MONGOOSE_Tech_Sheet.pdf

Precision Direction Finding & Exploitation RECEIVE: 10MHz – 6GHz DIRECTION FINDING: 50MHz – 512MHz

WAVEFORMS

single-channel analog (VHF and UHF) Digital Mobile Radio (DMR) Next Generation Digital Narrowband (NXDN) frequency hopping signals

MONGOOSE DIGITAL DIRECTION FINDING

HARDWARE

Processor Intel Core i7-6600U Processor (Dual core, 4M Caache, 3.4 GHz); 32GB (2x16GB)

2133MHz DDR4 Memory

Data Storage 1TB Solid State Drive

Communication 10/100/1000 gigabit Ethernet and triple RF‐passthough (GPS, mobile broadband and WLAN)

Display 14.0” HD (1366x768) Outdoor-Readable Resistive Touchscreen

RECEIVER DATA

Frequency Range 30 MHz – 6 GHz

Scan Speed Instantaneous 5 MHz bandwidth search/scan

Demodulation Mototrbo • NEXEDGE • DMR • AM • FM • CW • LSB • USB

Operating Modes – Four-channel coherent receiver

– Two wide-bandwidth RF daughterboards

– Signals of Interest/Target List storage for quick scanning and quick tune

– Lockout (LO) List

RF DIRECTION FINDING

Frequency Range 30 – 512 MHz

Signals Frequency Hopping, DMR, NEXEDGE, AM, FM

Accuracy Better than 2° RMS achievable

DF COVERAGE

360° Azimuth

INTERFACES

DC IN DC Power Supply, 4-contact MIL-circular connector

LAN 802.3 (10/100Mb)

Wireless LAN 802.11 b/g (AES 256 bit encryption)

PHYSICAL

Weight Host Controller: 1.7 kg (3.7 lbs.) Backpack configuration: 53 Total System (in transit): 93

Battery BB-2590/U Lithium-IonBattery

Battery Life ~ 4 hours

Power Source

Options

100V to 240V AC, 50 Hz to 60 Hz, 9V to 16V DC

Temperature Storage: 0°C to +40°C Operating: 0°C to +40°C

SIZE

Dimensions Host Component Assembly 27.7 x 21.8 x 3.9 cm (11.00 x 8.58 x 1.53 in.)

SOFTWARE

Features – Mission Management software (post mission analysis & processing capability)

– Web-based software interface for system control, post mission processing & analysis

– Intuitive GUI

– Toggle DF / Monitor Modes and Audio Recording

– Audio Streaming

– Overlays Line of Bearing (LOB) data onto map or imagery

MONGOOSE TECHNICAL SPECIFICATIONS

System Component Weights (lbs) receiver 11.2 antenna mast 1.8 direction-finding head 2.4 laptop 6.2 tablet 4.0 router with antennas 2.0 backpack 9.4 batteries (3) 9.4 cabling 3.6 AC adapters (3) 3.2 transit case 39.8 system in transit case 93.0

MONGOOSE TARGETING CAPABILITY

RECEIVE RANGE: 10MHz – 6GHz DIRECTION FINDING RANGE of standard X-Array: 50MHz – 512MHz

WAVEFORMS

single-channel analog (VHF and UHF) Digital Mobile Radio (DMR) Next Generation Digital Narrowband (NXDN) frequency hopping signals: narrow band, >500 hops-per-second, >5 MHz of bandwidth

Digital Mobile Radio (DMR). DMR is a digital mobile radio standard used in commercial products around the world. DMR uses two-slot TDMA in a 12.5 kHz channel.

The most common DMR products are:

□ HQT DMR Series: DH-9800 (portable), DM-9800 (mobile), DR-9200 (repeater)

□ Samhoo DMR Series: ST3, SC3, SPH6040(UHF 400 - 470 MHz),SPH6035(UHF 350 - 400 MHz),SPH6015(VHF), SPM6040(UHF 400 - 470 MHz),SPM6035(UHF 350 - 400 MHz),SPM6015(VHF)

□ Aselsan: DMR4700 Series

□ EXCERA: EP8100,EM8100

□ Harris Momentum

□ Hytera DMR series: PD35X, PD36X, PD50X, PD56X, PD60X, MD65X, PD66X, PD68X, RD62X, X1p, X1e, PD70X, PD78X, MD78X, PD79X, PD79X Ex, RD96X, RD98X, DS-6210, DS-

6211, DS-6310

□ Kenwood (JVCKENWOOD) DMR Series: TK-D200, TK-D300, TK-D240, TK-D340, TK-

D740, TK-D840, TKR-D710, TKR-D810

□ Motorola MOTOTRBO: XPR8300, XPR8400, MTR3000, SLR5000 series, SLR8000 series, CP200d, XPR6300, XPR6550, XPR6580, XPR7350, XPR7380, XPR7550, XPR7580, SL7550, SL7580, SL300, XPR3000e series, XPR 7000e series, SL7000e series, XPR4000 series, CM200d, CM300d, XPR2500, XPR5000 series, XPR5000e series

□ EMC-TB: LANDER DMR, DATALANDER DMR, ROMULUS DMR

□ Tytera: MD-280, MD-380, MD-390, MD-9600

□ Vertex: EVX series, EVX-530 Series, EVX-5300/5400, EVX-R70

Next Generation Digital Narrowband (NXDN). A common air interface protocol developed jointly by ICOM and Kenwood. NXDN uses Frequency Division Multiple Access (FDMA), employing a 4-level FSK modulation scheme. Kenwood's brand for NXDN equipment is "NEXEDGE", while Icom's brand for NXDN equipment is "IDAS", or Icom Digital Advanced System.