Product Description.pdf

2 EA Truck dump with attachment, As described below inclusive delivery.

The vehicle to be furnished under this contract shall be brand-new, from the manufacturer’s most current production and shall be meet the applicable German StVO, DIN, UVV and CE regulations.

General description:

4-whell drive three-way tipper with 2 axles and loading crane; equipped with communal hydraulics for winter maintenance; GVWR for special operations min.

15500 kg, color: orange municipal RAL 2011

The equipment shall meet the following minimal technical requirements:

ENGINE

Power at least 235 kW (320 hp) Fuel filter heating Euro 6 emission standard Exhaust pipe to the right Raised air intake with dry filter

GEARBOX

Standard manual shifting with clutch Speed limiter at least 89 km/h Cruise Control

AXLES

Front axle, 6.3 t; with differential lock; Stabilizer for front axle Rear axle, 9,5 t; with differential lock; Stabilizer for rear axle; air suspension system Front axle as Outer planetary axis, permanent drive able

WHEELS

Front: at least 385/55R22,5 ULTRAGRIP MAX S Lenk-Winter TL Back: at least 275/70R22,5 SP372 CITY M+ Spare wheel: at least 275/70R22,5 SP372 CITY M+

STEERING SYSTEM

Hydraulic steering Steering wheel with height and inclination adjustment Multi-function steering wheel Steering left

FRAME

Wheelbase 3650 mm + / - 10% Rear frame overhang 1525 mm + / - 10% Rear underride guard Front underride guard Steel bumper Radiator guard Trailer hitch Ringfeder Type RF40/G145A

BRAKING SYSTEM

Electronic brake system Anti-lock braking system (ABS) 2-line brake connection at end of frame Air filler connection at front Air dryer Disc brake for front and rear axle Anti-slip regulation (ASR)

FUEL TANK

Steel fuel tank capacity at least 150 l lockable Ad Blue tank at least 10 l lockable.

POWER TAKE-OFF

Axial flow pump Operation for dumping body in the cab

ELECTRICAL SYSTEM

At least 2 ea. 12V 175 Ah batteries Maintenance free Alternator min. 28V 190A 5320 W

BODY

Tipper body 4000x2380 mm +/- 10%

Nominal load 10 t Techn. permissible gross vehicle weight 15 - 16 t Tipper body length 3,200 - 4,800 mm Tipper body width max 2,380 mm Side wall height approx. 500 mm Floor material 4.0 mm HBW 450 Front wall material 2.5 mm HBW 450 Side wall and tailgate material 2.5 mm HBW 450

Subframe and tipper body need to be cavity-sealed

Hydraulic system and add-on parts with treated part surface

Lashing eyelets

Sturdy side wall lashing eyelets with a retention force of up to 2 t per lashing point Folding lashing eyelets that are flush with the floor with a retention force of up to 8 t per lashing point

Side wall relief spring: Easy opening and closing of the side wall

Steel quality minimum:

HBW 500 steel for the floor Minimum 5 mm thick HBW 350 for the side walls Headboard and tailgate, minimum 2.5 mm thick Lashing points on load deck;

Headboard 900 mm, spring assisted hinging swinging Side-walls 700 mm Tail board 700 mm.

Oscillating tail gate can also be partially folded down and automatic operated claw closure.

Ladder stored under tipper body Warning stripes red / white retro-reflective at the rear corners Reflective outline markings for tipper body Rear hydraulic connection for 3-way tipping trailer

OPERATING WEIGHTS

Total at least 15500 kg Perm. Train weight at least 23900 kg

CAB

Compact cab CC Width and length max. 2.240 x 1.620 Construction steps on left mudguards, Handle on outside of the cab roof Left Windscreen of laminated glass tinted heatable Door and rear windows tinted Spray reducer Air suspension mounted cab Sun shade in front of windscreen Sun shade for front window Handles in the cab Curb mirror right heat able and electrically adjustable Wide-angle mirror right and left heat able and electrically adjustable Rear view mirror heat able and electrically adjustable EU front mirror on co-driver's side Compressed air connection in the cab High-comfort driver's seat with air suspension, lumbar support, shoulder adjustment, armrest and heating.

Co-drivers' bench for 2 persons (single seats) Air conditioning system with automatic temperature control without CFHC.

Fine dust and pollen filter.

Storage compartment above windscreen.

Display on the dashboard for operating data.

Radio with bluetooth hand free function.

Acoustic beeper for engaged reverse gear.

Halogen twin headlights H7 Head- and fog lights Additionally Guards for headlights Work lights on cab roof rear Remote control to lock and unlocks doors.

Two revolving beacons, yellow.

Universal holder for control panel.

Warning marking red / white on doors and wind deflector.

Within the driver-side door there are minimum four controls that can be easily accessed from outside the vehicle, to avoid getting in and out when it’s not necessary. They come pre-programmed with the key functions or can even be implemented according to individual needs.

CRANE

PK 12002-EH

Loading crane High Performance series

BASIC UNIT:

Lifting torque: 107.9kNm (11.0mt) Classification HC1 HD4/B3 according to EN12999 Fast-moving extension system with return oil recycling and internal oil feedthrough Double toggle lever. This system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With a 15 degree reverse linkage system for reaching out Swivel mechanism with swivel cylinders Swivel range 400° Electronic HPLS control unit (for two pressure ranges) Individual support control with unlockable check valves on the support cylinders Load holding valves on swivel, lifting, articulating and extension cylinders Hydraulic support leg boom Hydraulically extendable with individual support control Double hydraulic boom lock without additional mechanical lock Support legs rigid Support leg extension 200mm Transport position monitoring support Monitoring of the hydraulic support leg booms in the retracted state Wired to the crane's control box with output for visual or acoustic signals HPSC-L - Stability System HPSC-L Extended Stability System:

Support leg boom fully extended and supported Support leg boom not fully extended and supported Work area for unsupported operation Distinction between left and right side of vehicle Calculation of the permissible work area for each Swing angle of the arm system Electronic overload protection including emergency / OFF and utilization indicator on all operating stations.

Hour meter with service interval display - mounted Radio remote control.

Cross lever control Display of utilization and overload on the Remote Controller At least 5 selectable speeds Automatic frequency scanning at startup Additional functions for crane functions pre-wired (OLP HPLS, horn) Switching crane / arm on the remote controller) 3 free functions (engine start / stop, speed + / -)

Accessories:

Connection cable for cable Remote control 2 batteries Charger Pelvis and neck strap HPLS electronic control unit (for pressure ranges 2) Hydraulic oil cooler power min 8.5 kw Load holding valves on lifting Folding and swing cylinder, and the push cylinder Maintenance-free extension system 1 load slings on the last extension Toggle on the jib Swivel range 400 degrees Altitude warning device with two laterally extendable Hydraulic outriggers Outrigger 3.10m

Interlock:

Double locking the manual outrigger with a handle and integrated monitoring of the lock Transport position monitoring of the outrigger Individual supports control with pilot operated check valves on the outriggers, 10 ° swiveling support plate Stability control to increase operational safety for stability at 360 ° predefined support positions:

Outriggers retracted / extended and fully support cylinder on the ground, not supported Including the following optional features:

Hydraulic extension: Reach - 7.70 m / lifting capacity 1120 kg;

Hose equipment for 2 additional devices Including radio-controlled valve unit and couplings Telescopic hydraulic extendable side support Support width 4.90 m;

Support leg extension by 200 mm Fulcrums 180 ° hydraulically tiltable up Crane accessories consisting of 5.4 t crane hook and mounting hardware

Bucket:

Heavy duty with rotator Width at least 50 cm Opening at least 140 cm with 4 teeth Mechanical clamping system for loading crane on truck Stable holders and referring for easy exchange process Tipper body remains at the truck logbook

Technical Specifications:

Max. lifting moment at least 8.7 mt / 85.3 kNm Max. lifting capacity at least 5500 kg / 55.9 kN Max. hydraulic outreach at least 14.0 m Max. manual outreach at least 16.0 m Slewing angle at least 400° Slewing torque 1.0 mt / 9.8 kNm Stabilizer spread std. 3.2 m / maximal 5,6 m Width folded at least 2.32 m

Dead weight max. 1047 kg

ADDITIONAL EQUIPMENT

Front mounting plate, shape A, size 5 (DIN 76060) Winter-hydraulic 2-celled with screw couplings, inclusive joystick and integrated controller in the dashboard Mud flap front Plastic mudguards (full) rear Navigation First-aid kit Hazard-warning lamp, portable Warning triangle Tire filling hose 20 m, with manometer Air hose and air gun Jack 10 t 2 ea chocks centrifugal snow chains Rot grip The followings listed technical manuals for truck and attachments must be provided:

Operators manual 2 EA German Maintenance manual 2 EA German Parts list 2 EA German

WARRANTY AND SERVICE

2 year warranty limited warranty First service including material on site Second service including material on site

ASSEMBLING AND DELIVERY

Truck has to be configured so that existing snow plow (Bucher Ramox L30) and spreader work on the vehicle. Any modifications should be included in the price.

Attachment devices can be viewed on site. An instruction and demonstration has to be provided for operator and maintenance personnel within four (4) days after delivery from a qualified person of the manufacturer in timing with the responsible division. Time of instruction and demonstration ca. 8 hours in German language.

Delivery by appointment only. Must be notified and agreed to at least one week prior.

Documents Registration documents for Germany Declaration of conformity or data confirmation and registration certificate part II (vehicle letter) Spare parts list Manual