6 rollers, 980 mm wide, ISO 2A

· Fork arms, 1.200x100x40 mm ISO 2A

Tilt assistant:

· Dual auxiliary hydraulics for the control of attachments with two functions

· Display of the tilt angle and damped entry into tilt end positions

Auxiliary Equipment:

· Fork positioner, fork carriage 1000 mm sideshift +/- approx 0-155 mm opening range approx. 190-810 mm

Driver's Cab:

· Overhead Guard: Weather protection with tinted front and roof screen, screen washer/wiper system.

(logic-controlled).

· Hydraulic Controls: Mini-lever with armrest, 4-way, four single levers for selection of the hydraulic functions, including drive direction pre-selection and horn. With armrest

guidance for intuitive communication with the truck. (with hand-lever hydraulics: adjustable position angle)

brake is not engaged.

Specification:

· Lighting System: LED version with drive direction indicators and hazard warning lights. Front: 2 LED headlights. Rear: LED tail and brake lights.

right. Additional 2 working spotlights in LED-version, on overhead guard, top, right and left

operation at the steering column.

left and right beside the truck, warning passers-by. The height of the overhead guard increases by max. 150 mm depending on configuration. Warning zone light behind the vehicle.

Semicircular vehicle outline

vehicle.

Tyres:

· Front axle: Superelastic, SIT system, 180/70-8 basic truck width 1028 mm

· Rear axle: Single Superelastic, SIT system, 180/60-10

Battery

Charger

· Charger Description:

· Pulse characteristics

· Traffic-light style charge level indication

· Data storage of the last 200 charge cycles

· Standard USB connection

· Protection class IP 21

CLIN 0002: Electric Forklift (4-Wheel) with Fork Positioner (1ea)

TECHNICAL REQUIREMENTS

Description of equipment Basic:

· 3-wheel electric counterbalance truck with Overhead guard. Load capacity of 1,8 at load center of gravity of 500 mm.

Mast:

· Triplex clear-view mast with full free lift

· Lift speed limited for safe working

· Capacity at max li

· 7/4 degrees forward/back tilt

· Fork Carriage, 4 rollers, 980 mm wide, ISO 2A, 2.0t

· Fork arms, 1.200x100x40 mm ISO 2A

· 3 fixed lift programs Lift speed cut-out on the press of a button for safe working e.g. at large heights or with sensitive loads

Tilt assistant:

· Dual auxiliary hydraulics for the control of attachments with two functions

· Display of the tilt angle and damped entry into tilt end positions

Auxiliary Equipment:

· Fork positioner, fork carriage 1000 mm sideshift +/- approx 0-155 mm opening range approx. 190-810 mm

Driver's Cab:

· Overhead Guard: Driver's cab tinted windscreen and rear window, wiper/washer system front and rear, heated rear window. Roof screen according to specification. Fixed side panel right, with large sliding window Steel door left (530 lock), with double sliding window that opens wide, entry grip front left, handle rear right

for windscreen.

(logic-controlled).

· Hydraulic Controls: Mini-lever with armrest, 4-way, four single levers for selection of the hydraulic functions, including drive direction pre-selection and horn. With armrest

guidance for intuitive communication with the truck. (with hand-lever hydraulics: adjustable position angle)

brake is not engaged.

Specification:

· Lighting System: LED version with drive direction indicators and hazard warning lights. Front: 2 LED headlights. Rear: LED tail and brake lights.

right. Additional 2 working spotlights in LED-version, on overhead guard, top, right and left

left and right beside the truck, warning passers-by. The height of the overhead guard increases by max. 150 mm depending on configuration. Warning zone light behind the vehicle.

Semicircular vehicle outline

vehicle.

Tyres:

· Front axle: Superelastic, 200/50-10

· Rear axle: Superelastic, 150/75-8

Battery

Charger

· Charger Description:

· Pulse characteristics

· Traffic-light style charge level indication

· Data storage of the last 200 charge cycles

· Standard USB connection

· Protection class IP 21

CLIN 0003: Electric Forklift (4-Wheel) with Tire Clamp Attachment (1ea)

TECHNICAL REQUIREMENTS

Description of equipment Basic:

· 4-wheel electric counterbalance truck with Overhead guard. Load capacity of approx. 2.0t at load center of gravity of 500 mm Mast:

· Triplex clear-view mast with full free lift

· 3 fixed lift programs Lift speed cut-out on the press of a button for safe working e.g. at large heights or with sensitive loads

· 7/4 degrees forward/back tilt

· Fork Carriage, 4 rollers, 980 mm wide, ISO 2A, 2.0t

· Fork arms, Load pick-up is handled by the attachment.

Tilt assistant:

· Dual auxiliary hydraulics for the control of attachments, including electric actuation for a solenoid valve (12V/2A) on the attachment.

· Display of the tilt angle and damped entry into tilt end positions

Auxiliary Equipment:

· Special Attachment: Clamp fork with clip-on tire clamps

· Description:

· Side shift: +/- 100 mm

· Opening range (center-to-center forks): 300 - 1950 mm

· Fork cross-section: 120 x 45 mm

· Fork length: 1200 mm

· with holes for 2T106AH-2 at 800 mm center of gravity

· Number of hydraulic functions: 2 + solenoid valve

· Application: Suitable for tire diameters from 1100 - 1500 mm and tire widths from 350 - 400 mm (max. weight 500 kg).

Clip-on tire clamps

· 1 pair of tire clamps

· Arms suitable for

· Tire diameters from 1100 - 1500 mm

· Tire widths 350 - 400 mm

· Max. weight 500 kg Driver's Cab:

· Overhead Guard: Driver's cab tinted windscreen and rear window, wiper/washer system front and rear, heated rear window. Roof screen according to specification. Fixed side panel right, with large sliding window Steel door left (530 lock), with double sliding window that opens wide, entry grip front left, handle rear right

(logic-controlled).

· Hydraulic Controls: Mini-lever with armrest, 4-way, four single levers for selection of the hydraulic functions, including drive direction pre-selection and horn. With armrest

guidance for intuitive communication with the truck. (with hand-lever hydraulics: adjustable position angle)

brake is not engaged.

Specification:

· Lighting System: LED version with drive direction indicators and hazard warning lights. Front: 2 LED headlights. Rear: LED tail and brake lights.

right. Additional 2 working spotlights in LED-version, on overhead guard, top, right and left

operation at the steering column.

left and right beside the truck, warning passers-by. The height of the overhead guard increases by max. 150 mm depending on configuration. Warning zone light behind the vehicle.

Semicircular vehicle outline

vehicle.

Tyres:

· Front axle: Superelastic, 200/50-10

· Rear axle: Superelastic, 150/75-8

Battery

Charger

· Charger Description:

· Pulse characteristics

· Traffic-light style charge level indication

· Data storage of the last 200 charge cycles

· Standard USB connection

· Protection class IP 21

Accessories: Critical requirement!

Provision of required diagnostics software (German version) to include one (1ea) set of data cables for all models shall be included in the final price.

2. COMMON REQUIREMENTS FOR ALL EQUIPMENT

· A 12-month / 1800 working hours warranty must be included. Also, any maintenance required to obtain the warranty, must be included in the offer.

· Equipment must be brand new

· Machine must have CE Conformity Declaration.

· All Documentation in English and German language for each requested device. The operating instructions should be accessible in digital form in the required language via the QR code or similar on the vehicle type plate

For technical evaluation, Contractors shall use the Salient characteristics layout provided with the technical requirements to annotate whether each item noted is fully met or note how it differs from the data noted. Offers submitted without this technical data will be considered non-responsive.

3. TRANSPORT AND TRAINING REQUIREMENTS

· Packing and Transport costs included

· Transport insurance included

· On-site Training in German Language included

· Stamped and signed Training Certificate required

· Unloading of Equipment included – ready to use

4. DELIVERY ADDRESS

Kaiserslautern Army Depot TLSC-E&A / Maintenance Activity Kaiserslautern Ludwigshafener Strasse 31, Bldg 2233 67657 Kaiserslautern

5. TECHNICAL POC

Markus Feth E-Mail: markus.feth.ln@army.mil

CIV: (0611) 143 547-0011

Page | 2