NO.2- MC R4- 052423 CLEAN COPY SOW REVDMPP 040723 E60-0004_SOW Sand and Dust Test ESSM Cell Covers min mod_HD.docx

Statement of Work For MK 29 Guided Missile Launching System Launcher Cell Covers Testing

03 APRIL 2023

1 Scope:

This task is to conduct Sand and Dust testing in accordance with MIL-STD-810H on the MIN MOD Cell Cover. This is to support validation of design and functionality for use of the Cell Cover with the ESSM BLK 2 Missile when loaded in the MK 132 Launcher.

2 Applicable Documents:

Cell Cover Test Plan

MIL-STD-810H

2.1 Department of Defense Drawings (1):

Drawing 10706-A-001 AFT CELL COVER, BLK 2

2.2 Government Standards:

MIL-STD-31000A, TECHNICAL DATA PACKAGES

MIL-STD-810H

3. Requirements:

3.1 General:

The standards for the test are: the extended cell cover will be clamped to a test fixture with a compression force equivalent to that made by the cell cover door, and elevated to the center of the test chamber, facing the dust stream as laid out in the Cell Cover Test Plan. Test will be in accordance with MIL-STD-810H method 510.7 for blowing dust particles. The contractor shall provide all resources necessary to accomplish the tasks and deliverables described in this Statement of Work (SOW).

3.2 The contractor shall provide a test report for the tests conducted and provide pass/fail data.

3.3 Shipping:

NSWC PHD will provide the cell covers to be tested by the contractor as identified in section 3.8 below. The contractor will ship the Government provided cell covers back to NSWC PHD within two weeks of submission of the test report (see section 3.6). The contractor shall furnish any necessary transportation fixture and/or crates when shipping cell covers back to Naval Surface Warfare Center PHD 4363 Missile Way, Attn: Julian Niderost, Bldg. 1387, FL 2 Cube #2W-16A1, Port Hueneme, CA 93043,POC: Julian Niderost 805-228-6611, julian.b.niderost.civ@us.navy.mil. If shipping charges apply (FOB Destination), please add the estimated shipping cost for ground freight shipments to your quote.

3.4 Place of Performance:

Testing to be done at the vendor’s location and within the United States.

3.5 Meetings:

3.5.1 Post-award Kickoff Meeting:

Within 10 business days of contract award, the Government will conduct a post-award kickoff teleconference.

3.5.2 Intermittent Project Status Reviews:

At the sole discretion of the Government, intermittent project status reviews maybe conducted on an informal basis by telephone, teleconference, or on-site meeting.

3.6 Delivery, Deliverables and Furnished Items:

Schedules for deliverables specified below. All deliverables shall be prepared and submitted according to format, content, and schedule described in this section and section 3.7.

Cell cover(s) will be shipped by the Government to the Vendor within 1 week of Contract award.

The Vendor will conduct testing within 2-4 days of receipt of the Government furnished Cell cover(s).

The Vendor will generate and provide the Government with a formal test report in accordance with section 3.7 within 2 weeks of receipt of the Government furnished Cell cover(s).

The Vendor will return the cell cover to PHD in accordance with section 3.3 within 2 weeks of providing the Government with a test report.

3.7 Sample Items:

Vendors must generate and provide the Government with test reports and status updates of Cell Cover P/N: 10706-A-001. Status updates will consist of vendor updates regarding receiving the cell cover, testing start date, completion and any unforeseen issues. Status updates must be completed and furnished to the Government upon request weekly.

Test reports will be formal reports that include photographs of the unit under test during testing. Separate test reports will be written for the MIL-STD-810H tests. Test reports must be provided in accordance with section 3.6 and 3.9.

3.8. Government Furnished Equipment:

Part to be tested will be provided by the Government and must be returned by the Vendor to the Government upon completion of Test. The vendor will have two weeks after submission of the test report to return the cell cover in accordance with sections 3.3 and 3.6.

3.9 Point of Delivery:

Test Report delivered to:

For Test Report:

Commander Naval Surface Warfare Center, Port Hueneme Division 4363 Missile Way, Bldg. 1387, FL 2 Cube #2W-16A1, POC: Julian Niderost, 805-228-6611, julian.b.niderost.civ@us.navy.mil Port Hueneme, CA 93043-4307 *Please reference contract number upon shipping*

3.10 Government Points of Contact (POCs):

3.10.1 Technical POC:

Julian Niderost, NSWC Division, Port Hueneme, Code E62, julian.niderost@navy.mil

3.10.2 Requirement Generator & Alternate Technical POC:

Phil Chowdhury, Code E24, firozul.chowdhury@navy.mil

3.10.3 Contracting POC:

Phil Chowdhury, NSWC PHD, Port Hueneme Code 0243, firozul.chowdhury@navy.mil