ORCC Procurement Item Descriptions.TXT

*** Product Number: 010629200 ** PID Text

COVER, O-RING, PROTECTIVE

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 5185689

REVISION NR DTD 07/28/1977

PART PIECE NUMBER:

*** Product Number: 000014811 ** PID Text

O-RING

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART

STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.

HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD

DEFINING THIS ITEM IS ACCEPTABLE.

HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,

REVISION OF THE STANDARD IS ACCEPTABLE.

ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,

SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE

PART STANDARD IN QUESTION.

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

52.211-2 FOR ORDERING SUCH DATA.

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

IAW BASIC NON GOVT STD SAE AS3582 (R2018)

REVISION NR DTD 09/01/1996

PART PIECE NUMBER: AS3582-210

IAW REFERENCE NON GOVT STD SAE AMS3304J

REVISION NR J DTD 04/01/2019

PART PIECE NUMBER: AS3582-210

*** Product Number: 000016681 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

SYNTHETIC RUBBER

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

PRI-SAE QPL APPLIES.

THE PRI-SAE QPL CAN BE OBTAINED THROUGH THE

PRI-SAE WEB SITE: WWW.PRI.SAE.ORG

CLICK ON THE QUALIFIED PRODUCT LIST LINK TO

LOCATE THE APPLICABLE QPL.

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL

APPROVED AT THE TIME OF THE CONTRACT AWARD.

CONTRACTOR SHALL PROVIDE CERTIFICATION/DOCUMEN-

TATION TO THE QUALITY ASSURANCE REPRESENTATIVE

THAT MATERIAL COMPLIES WITH THE MATERIAL SPECI-

FICATION IDENTIFIED IN THE CONTRACT/PURCHASE

ORDER.

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS7259F

REVISION NR F DTD 09/01/2024

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD SAE AS3581A

REVISION NR A DTD 05/01/2020

PART PIECE NUMBER:

*** Product Number: 000030697 ** PID Text

PACKING PREFORMED /O RING/

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

PARKER-HANNIFIN CORP 02697 P/N 2-111E540-80

ASHCROFT INC 38056 P/N 00572-111

*** Product Number: 000036690 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL

APPROVED AT THE TIME OF THE CONTRACT AWARD.

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AS28775 (R2013)

REVISION NR A DTD 12/01/2008

PART PIECE NUMBER: MS28775-137

*** Product Number: 000036805 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING "OPEN SOLICITATION ONLY".

TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

FULL AND OPEN COMPETITION APPLY

IAW BASIC DRAWING NR 77445 629305

REVISION NR B DTD 03/13/1972

PART PIECE NUMBER:

*** Product Number: 000043227 ** PID Text

O-RING

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

FULL AND OPEN COMPETITION APPLY

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART

STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.

HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD

DEFINING THIS ITEM IS ACCEPTABLE.

HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,

REVISION OF THE STANDARD IS ACCEPTABLE.

ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

52.211-2 FOR ORDERING SUCH DATA.

IAW BASIC SPEC NR MIL-DTL-22050F NOT 1

REVISION NR F DTD 06/05/2024

PART PIECE NUMBER: M22050-1-115

*** Product Number: 000043445 ** PID Text

O-RING

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

SOURCE CONTROL

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF

THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING

OFFERORS NOT CITED AS APPROVED SOURCES IN THE

PURCHASE ORDER TEXT ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF

THE SOURCE APPROVAL REQUEST, TECHNICAL DATA

PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST

ALSO BE SUBMITTED TO DLA WITH THE OFFER.

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

WOODWARD HRT, INC (81873)

P/N 82005513-005 RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

PARKER-HANNIFIN CORP 02697 P/N 82005513-005

WOODWARD HRT INC 81873 P/N 82005513-005

PARKER-HANNIFIN CORPORATION 83259 P/N 82005513-005

IAW BASIC DRAWING NR 81873 82005000

REVISION NR AW DTD 05/30/1995

PART PIECE NUMBER:

*** Product Number: 000045061 ** PID Text

O RING

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED

BY THE PERFORMANCE REVIEW INSTITUTE,

161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA

15086-7527. TO VIEW CONTRACTORS CURRENTLY

APPROVED BY (PRI) GO TO http://www.p-r-i.org

THE MANUFACTURER FOR THE QPL ITEM MUST BE

APPROVED FOR THE QPL ITEM AT THE TIME OF

THE CONTRACT AWARD.

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

IAW BASIC NON GOVT STD SAE AMS7276J

REVISION NR J DTD 05/01/2020

PART PIECE NUMBER: AMS 7276G

*** Product Number: 000045338 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

IDENTIFY TO:

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

PARKER-HANNIFIN CORP 02697 P/N 2-217N674-70

*** Product Number: 000050483 ** PID Text

O-RING:

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING "OPEN SOLICITATION ONLY".

TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AS3209

REVISION NR C DTD 08/01/2021

PART PIECE NUMBER: AS3209-010

IAW REFERENCE NON GOVT STD SAE AMS7276

REVISION NR J DTD 05/01/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-22104

REVISION NR DTD 04/08/2022

PART PIECE NUMBER:

*** Product Number: 000050562 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED

BY THE PERFORMANCE REVIEW INSTITUTE,

161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA

15086-7527. TO VIEW CONTRACTORS CURRENTLY

APPROVED BY (PRI) GO TO http://www.p-r-i.org

THE MANUFACTURER FOR THE QPL ITEM MUST BE

APPROVED FOR THE QPL ITEM AT THE TIME OF

THE CONTRACT AWARD.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

IAW BASIC NON GOVT STD SAE AS568

REVISION NR F DTD 09/01/2020

PART PIECE NUMBER: AS568-901

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-413C NOT 2

REVISION NR C DTD 03/17/2011

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD SAE AMS-P-5510

REVISION NR B DTD 04/01/2023

PART PIECE NUMBER: MS28778-1

IAW REFERENCE NON GOVT STD SAE AS28778 (R 2021)

REVISION NR C DTD 10/01/2016

PART PIECE NUMBER: MS28778-1

*** Product Number: 000064820 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

PERMITTED IN THIS ITEM

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

IAW BASIC NON GOVT STD SAE AS568

REVISION NR F DTD 09/01/2020

PART PIECE NUMBER: P/N AS568-030

IAW REFERENCE NON GOVT STD SAE AMS3215N

REVISION NR N DTD 11/01/2019

PART PIECE NUMBER:

*** Product Number: 000068297 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

PERMITTED IN THIS ITEM

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

EMERSON AUTOMATION SOLUTIONS FINAL 15187 P/N 06689237142

*** Product Number: 000085324 ** PID Text

PACKING, PREFORMED

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

PARKER-HANNIFIN CORP 02697 P/N 3-902N552-90

*** Product Number: 000087877 ** PID Text export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

HONEYWELL INTERNATIONAL INC. 99193 P/N S9413-014

*** Product Number: 000137785 ** PID Text

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART

STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.

HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD

DEFINING THIS ITEM IS ACCEPTABLE.

HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,

REVISION OF THE STANDARD IS ACCEPTABLE.

ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

IAW BASIC NON GOVT STD SAE AS568

REVISION NR F DTD 09/01/2020

PART PIECE NUMBER: AS568-266

IAW REFERENCE STD NR MIL-STD-129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ASTM D2000-18

REVISION NR DTD 06/01/2018

PART PIECE NUMBER:

*** Product Number: 000200105 ** PID Text

O-RING

THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY

ITEM (CSI).

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER

FOR REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE)<(>,<)>

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

RD002, COVERED DEFENSE INFORMATION APPLIES

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in

THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART

STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.

HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD

DEFINING THIS ITEM IS ACCEPTABLE.

HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,

REVISION OF THE STANDARD IS ACCEPTABLE.

ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT

SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED

MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED

MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS

LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS

LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT

WWW.EAUDITNET.COM .

FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS

(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN

EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE

PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE

BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.

THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN

MILITARY SALES (FMS) AND STOCK SHIPMENTS.

"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.

LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS

ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE

ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE

WITH CLAUSE L30 AND PROVISION 4 - CONDITIONS

FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR

PART NUMBERED ITEMS."

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS7276

REVISION NR J DTD 05/01/2020

PART PIECE NUMBER: M83248/1-908

*** Product Number: 000263123 ** PID Text

PACKING, PREFORMED

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

FRAM CORP INDUSTRIAL DIV 87405

TULSA OK

PN 606521

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

FACET (OKLAHOMA) LLC 87405 P/N 606521

*** Product Number: 000382669 ** PID Text

O-RING

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.

LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS

ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE

ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE

WITH CLAUSE L30 AND PROVISION 4 - CONDITIONS

FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR

PART NUMBERED ITEMS."

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in

EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE

PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE

BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers

RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION

(AUG 2016)

This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

(End of TQ Requirement)

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI).

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 73030 69494

REVISION NR BA DTD 12/22/2011

PART PIECE NUMBER: 69494J906

*** Product Number: 000384327 ** PID Text

O-RING

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

PERMITTED IN THIS ITEM

RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

CATERPILLAR INC 11083 P/N 4F-9653

*** Product Number: 000454559 ** PID Text

O-RING

SYNTHETIC RUBBER

THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT

SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED

MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED

MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS

LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS

LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT

WWW.EAUDITNET.COM .

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART

STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.

HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD

DEFINING THIS ITEM IS ACCEPTABLE.

HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,

REVISION OF THE STANDARD IS ACCEPTABLE.

ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,

RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AS3551

REVISION NR A DTD 10/01/2020

PART PIECE NUMBER: AS3551-233

IAW REFERENCE NON GOVT STD SAE AMS7272G

REVISION NR G DTD 04/01/2013

PART PIECE NUMBER:

*** Product Number: 000457901 ** PID Text export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved…