Bending machine specifications.pdf

Product Description

1 ea. Motorized swing bending machine

• Powerful and quiet drive via gear motors with brake

• Compact, heavy and stress-free welded steel construction

• Sharp bending rail made of tool steel C50 at the clamping cheek

• Continuous, exchangeable bed support made of tool steel C50

• Continuous bending rail made of tool steel C50 at the bending beam

• Automatic pressure regulation of the clamping cheek via motor current pick-up

• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles

• Bending angle adjustment PT 1 via potentiometer on the machine front (right)

• Manual fine adjustment of bending beam with scale

• Manual crowning via pressure screws in the bending beam

• Foot remote control with emergency stop function

• All moving parts with low-maintenance bearings

Technical Specifications

• Max. working width 2020 mm

• Max. passageway between top + bottom beam 200 mm

• Motor power of bending beam 4,0kW / 400V

• Motor power of clamping beam 1,1kW / 400V

• Working width 2020mm

• Bending capacity S235JR (400N/mm²) 4,0mm

• Bending capacity X5CrNi18-10 (600N/mm²)* 2,5mm

• Bending capacity AlSi4,5 (275N/mm²) 5,0mm

• Maximum bending angle 135°

• Max. clearance between table and clamping beam 200mm

• Table height approx. 850mm

• Dimensions approx. 3020mm x 1100mm x 1560mm

• Weight approx. 3.900kg

Bending capacity

• 400N/mm² 4.0 mm

• Stainless steel 3 mm

• Hardening tool for for bending stainless steel must be inlcuded

Including:

• Segmented goat foot tool height 120 mm including adapter rail

• Additional bending bar 10mm width

• Back gauge 10-760mm, measuring device + stop finger, width 2000mm

Control PT 1 / bending angle adjustment via potentiometer, adjustment of the bending angle via potentiometer

Controls:

Approx. 7´´colour touch screen operation mainly via icon menu entering position of the back gauge, folding angle and correction, position of the clamping beam profile programming with memory for min. 49 profiles, each with min. 20 folds cooperation with servo-drives in all axes work with profiles as well as individual steps in the profile (deleting, inserting steps) backup profiles to USB stick.

Key switch for work mode

• Opening after bending

• Automatic

• Semi-automatic after pressing the pedal

Documentation:

• Manual in German language

• CE certification

Delivery:

• USAG Ansbach Barton Barracks (location may change due to upcoming move but it will be within USAG Ansbach AOR)

• Delivery must be coordinated thru appointment.

• Machine needs to be unloaded and ready to use installed by contractor.

• Contractor is required to provide qualified instructions on the machine after delivery.

Training has to be coordinated prior with the receiver.

• Training must be in German language.