NWWV41002300118KAW SON and Attachment 1.pdf

STATEMENT OF NEED

NW-WV4100-22-00118

PURPOSE:

The National Oceanic and Atmospheric Administration (NOAA) National Weather Service (NWS) Alaska Region Headquarters (ARH) is seeking replacement parts for the H-Frames that are part of the Automated Surface Observation Systems (ASOS) program at 27 Federal Aviation Administration (FAA) sites. These parts will allow the NWS Alaska Region to expedite the replacement of the failing obsolete equipment for the H-Frames that are critical to the forecasting process.

BACKGROUND:

The ASOS program is a joint effort of the NWS, the FAA, and the Department of Defense (DOD). The ASOS program serves as the nation’s primary surface weather observing network. ASOS is designed to support weather forecast activities and aviation operations and, at the same time, support the needs of the meteorological, hydrological, and climatological research communities. ASOS works non-stop, updating observations every minute, 24 hours a day, every day of the year.

The NWS Alaska Region is responsible for 42 ASOS locations installed throughout Alaskan airports providing hourly, special, augmented and radio weather information to the aviation community in support of the local communities. Power is provided through a commercial source and then gets routed to the ASOS H-Frame (NWS Owned). Commercial power is installed to the ASOS H-Frame consisting of exposed electrical boxes, switches and transformers providing all the ASOS DCP and Sensor group its AC Power.

Preventive maintenance on all exposed parts to include sanding and painting has been completed over the years. The units are no longer cost effective and efficient to maintain. The replacement parts will upgrade roughly 27 FAA ASOS sites.

TECHNICAL SPECIFICATIONS:

The contractor shall provide all parts and quantities listed in Attachment 1 – Parts List. Where a brand is stated, parts must be brand name or equal.

This requirement is for parts only. All site coordination and labor will be furnished by the NWS Alaska Region to expedite the replacement of the failing obsolete equipment critical to the forecasting process.

PERIOD OF PERFORMANCE / DELIVERY:

Delivery within 60 days after contract award.

Deliver to:

National Weather Service 6930 Sand Lake Road Anchorage, AK 99502 Attention: Randy Davis

GOVERNMENT POINT OF CONTACT:

Randy Davis Phone: 907-687-9841 Email: randy.davis@noaa.gov mailto:randy.davis@noaa.gov

ATTACHMENT 1 - PARTS LIST

LN Product Qty

01 NSI IPL43

POLARIS #4-14 ONE SIDE CONN

14 AWG MIN. CONDUCTOR SIZE; 4 AWG MAX. CONDUCTOR SIZE; COPPER/ALUMINUM CONDUCTOR MATERIAL; UL (CANADA AND US), UL 486B APPROVAL; 600 VOLT VOLTAGE RATING; HIGH DIELECTRIC STRENGTH PLASTISOL BODY MATERIAL; 3 PORT(S); 1-SIDE ENTRY CABLE

ENTRY; POLARIS BRAND

02 NSI IT4

4-14 AWG INSUL-TAP CONN

14 AWG MIN. CONDUCTOR SIZE; 4 AWG MAX. CONDUCTOR SIZE; COPPER/ALUMINUM CONDUCTOR MATERIAL; UL (CANADA AND US), UL 486B APPROVAL; 600 VOLT VOLTAGE RATING; PLASTISOL BODY MATERIAL; 2 PORT(S); 1-SIDE ENTRY CABLE ENTRY; POLARIS BRAND

03 SQD D222NRB

60A-240V-3SN RT SW

SAFETY SWITCH, GENERAL DUTY, FUSIBLE, 60A, 2 POLES, 15 HP, 120 VAC, NEMA 3R, BOLT-ON PROVISION, NEUTRAL FACTORY INSTALLED

05 LF FLNR040ID

250V INDCATOR FUSE

UL CLASS RK5 DUAL-ELEMENT TIME-DELAY FUSE WITH INDICATION

07 FIT NIPGAL1-1/2X6

GALV NIP

STRAIGHT TYPE; STEEL MATERIAL; GALVANIZED FINISH; 6 INCH; UL 6 APPROVAL; ANSI C80.1 APPLICABLE STANDARD; 1-1/2 INCH TRADE

SIZE; THREADED END TYPE

08 FIT NIPGAL1-1/2X8

GALV NIP

THREADED MALE TYPE; HOT DIP GALVANIZED STEEL MATERIAL; 8 INCH; RIGID CONDUIT USED ON; UL APPROVAL; 10 PER CARTON

STANDARD PACKAGE; 1-1/2 INCH TRADE SIZE; THREAD LENGTH 1.03 INCH; TPI 11-1/2

09 TB H150TB

1-1/2 ZINC DC HUB

1-1/2 INCH ZINC CONDUIT HUB

10 FACTORY STOCK

11 ILSCO IK1/0

1/0AWG SPLIT BOLT 1/0-4SOL

CU MEC (R)4SOL-1/0 (T)14SOL ULCSA REA

12 CIRAW 4436GRTNK

NM3R WRNG TROUGH

16 GAUGE STEEL MATERIAL; ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH; 36 INCH; 4 INCH; 4 INCH; UL 870, CSA C22.2, IEC 529 APPROVAL; NEMA 3R, IP24 ENCLOSURE; SCREW COVER TYPE; WIRING TROUGH; NO KNOCKOUT(S)

14 SQD HEPD50

SPD T2 HEPD 50KA

SURGE PROTECTION DEVICE, HEPD, 50KA, 120/240 V, 1 PHASE, 3 WIRE, SPD TYPE 1

16 CULLY 40125J

1/4-20 ZP HEX NUT

HEX TYPE; STEEL MATERIAL; ZINC PLATED FINISH; 1/4 INCH NOMINAL DIAMETER; 20 TPI; OVERALL DIMENSION 7/16 INCH WIDTH X 0.186

INCH HEIGHT; THREAD TYPE COARSE; THREAD DIRECTION RIGHT HAND; COLOR SILVER

WHERE A BRAND IS STATED, PARTS MUST BE BRAND NAME OR EQUAL

Customer Quote For: US MISC-03

LN Product Qty

17 BLINE N224ZN

PLTD SPRING NUT 1/4"

EATON B-LINE SERIES STRUT CHANNEL, NUTS, ALL THREADED ROD, STEEL, CHANNEL NUTS, NUT WITHOUT SPRING, ELECTRO-PLATED ZINC, 250 LBS PULL OUT STRENGTH, 300 LBS SLIP STRENGTH, 3/8IN -16 THREAD SIZE

18 CULLY 40725J 100

1/4X1-1/4 ZP FENDER WSHR

STEEL MATERIAL; ZINC PLATED FINISH; 1/4 INCH INNER DIAMETER; 1-1/4 INCH OUTER DIAMETER; 0.047 TO 0.08 INCH THICKNESS;

APPLICATION AUTO BODY REPAIR WORK, SHEET METAL, PLUMBING, AND ELECTRICAL WORK

19 BLINE B54SH120GLV 1080

STRUT SLOTTED 13/16" 14 GA

EATON B-LINE SERIES STRUT CHANNEL, .81IN CHANNEL HEIGHT, 120IN CHANNEL LENGTH, 1.62IN CHANNEL WIDTH, STEEL, 14 GAUGE, SH

HOLE PATTERN, B54 CHANNEL, PRE-GALVANIZED

20 BLINE B22SH120GLV 1080

STRUT DEEP SLOTTED 1-5/8"

EATON B-LINE SERIES STRUT CHANNEL, 1.62IN CHANNEL HEIGHT, 120IN CHANNEL LENGTH, 1.62IN CHANNEL WIDTH, STEEL, 12 GAUGE, SH

HOLE PATTERN, B22 CHANNEL, PRE-GALVANIZED

21 BLINE B2015PAZN 162

PLTD RIGID CLAMP 3"

EATON B-LINE SERIES STRUT PIPE CLAMPS AND ACCESSORIES, .0994IN HEIGHT, 5.843IN LENGTH, 1.25IN WIDTH, STEEL, PRE-ASSEMBLED

COMBINATION RECESS HEX HEAD SCREW, PIPE OR CONDUIT CLAMPS, ELECTRO-PLATED ZINC

22 WIRE XHHW10STRRED 500

500' REEL

XHHW-2 TYPE; 500 FOOT; 171 MIL OUTER DIAMETER; SOFT ANNEALED COPPER CONDUCTOR MATERIAL; UL 44 APPROVAL; 600 VOLT VOLTAGE RATING; 30 AMP CURRENT RATING; 90 DEG C (WET/DRY) TEMPERATURE RATING; 40 POUND PER 1000 FOOT WEIGHT

23 WIRE XHHW10STRBLACK 500

500' REEL

XHHW-2 TYPE; 500 FOOT; 171 MIL OUTER DIAMETER; SOFT ANNEALED COPPER CONDUCTOR MATERIAL; UL 44 APPROVAL; 600 VOLT VOLTAGE RATING; 30 AMP CURRENT RATING; 90 DEG C (WET/DRY) TEMPERATURE RATING; 40 POUND PER 1000 FOOT WEIGHT

24 WIRE XHHW10STRWHITE 500

500' REEL

XHHW-2 TYPE; 500 FOOT; 171 MIL OUTER DIAMETER; SOFT ANNEALED COPPER CONDUCTOR MATERIAL; UL 44 APPROVAL; 600 VOLT VOLTAGE RATING; 30 AMP CURRENT RATING; 90 DEG C (WET/DRY) TEMPERATURE RATING; 40 POUND PER 1000 FOOT WEIGHT

25 WIRE XHHW10STRGREEN

500' REEL

XHHW-2 TYPE; 500 FOOT; 171 MIL OUTER DIAMETER; SOFT ANNEALED COPPER CONDUCTOR MATERIAL; UL 44 APPROVAL; 600 VOLT VOLTAGE RATING; 30 AMP CURRENT RATING; 90 DEG C (WET/DRY) TEMPERATURE RATING; 40 POUND PER 1000 FOOT WEIGHT

26 CULLY 37530

SILICONE SEALANT CLR

100% CLEAR SILICONE SEALANT, 1

27 IDEAL 30454

454 BLU WIRECONN QTY 25

CONTOURED WING TYPE; BLUE COLOR; (5 TO 6) 14 AWG MIN. WIRE COMBINATION SIZE; (1 TO 2) 6 AWG MAX. WIRE COMBINATION SIZE;

14 TO 6 AWG WIRE SIZE; UL, CSA, IEC APPROVAL; 600 VOLT VOLTAGE RATING; 221 DEG F TEMPERATURE RATING; SOLID AND/OR

STRANDED WIRE TYPE

28 3M 7100201470

VNL ELECL TAPE 33+

06132 SUPER 33+ 3/4 IN X 76 FT

29 HAMMO 1PH 5KVA 240V-600V 60HZ AL

TRANSFORMER DRY 1PH 5KVA

30 HAMMO 1PH 5KVA 480V-120V 60HZ AL

TRANSFORMER DRY 1PH 5KVA

31 HAMMO 1PH 5KVA 600V-240/120V 60HZ AL

TRANSFORMER DRY 1PH 5KVA

32 HAMMO 1PH 5KVA 240V-120V 60HZ AL

TRANSFORMER DRY 1PH 5KVA

34 SQD Q-4091751

SE ADV BOM RBT

Customer Quote For: US MISC-03

LN Product Qty

36 SQD NQ18L1C

18CKT 100A 1PH NQ PNLBD INT

NQ PNLBRD INTERIOR 100A, 1 PH, 3 WIRE, 18 CCT, MN LUG, CU

37 SQD PK27GTA

GRNDG BAR KIT

LOAD CENTER ACCESSORY, QO/HOMELINE, GROUND BAR KIT, 27 TERMINALS

38 SQD NQFP15

NQ FILLER PLATE KIT (PKG OF 15)

NQ PANELBOARD ACC. FILLER PLATE KIT QTY 15

39 SQD MH26BE

PANELBOARD BOX

NQNF, ENCLOSURE BOX, TYPE 1, BLANK END WALLS, 20 X 26 X 5.75 IN

40 SQD NC26S

PNLBRD FRONT SURFACE

ENCLOSURE COVER - NQNF - TYPE 1 - SURFACE - 20X26IN