ORDERING DATA 41586036.pdf

Document#:41586036 QTY:10 Ul: AY QA Code: 4

NSN: 4720-LL-L24-0004

ITEM NAME: 2.5” X 25’ HOSE ASSEMBLY, SALTWATER AND FRESHWATER, OILY WASTE

• 2.38" I.D. X 2.88" O.D.

ORDERING DATA:

• SHALL HAVE A MINIMUM WORKING PRESSURE OF 300 PSI AND A MAXIMUM

WORKING PRESSURE OF 400 PSI

• SHALL HAVE A BURST PRESSURE OF 1400 PSI

• MUST HAVE A MINIMUM BEND RADIUS OF 24"

• 1.40-1.50 LBS. PER FOOT WITHOUT END FITTINGS

• SHALL HAVE A TEMPERATURE RATING OF-40 DEGREES (F) TO 212 DEGREES

(F)

• MUST BE RESISTANT TO WEATHER, OIL, SOLVENTS, AND MILD ACIDS

• HOSES ARE TO BE PROVIDED IN 25 FOOT LENGTHS (+12" / -12") WITH PLASTIC

CLEANLINESS CAPS ON EACH END

• SHALL HAVE A SYNTHETIC RUBBER INNER TUBE WITH A TEXTILE INNER

BRAID

• SHALL HAVE A SINGLE WIRE BRAID FOR REINFORCEMENT

• SHALL HAVE AN OUTER TEXTILE BRAID WITH A SYNTHETIC RUBBER COVER.

• EACH HOSE ASSY SHALL HAVE THE FOLLOWING FIELD ATTACHABLE FITTINGS

ON EACH END: 2-1/2" MALE PIPE (NPT 8 THREADS PER INCH).

FITTINGS SHALL BE RED BRASS ALLOY C84400, C90500, OR C92200 EQUAL OR

EQUIVALENT TO AEROQUIP PART NUMBER 44-412-40-408.

NOTE: FITTINGS AND HOSES MUST BE FROM THE SAME MANUFACTURE

• EACH HOSE ASSY SHALL HAVE THE FOLLOWING ADAPTERS ON EACH END,

CONNECTED TO THE HOSE FITTINGS: 2-1/2" MALE HOSE (NST/NH

7-1/2 THREADS PER INCH) ON ONE END AND 2-1/2" FEMALE HOSE SWIVEL (BALL

BEARING) (NST/NH 7-1/2 THREADS PER INCH) ON THE OTHER END. FITTINGS

MUST BE RED BRASS ALLOY C84400, C90500 OR C92200.

ALL THREADED JOINTS SHALL BE ASSEMBLED USING LOCTITE 562 SERIES

SEALANT. TEFLON TAPE OR "PLUMBERS PUTTY"IS NOT AUTHORIZED AND

SHALL NOT BE USED.

• EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM THE

MANUFACTURER’S NAME, CONTRACT NUMBER AND PRESSURE RATING

ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING.

• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE

ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROST ATI CALLY TESTED

AT 285 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES WITH ZERO

LEAKS AND/OR BULGES.

• A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND

A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH CONTRACT.

• HOSE SHALL BE EATON AEROQUIP 2651 OR EQUIVALENT.

• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES

THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND

EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION

PROCESS.

• HOSE MUST BE PALLETIZED

• CODE 269 SHALL REVIEW OFFEROR'S SPECIFICATIONS PRIOR TO AWARD.

• Shelf-Life -UU

SOURCE OF SUPPLY

Hampton Rubber B&B Hose and Rubber Hot and Cold Plumbing Supplies

DESCRIPTION LAST UPDATED BY: RONNIE NEAL, CODE 269 DATE: 2/5/2024

DESCRIPTION LAST REVIEWD BY: W. McPherson DATE: 6/10/2024