Specifications.docx

Differential Twinax Connector Hardware Specifications Project: HSRL2/HALO April 22, 2016

D-SUB Twinax Connector System

· Four-piece, twin-axial, 6 contact, D-Sub connector system

· Straight, Rear Panel Mount, Receptacle [Smiths Connectors Part # 052700-3016 or Equivalent]:

· Quantity: 20

· Physical D-Sub Mating Face dimensions no larger than 3.15” by 0.55”

· Does not include contacts

· Right Angle, Rear Panel Mount, Printed Circuit Board Mount Receptacle [Smiths Connectors Part # 052717-1016 or Equivalent]:

· Quantity: 24

· Physical D-Sub Mating Face dimensions no larger than 3.15” by 0.55”

· Includes contacts

· Plug [Smiths Connectors Part # 052800-2006 or Equivalent] :

· Quantity: 48

· Physical D-Sub Mating Face dimensions no larger than 2.6” by 0.55”

· Contains EMI grounding fingers for low electrical resistance of connector plug shell to mating receptacle

· Does not include contacts

· Backshell [Smiths Connectors Part # 057330-2106 or Equivalent]:

· Quantity: 48

· Overall dimensions of housing not to exceed 2.6”by 0.55” by 1.75”

· Twinax Pin Contact [Smiths Connectors Part # 019234-2017 or Equivialent]:

· Quantity: 120

· Compatible with Straight, Rear Panel Mount Receptacle

· See Overall Electrical Specifications

· Diameter no larger than 0.275”

· Twinax Socket Contact [Smiths Connectors Part # 019134-2017 or Equivalent]:

· Quantity: 320

· Compatible with Plug

· See Overall Electrical Specifications

· Diameter no larger than 0.275” Tooling

· Inspection Tool for Twinax assembly to verify correct contact/wire length required

· Inspection Tool [Smiths Connectors Part # T-2172 or Equivalent]

· Quantity: 5 Cable

· Flexible Twinax Cable, 100 Ohm +/- 10 Ohms differential Impedance, 50 Ohm +/- 7 Ohms Signal to Shield Impedance, that is compatible with D-Sub and Push Pull Twinax connector systems

· Flexible Twinax Cable [Smiths Connectors Part # 540-1161-000 or Equivalent]

· Quantity: 2500 Feet

Push-Pull Twinax Connector System

· Two-piece, twin-axial, 1 contact, push-pull connector system

· Straight, Printed Circuit Board Mount, Receptacle [Smiths Connectors Part # 014117-2023 or Equivalent]:

· Quantity: 150

· Dimensions shall be no larger than 0.189” by 0.189” by 0.5” (0.5” is height from PCB surface to top of receptacle)

· Plug [Smiths Connectors Part # 014034-2050 or Equivalent]:

· Quantity: 100

· Dimensions shall be no larger than 0.3” (diameter) by 1.0” long

· Contains a grip feature (e.g. diamond knurl or equivalent)

· Max Insertion/Removal force: 5 lbs.

· Shall be compatible with Twinax cable accepted by D-Sub Twinax Connector System

Overall Electrical Specifications

Overall Mechanical & Environmental Specification