P25-046 Emerging Tech DED Automated Toolpath Generation - Item Description_Redacted.pdf
PDF 200 KB Posted
- Attached to
- Emerging Tech DED Automated Toolpath Generation
- Solicitation number
- FA813225Q0025
About this file
This memorandum from the Department of the Air Force Sustainment Center details a request for the purchase of an OpenDED Software License for the 76th PMXG/MXDE Squadron. The comprehensive procurement includes one OpenDED Software License with multiple modules such as OpenSCAN, rotational slice, setup and automatic process flow, line scanning, kinematics, postprocessor, and data set management. Additionally, the request covers a virtual touch probing and alignment software module, extensive commissioning and training services including one week of on-site start-up, one week of specialist training, and two 5-day advanced onsite training blocks at approximately 3 and 6 months after installation. The option year includes one year of software maintenance and updates, featuring software and feature updates, remote and onsite software support, and three remote support days. The document specifies that installation, commissioning, and training may only be carried out by authorized personnel.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| P25-046 Emerging Tech DED Toolpath Generation-JA rev_Redacted JB.pdf | ||
| CSS (FA813225Q0025).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
6 May 2025
MEMORANDUM FOR RECORD
SUBJECT: Item Description, P25-046 Emerging Tech DED Automated Toolpath Generation
1. The 76th PMXG / MXDE Squadron is requesting utilization of funds for the purchase of OpenDED License, Trainings, and Maintenance.
2. The requested equipment item descriptions/specifications are outlined below.
a. One (1) OpenDED Software License to include:
(1) OpenSCAN and rotational slice module
(2) Setup and automatic process flow
(3) Line Scanning
(4) Kinematics module for target machine
(5) Postprocessor for target controller
(6) Data set management
(7) Documentation in English – pdf file
b. One (1) Software module- Virtual touch probing and alignment
c. Commissioning, acceptance and training
(1) One (1) week on-site start-up and test runs
(2) One (1) week specialist training
d. One (1) 5-day block Advanced onsite training
• Approx. 3 months after installation
e. One (1) 5-day block Advanced onsite training
• Approx. 6 months after installation
Option Year(s)
f. One (1) year Software maintenance and updates to include:
(1) Software and feature updates
(2) One (1) 3-day block Remote Software Update support
(3) One (1) 5-day block Onsite Software support
(4) Three (3) Remote Support days (minimum increment of ½ days)
3. Installation, commissioning and training may only be carried out by personnel or by persons authorized in writing by .
File details come from the government source that posted it. Updated .