Packaging Requirements.pdf
PDF 68 KB Posted
- Attached to
- Control Box, Electrical
- Solicitation number
- SPRTA1-26-Q-0400
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is a Packaging Requirements specification for a federal contract identified as Purchase Instrument Number FD20302601342-00, Version 1. The specification applies to item 1660011965999 and establishes mandatory packaging and marking standards in compliance with MIL-STD-129 (Revision R) and MIL-STD-2073-1 (Revision E).
The primary requirement addresses wood packaging material (WPM) compliance with United Nations-implemented restrictions on invasive species, specifically the pinewood nematode. All wooden lumber, pallets, and containers must be constructed from debarked wood and heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for a minimum of 30 minutes. Certification and marking by an accredited agency recognized by the American Lumber Standards Committee (ALSC) is mandatory, with reference to International Standards for Phytosanitary Measures (ISPM No. 15). The packaging requirement is classified as "AAA MIL Long Line Packaging" at Preservation Level MIL and Packaging Level B. Unit pack specifications include a weight of 2.20 units, dimensions of 9.3 x 6.3 x 4.0 inches, and a cube measurement of 0.135. All items must be packaged per MIL-STD-2073-1 with shipping container marking per MIL-STD-129, including potential additional requirements for unit serial numbers, original equipment manufacturer (OEM) names, or OEM model numbers as specified on the AFMC Form 158. The packaging specialist is Aaron D. Mallory at the 406 SCMS/GULAA organization, with the specification signed and dated 09 March 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRTA1-26-Q-0400.pdf | ||
| EO_2011C0938-T.pdf | ||
| Transportation Data.pdf | ||
| IUID.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20302601342-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA MIL Long Line Packaging MIL B
ITEM(S):
1660011965999
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 AAA GX 1 00 K3 NB A NS EC B ZZ 2.20 9.3 6.3 4.0 0.135 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
ZZ - SMC: 39 AND 17.
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Mallory, Aaron D
PHONE NUMBER:
405-582-9768 / 852-9768
SIGNATURE:
//SIGNED//Mallory, Aaron D
DATE:
26068 - 09 MAR 2026
Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 08 Apr 2026
File details come from the government source that posted it. Updated .