Packaging - Special packing instructions - AK13553113.pdf
PDF 208 KB Posted
- Attached to
- Cylinder, Actuating
- Solicitation number
- SPRDL124Q0110
About this file
This document is a Special Packaging Instruction (SPI) for a Cylinder Assembly with National Stock Number 3040-01-355-3113. The SPI provides detailed specifications for the preservation, cleaning, drying, packing, marking, and blocking/bracing of the cylinder assembly. Key requirements include applying preservative to unpainted metallic surfaces, sealing all openings, placing barrier material between cylinder components, and constructing the shipping container from 1-inch nominal lumber with skids. The cylinder assembly is procured under Solicitation Number SPRDL124Q0110 issued by the Defense Logistics Agency Land and Maritime for a Cylinder, Actuating. The solicitation was released on an unspecified date, and no other details about the procurement are provided in this document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL1-24-Q-0110-0001.pdf | ||
| Solicitation_SPRDL124Q0110 posted on SAM.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
0BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-PL
DS
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
6-372-004546 (12361) CYLINDER ASSEMBLY 19207 AK13553113
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-355-3113 04 JAN 2023 A
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 106.0 2.215 43.4 X 8.4 X 10.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-16173, GR 4
MIL-STD-2073-1
14. DRYING 2-C A/R PRESERVATIVE: MIL-PRF-10924
MIL-STD-2073-1
15. PACKING 3-D A/R CAPS/PLUGS: NAS847
a. LEVEL A 4-E A/R BARRIER: MIL-PRF-121, TY II
MIL-STD-2073-1 & NOTE H
b. LEVEL B 5-F 2 BLOCKING/BRACING: SEE NOTE
NOT APPLICABLE
16. MARKING 6-G 1 CONTAINER: ASTM-D6880, CL 2, ST 4 (MODIFIED),
MIL-STD-129 SIZE: 40-3/8 X 6-7/8 X 6-1/2
17. NOTES/ DRAWING
A. PRESERVATION AND PACKAGING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1 AND ANY
APPLICABLE CONTAINER SPECIFICATIONS.
B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
C. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.
D. SEAL ALL OPENINGS TO INTERIOR OF THE CYLINDER ASSEMBLY WITH CAPS/PLAGS OF THE APPROPRIATE SIZE.
E. PLACE BARRIER BETWEEN ALL SECTIONS OF THE CYLINDER ASSEMBLY THAT COME IN DIRECT CONTACT WITH THE
INTERIOR OF THE CONTAINER OR THE BLOCKING/BRACING.
F. SEE PAGE 2 FOR BLOCKING/BRACING FABRICATION.
G. THE CONTAINER IS CONSTRUCTED OF ALL 1 INCH THICK NOMINAL LUMBER AND MODIFIED TO INCLUDE SKIDS. SIZE AND APPLICATION OF SKIDS ARE IN ACCORDANCE WITH ASTM-D6880 CONTAINER SPECIFICATION.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
6-372-004546 (12361) CYLINDER ASSEMBLY 19207 AK13553113
4. NATIONAL STOCK NO.
3040-01-355-3113
5. DATE
04 JAN 2023
6. REVISION
A
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
17. NOTES/ DRAWING
NOTE:
ALL SIZES ARE ACTUAL. OUTER DIMENSIONS ARE FOR REFERENCE ONLY.
BLOCKING AND BRACING MEMBERS SHALL CONFIRM TO ASTM- D6199 AND
SHALL BE SECURED TO THE INTERIOR OF THE CONTAINER WITH
NAILS/STAPLES CONFORMING TO ASTM-F1667.
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .