OTHER THAN FULL OPEN COMPETITION UNDER SAT FORM_Nitze STBD Shaft Face Change Out_21_1022.pdf

PDF 3 MB Posted

Attached to
USS NITZE SHAFT SHEAL CHANGE OUT KIT
Solicitation number
N5005422Q0003
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MEMORANDUM TO THE FILE

(This is only applicable to acquisitions under the Simplified Acquisition Threshold. Acquisition using FAR Subpart 13.5 shall follow the special documentation requirements at FAR 13.501.)

Subj: USE OF OTHER THAN FULL AND OPEN COMPETITION FOR AN

ACQUISITION UNDER THE SIMPLIFIED ACQUISITION THRESHOLD

I. BACKGROUND:

1. FAR 13.106-1(b)(1)(i) states for purchases not exceeding the simplified acquisition threshold, Contracting Officers may solicit from one source if the Contracting Officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand-name or industrial mobilization).

2. As required by FAR 13.106-3(b)(3)(i), this memorandum explains the absence of competition for this acquisition, as only one source will be solicited for this requirement (or for a portion of the requirement) and the requirement is not expected to exceed the simplified acquisition threshold.

II. DESCRIPTION OF ITEM OR SERVICE:

III. THE DETERMINATION FOR USE OF OTHER THAN FULL AND OPEN

COMPETITION IS BASED ON THE FOLLOWING (select all that apply):

A. ONLY ONE RESPONSIBLE SOURCE (select all that apply):

1. RESTRICTIVE RIGHTS. The source has established proprietary rights, limited rights in data, patent rights, copyrights or secret processes in the item or service required.

2. EXCLUSIVE LICENSING AGREEMENTS. The item or service is only available from the Original Equipment Manufacturer (OEM), or there is only one authorized distributor or technical representative for the OEM.

3. OTHER REASONS.

B. BRAND NAME. Item required must be a brand name product, or feature of a product, particular to one manufacturer.

C. UNUSUAL AND COMPELLING URGENCY. The supplies or services are of such unusual and compelling urgency that the Government would be seriously injured unless the agency is permitted to limit the number of sources from which it solicits bids or proposals.

Urgent requirements are supplies or services that will result in a work stoppage, or are mission critical and the routine processing time would result in injury to the Government. The determination that the procurement for the above item/service is an urgent and compelling requirement is based on the following:

1. Date on which the requirement was first identified:

2. Required delivery date/period of performance:

3. Explanation of why delivery/commencement of services by the date mentioned above is required:

4. If appropriate, include any additional pertinent information.

IV. CERTIFICATIONS/APPROVALS:

A. Technical / Requirements Certification: I certify that the facts and representation under my cognizance which are included in this justification are complete and accurate to the best of my knowledge and belief.

Signature Title

B. Contracting Officer’s Certification: I certify that the facts and representation under my cognizance which are included in this justification are complete and accurate to the best of my knowledge and belief.

Signature Title

MEMORANDUM TO THE FILE

Text1: DDG-51 FACE CHANGE OUT KIT MX9 US72113 & TECHNCIAL SERVICES FROM WARSILA DEFENSE INC, TO REPAIR STBD SHAFT SEALS. PERIOD OF PERFORMANCE IS 11/08/2021 THRU 12/31/2021.
Text2:
Check Box3: Yes
Check Box4: Off
Check Box5: Yes
Check Box6: Off
Check Box7: Off
Text8: WARSILA DEFENSE INC IS THE OEM FOR THE SHAFT SEAL. ALL PARTS ARE OEM SPECIFIC. THE DRAWING AND CASTINS FOR THE MX-9 SHAFT SEAL ARE PROPRIATERY TO ///////////AND SPECIFIC DIMENSIONS TO MANUFACTURE PARTS ARE NOT SHOWN ON DRAWINGS AND WILL NOT BE PROVIDED BY THE OEM.
Text9: THE PARTS WILL INTERFACE AND CONNECT TO INSTALLED EQUIPMENT AS PER SPECIFICATIONS OF THE SHIP'S DRAWINGS. IF THE PARTS DO NOT FIT PERFECTLY, THERE IS A RISK OF SERIOUS INJURY OR DEATH AND SEVERE DAMAGE TO SHIP'S SYSTEMS FROM FLOODING. CURRENTLY STBD SHAFT SEAL EXCEEDS THE MAXIMUM RATE OF ALLOWABLE LEAKAGE PER NSTM 244
Text10:
Text11:
Text12:
Text13:
Text14:
2021-10-22T12:55:33-0400
CORDERO.HENRY.JAVIER.1030558070
Text16: Engineering Technician
2021-10-27T10:46:35-0400
LOWRY.SAMUEL.LORAINE.1060283482

Text18: Contracting Officer

File details come from the government source that posted it. Updated .