Oil Analyzer Salient Characteristics.docx

Portable oil condition/analysis and viscosity combination testing kit Salient Characteristics

· Viscosity testing must meet the minimum criteria below:

· Accuracy +/-3% Relative Standard Deviation to NIST viscosity standards

· Solvent free operation: No solvent needed to perform the test or clean the test cell.

· Minimal amount of fluid required to test without impacting lubrication level

· Must be ASTM D8092 Compliant

· Oil condition Monitor

· Infrared Spectrometer used for oil contamination testing

· Ability to calibrate to unique oil-specific algorithms

· Solvent free operation: No solvent needed to perform the test or clean the test cell.

· Minimal amount of fluid required to test without impacting lubrication level

· Ability to measure engine oil total base number (TBN), water, glycol, soot, additive depletion, and oxidation

· Ability to measure total acid number (TAN), water, and oxidation in hydraulic and gearbox oils

· Must be ASTM D7889 compliant

· System must be portable, each individual piece of equipment with case should weigh approximately 20lb or less

· Stored in a weather resistant transportable case

· System must be battery operated with a minimum 6hrs of run time between charges

· Kit must include battery charger, USB cables, support software, user’s manual/programing instructions for both devices.

· Include pipettes and cleaning pads for a minimum of 100 samples