ORDERING DATA 41416045.docx
DOCX document 24 KB Posted
- Attached to
- DISCHARGE HOSE ASSEMBLY Federal contract opportunity
- Solicitation number
- SPMYM124Q0134
About this file
This document contains the ordering data for a 4" x 50' discharge hose assembly, which is the subject of a federal contract opportunity with the Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY).
The DLA intends to award a Firm Fixed Price (FFP) single award contract as a Lowest Price Technically Acceptable (LPTA) procurement for 10 units of the discharge hose assembly. The hose must meet specific requirements including a working pressure of 350-450 PSI, 16,000 PSI burst pressure, weight, temperature rating, and material composition. Each assembly must include male and female camlock fittings that are permanently attached. The supplier must provide a written certification of hydrostatic testing. The hose must be palletized, and NNSY reserves the right to request a sample for testing. The solicitation is expected to be issued on or about July 19, 2024, with proposals due by July 25, 2024. This will be a small business set-aside procurement under NAICS code 326220.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Document #:41436045 QTY: 10 UI: AY QA Code: 3
NSN: 4720-LL-L24-0012
ITEM NAME: 4” X 50’ DISCHARGE HOSE ASSEMBLY, SALTWATER, FRESHWATER
ORDERING DATA:
· 4” I.D. X 4.83” O.D.
· HOSE SHALL HAVE A WORKING PRESSURE OF 350 PSI MINIMUM AND 450 PSI MAXIMUM
· HOSE SHALL HAVE A MINIMUM 16,000 PSI BURST PRESSURE
· 2.70 - 2.80 LBS MAXIMUM WEIGHT PER FOOT WITHOUT COUPLING
· SHALL HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO 200 DEGREES (F)
· SHALL BE WEATHER, OIL, SOLVENT, AND MILD ACID RESISTANT
· SHALL HAVE NITRILE BLEND RUBBER WITH UHMPE WRAPPED FINSISH COVER.
· SHALL HAVE A NITRILE RUBBER INNER TUBE.
· SHALL HAVE HIGH TENSILE DUAL STATIC WIRE PLIES (MINIMUM OF FOUR (4) FOR REINFORCEMENT.
· TO BE SUPPLIED IN 50 FOOT LENGTHS (+12” / -12”)
· EACH HOSE ASSEMBLY SHALL HAVE THE FOLLOWING ADAPTERS ON EACH END, CONNECTED TO THE HOSE FITTINGS: 4” MALE HEAVY DUTY CAMLOCK X HOSE SHANK (PT COUPLING P/N: 1200540H W/ 40EHD BRASS BODY) ON ONE END AND 4” FEMALE HEAVY DUTY CAMLOCK X HOSE SHANK (PT COUPLING P/N: 1200340H W/ 40CHD BRASS BODY) ON THE OTHER END.
NOTE: EACH COUPLING SHALL BE PERMANTLY/MECHANICALLY ATTACHED BY INTERNALLY EXPANDED, UTILIZING A STAINLESS STEEL FERRULE IN ACCORDANCE WITH THE COUPLING MANUFACTURE RECOMMENDATION.
· EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING.
· SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
· A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH CONTRACT.
· HOSE SHALL BE PARKER 7311NXT-4000 OR NOVAFLEX OILFIELD FRACKING HOSE P/N: 3274BT(U)-04000-00 OR EQUIVALENT.
· AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS.
· HOSE MUST BE PALLETIZED
· CODE 269 SHALL REVIEW OFFEROR’S SPECIFICATIONS PRIOR TO AWARD.
Shelf-Life - UU
SOURCE OF SUPPLY
Hampton Rubber B&B Hose and Rubber Hot and Cold Plumbing Supplies
| DESCRIPTION LAST UPDATE BY: Ronnie Neal; Code 269 | DATE: 2/6/2024 | |
| DESCRIPTION LAST REVIEWED: W. McPherson | DATE: 5/29/2024 |
File details come from the government source that posted it. Updated .