Nikon_Z6_II_Mirrorless_Cameras.pdf

City of Tampa

REQUEST FOR QUOTES (RFQ) FOR

Nikon Z6 II Mirrorless Cameras

26-P-00224

Police

Matthew Evans matthew.evans@tampagov.net

Table Of Contents

1. Instructions to Bidders

2. General Conditions

3. Technical Specifications

4. Price Proposal

5. Vendor Questionnaire

1. Instructions to Bidders

1.1. Instructions to Bidders

City of Tampa quote solicitations are issued electronically via OpenGov solicitation distribution system. Obtaining quote solicitations through OpenGov will ensure that vendors will have the following capabilities: receipt of quote solicitations electronically via e-mail and view plans and blueprints online electronically. Vendors who obtain specifications and plans from sources other than OpenGov are cautioned that the quote packages may be incomplete.

The City is not responsible for errors and omissions occurring in the transmission or downloading of any quote documents, plans, or specifications from this website. In the event of any discrepancy between information on this website and the hard copy quote documents, the terms and conditions of the hardcopy document will prevail. OpenGov has no affiliation with the City of Tampa other than as a service that facilitates communication between the City and its vendors. OpenGov is an independent entity and is not an agent or representative of the City. Communications to OpenGov does not constitute communications to the City.

Contact OpenGov at https://opengov.my.site.com/support/s/ for more information.

Quotes shall be accepted no later than the time and date specified on the quote transmission. All quotes shall be submitted electronically through OpenGov. Offers by telegram, telephone, mail, e-mail, or fax are not acceptable, unless authorized by the City of

Tampa Purchasing Department prior to the closing time and date. No quote may be withdrawn or modified after the time fixed for the opening of quotes. Quote tabulations (results) will not be disclosed over the telephone.

The Bidder shall comply with the applicable requirements of Federal and state laws, all Codes and Ordinances of the City of Tampa as amended from time to time, and any applicable professional regulations.

The bidder is expected to carefully examine the entire quote solicitation and all of its attachments, including but not limited to all provisions, terms, and conditions. Failure to do so will be at the bidder’s risk.

Quote solicitations contain a General Conditions section and a Technical Specification section. The attached General Conditions contain general requirements and the Technical Specifications, viewable through OpenGov, details the scope of the goods and/or services requested. The Technical Specifications shall always govern whenever there appears to be a conflict.

2. General Conditions

2.1. Authorization

Official award will be made by City of Tampa Purchase Order only. Purchases under $2,000 may also be placed by City of Tampa

Purchasing Card (Visa).

2.2. Quantities

Quantities listed are an estimate only. The City shall not be required to purchase any minimum or maximum quantities during any award resulting from this quote. The City reserves the rights to increase or decrease quantities shown without penalty.

2.3. Shipping/Delivery

All items shall be shipped Freight On Board (FOB) Destination. All shipping, handling, and freight charges shall be included in the quote. Materials ordered shall be delivered to the location specified and within the days After Receipt of Order (ARO) as stated in the

Technical Specifications.

2.4. Addition/Deletion

The City of Tampa reserves the right to add to or delete any item from this bid or resulting award when deemed to be in the best interest of the City of Tampa.

2.5. Rejection

The City reserves the right to cancel, reject any and/or all quotes, or to waive irregularities and accept that quote which is the lowest and best.

2.6. Non-Availability of Funds

In the event that funds are insufficient or unavailable for this quote or the resulting intent to award, the City reserves the right to cancel the quote or resulting intent to award without penalty.

https://opengov.my.site.com/support/s/

2.7. Substitutions / Alternate Quotes

Unless otherwise specified in the Technical Specifications, quotes for alternate products which the bidder believes to be of equal quality will be considered. The offer of an alternate product for any item shall be construed as a refusal to quote on the product specified.

Bidders offering an alternate product shall submit the precise specifications of the alternate and all of the differences, if any, between the specified product and the alternate product. The determination as to whether any alternate product quoted is or is not equal to the product specified shall be made by the City, and such determination shall be final and binding for all bidders.

2.8. Prices

Quote prices shall be good for a minimum of sixty (60) days unless otherwise specified in the Technical Specifications.

2.9. Basis of Award

The City reserves the right to award this quote by division, line item, or aggregate total. To be considered lowest responsive, responsible bidder by aggregate, the bidder must quote on all items within the quote solicitation. If award by aggregate total is not feasible, division or line item will prevail.

2.10. Insurance

All vendors performing work on City property, regardless of the dollar amount, are required to submit proof of insurance prior to award. The City’s current insurance requirements can be found on the Purchasing Department website at http://www.tampa.gov/purchasing/info

2.11. Subcontracting Submittals

No Awardee shall assign the award/contract or any rights or obligations thereunder without the written consent of the City. The

Awardee shall be required to perform with its own forces at least fifty-one (51) percent of the work, unless written consent to subcontract a greater percentage of the work first obtained by the City. In the event of such approved subcontracting, the Awardee agrees to provide the City with written documentation relative to the Subcontractor(s) solicited, or that will be employed in this award, including but not limited to submittal of attached the following Schedule of Sub-Contracting Forms:

• Schedule of All Sub-Contractors/Consultants/Suppliers Solicited - DMI 10

• Schedule of Sub-Contractors/Consultants/Suppliers to be Utilized - DMI 20 Further information and copies of all forms can be found at http://www.tampa.gov/msbd

Subcontractor shall be defined as: a business enterprise, firm, partnership, corporation, consultant, or combination thereof having a direct contract with a prime contractor for any portion of the advertised work that is awarded by the owner/owner's representative.

Supplier shall be defined as: a business enterprise that either directly contracts with a prime contractor/consultant or directly contracts with a subcontractor under such a prime contractor/consultant to provide materials, supplies, or equipment in connection with a contract awarded by the owner/owner’s representative. A supplier may be a regular dealer, distributor, or manufacturer.

2.12. Invoicing

The awardee shall furnish the City complete itemized invoices for the goods received. Invoices are to reflect the prices stipulated on the purchase order and as outlined in the quote solicitation. Invoices shall contain, but not be limited to the following information:

• Invoice number;

• Company name;

• Purchase Order number;

• Location and dates of delivery;

• Cost of items as stated on the quote response and extended price to reflect total cost for number of items received.

If subcontractors will be utilized during this award, the awardee agrees to provide the City with written documentation relative to the subcontractor(s) payments, including but not limited to submittal ofSchedule of Sub-Contractors/Consultants/Suppliers Payments http://www.tampa.gov/purchasing/info http://www.tampa.gov/msbd

,Waiver and Release of Lien upon Progress Payment , and/orAffidavit of Contractor in Connection with Final Payment . Further information and copies of all forms can be found at www.tampa.gov/msbd

2.13. Payment

Full payment will be made by the City after receipt and acceptance of materials/services, correct invoices, subcontractor(s) payments forms, and normal processing time – approximately 30 days in total. The City does not pay service charges on late payments; however the City is subject to the Florida Prompt Payment Act. (see Section 218.70-218.79, Florida Statues.) An incorrect invoice may delay payment for services/materials provided.

2.14. Tampa Port Access

All personnel assigned to provide this service or required to deliver goods to the Port of Tampa, if applicable in this award, shall obtain a Port Access Badge. To obtain this port pass will require each employee to have a valid photo ID and will require background check including fingerprinting. It is the responsibility of the Awardee to obtain badges before work begins or prior to delivery. The cost shall be incurred by the Awardee. Documentation, pricing and other information related to the access requirements for the Port of Tampa can be found at: https://www.porttb.com/port-security/

2.15. Employee Verification

Awardee must utilize the U.S. Department of Homeland Security’s E-Verify Systems to verify the employment eligibility of all persons employed during the term of the award to perform employment duties within the State of Florida and all persons, including subcontractors, assigned by Awardee to perform work pursuant to the award.

2.16. Florida Public Records Law

In accordance with Chapter 119 of the Florida Statutes, and, except as may be provided by Chapter 119 of the Florida Statutes and other applicable State and Federal Laws, all Bidders should be aware that the Bid and the responses thereto are in the public domain and are available for public inspection and copying. If the Bidder is asserting that certain information in its Bid is confidential and/or proprietary and/or exempt from public disclosure, then the Bidder is required to do the following: (1) identify, with specificity, the information which the Bidder asserts is confidential and/or proprietary and/or exempt from public disclosure, (2) place such information

(including any applicable electronic media on which such information is contained) in a sealed envelope that is separate from the

Bidder's other Bid documents, (3) clearly label the envelope that contains the confidential, proprietary and/or exempt information as follows: "EXEMPT FROM PUBLIC DISCLOSURE" with Bidder's name and the Bid number marked on the outside, and (4) specifically cite the applicable Florida Statute(s) that exempts such information from public disclosure such citation must be placed on the sealed envelope and also on a separate document contained within the sealed envelope along with any relevant explanations. The envelope that contains the Bidder's confidential/proprietary/exempt information must be submitted with the Bidder's other Bid documents. Bidder is advised that failure to follow the aforementioned instructions may result in Bidder's alleged confidential/proprietary/exempt information being disclosed to the public. All submittals received in response to this Bid will become the property of the City of Tampa and will not be returned. In the event of an award, all documentation produced as part of the contract will become the exclusive property of the City.*

Be aware that the designation of an item as exempt from public disclosure by a Bidder may be challenged in court by any person or entity. By designation of material in your Bid submittal as exempt from public disclosure, Bidder agrees to defend the City of Tampa

(and its employees, agents and elected and appointed officials) against all claims and actions (whether or not a lawsuit is commenced) related to Bidder’s designation of material as exempt from public disclosure and to hold harmless the City of Tampa (and its employees, agents and elected and appointed officials) for any award to a plaintiff for damages, costs and attorneys’ fees, and for costs and attorneys’ fees incurred by the City by reason of any claim or action related to your designation of material as exempt from public disclosure.

*Note: The City will not accept Bid submittals when the entire submittal is labeled as exempt from public disclosure.

Bidder’s References and Cost or Price information will be deemed a public record, and if a claim of confidentiality/proprietary information is made, the City may deem the Bid submittal as “non-responsive”.

In accordance with section 119.071(1)(b)2, Florida Statutes, sealed bids, proposals, or replies received by the City of Tampa pursuant to a competitive solicitation are exempt from section 119.07(1), Florida Statutes and section 24(a), Art. I of the State Constitution until http://www.tampa.gov/msbd https://www.porttb.com/port-security/ https://www.porttb.com/security such time as the City of Tampa provides notice of an intended decision or until 30 days after opening the bids, proposals, or final replies, whichever is earlier.

In accordance with section 119.071(1)(b)3, Florida Statutes, if the City of Tampa rejects all bids, proposals, or replies submitted in response to a competitive solicitation and the City of Tampa concurrently provides notice of its intent to reissue the competitive solicitation, the rejected bids, proposals, or replies remain exempt from section 119.07(1), Florida Statutes and section 24(a), Art. I of the State Constitution until such time as the City of Tampa provides notice of an intended decision concerning the reissued competitive solicitation or until the City of Tampa withdraws the reissued competitive solicitation. A bid, proposal, or reply is not exempt for longer than 12 months after the initial City of Tampa notice rejecting all bids, proposals, or replies.

The City of Tampa is a public agency subject to Chapter 119, Florida Statutes. In accordance with Florida Statutes, 119.0701, Awardee agrees to comply with Florida’s Public Records Law, including the following:

i. Awardee shall keep and maintain public records required by the City to perform the services;

ii. Upon request from the City, Awardee shall provide the City with copies of the requested records, having redacted records in total or in part that are exempt from disclosure by law or allow the records to be inspected or copied within a reasonable time (with provision of a copy of such records to the City) on the same terms and conditions that the City would provide the records and at a cost that does not exceed that provided in Chapter 119, Florida Statutes, or as otherwise provided by law;

iii. Ensure that public records, in part or in total that are exempt or that are confidential and exempt from public record requirements are not disclosed except as authorized by law for the duration of the contract term and following completion (or early termination) of the contract if the Contractor does not transfer the records to the City;

iv. Upon completion (or earlier termination) of the award, Awardee shall within 30 days after such event either transfer to the City, at no cost, all public records in possession of the Awardee or keep and maintain the public records in compliance with Chapter 119, Florida Statutes. If Awardee transfers all public records to the City upon completion (or earlier termination) of the award, Awardee shall destroy any duplicate records that are exempt or confidential and exempt from public records disclosure requirements. If Awardee keeps and maintains public records upon completion

(or earlier termination) of the award, Awardee shall meet all applicable requirements for retaining public records. All records stored electronically must be provided to the City in a format that is compatible with the information technology systems of the agency.

v. The failure of Awardee to comply with Chapter 119, Florida Statutes, and/ or the provisions set forth above shall be grounds for immediate unilateral termination of the contract by the City; the City shall also have the option to withhold compensation due Awardee until records are received as provided herein.

IF THE AWARDEE HAS QUESTIONS REGARDING THE APPLICATION OF CHAPTER 119, FLORIDA STATUTES TO THE

AWARDEE’S DUTY TO PROVIDE PUBLIC RECORDS RELATING TO THIS AWARD, CONTACT THE CUSTODIAN OF PUBLIC

RECORDS AT 813/274-8351,

https://cityoftampa.govqa.us/WEBAPP/_rs/(S(vibddvcchtrkqdyvbitqictk))/SupportHome.aspx OR MAILING ADDRESS

OF PURCHASING DEPARTMENT, CITY CENTER AT HANNA, 2ND FLOOR, 2555 E HANNA AVENUE, TAMPA, FL 33610.

2.17. City of Tampa Ethics Code

The Bidder shall comply with all applicable governmental and city rules and regulations including the City's Ethics Code which is available on the City's website. (City of Tampa Code, Chapter 2, Article VIII. - Section 2-522). Moreover, each Bidder responding to this

Invitation to Bid or Request for Proposal acknowledges and understands that the City's Charter and Ethics Code prohibit any City employee from receiving any substantial benefit or profit out of any contract or obligation entered into with the City, or from having any direct or indirect financial interest in effecting any such contract or obligation. The Awardee shall ensure that no City employee receives any such benefit or interest as a result of the award of this Invitation to Bid or Request for Proposal. (City of Tampa Code, Chapter 2, Article VIII Section 2-514(d)).

Please note that the City's Ethics Code may be accessed on the Internet by utilizing the website link http://www.tampa.gov/human-resources/info/lobbyist-information or can be found in the City of Tampa’s municipal codes published online by the Municipal Code

Corporation at the website link https://www.municode.com/library/fl/tampa/codes/code_of_ordinances. Printed copies of the Ethics

Code can also be obtained from the City Clerk's Office for a fee of $0.15 cents a page.

https://cityoftampa.govqa.us/WEBAPP/_rs/(S(vibddvcchtrkqdyvbitqictk))/SupportHome.aspx http://www.tampa.gov/human-resources/info/lobbyist-information http://www.tampa.gov/human-resources/info/lobbyist-information https://www.municode.com/library/fl/tampa/codes/code_of_ordinances

2.18. Indemnification

Contractor/Successful Proposer/Awardee/Firm (collectively the “Firm”) releases and agrees to defend, indemnify and hold harmless the

City, its officers, elected and appointed officials, employees, and/or agents (collectively, “City Indemnified Parties”) from and against any and all losses, liabilities, damages, penalties, settlements, judgments, charges, or costs (including without limitation attorneys’ fees, professional fees, or other expenses) of every kind and character arising out of any and all claims, liens, demands, obligations, actions, proceedings or causes of action of every kind and character, caused by or resulting from, directly or indirectly, in whole or in part, any act, negligence, recklessness, wrongful misconduct, omission or other conduct of Firm or any tier of subcontractor/subconsultant/ supplier, agent, employee, or anyone for whom Firm may be liable, in connection with, arising directly or indirectly out of the execution or performance of the obligations assumed under or incidental to the document to which this section/article/exhibit is incorporated (singularly or collectively “Claims”), unless such injuries or damages are the result of the sole negligence or willful acts or omissions of the City Indemnified Parties.

Without limiting the foregoing, any and all such Claims, including but not limited to personal injury, disease, sickness, death, damage to property, natural resources, or the environment (including destruction or loss of use, costs of hazardous or toxic substance cleanup and disposal), defects in materials or workmanship, actual or alleged infringement of any patent, trademark, copyright (or application for any thereof) or of any other tangible or intangible personal or property right, or any actual or alleged violation of common law, any applicable law, statute, ordinance, administrative order, rule, or regulation or decree of any court, shall be included in the indemnity hereunder and, to the extent required, the defined term “Claims”. Firm further agrees to investigate, handle, respond to, provide defense (including without limitation attorney fees, paralegal fees, and expert fees to and through appellate, supplemental, or bankruptcy proceedings) for and defend such Claims at its sole cost and expense through counsel approved in advance and in writing by the City and agrees to bear all other costs and expenses related thereto, even if the Claims are groundless, false, or fraudulent. Firm shall advance or promptly reimburse to the City any and all costs and expenses incurred by a City Indemnified Party in connection with investigating, preparing to defend, settling, or defending any legal proceeding for which the City Indemnified Party is entitled to indemnification hereunder. Firm agrees and recognizes that the City Indemnified Parties shall not be held liable or responsible for

Claims which may result from any actions or omissions of Firm in which the City Indemnified Parties participated either through providing data, advice, review, and/or concurrence of Firm’s actions. In reviewing, approving, or rejecting any submissions by Firm or other acts of Firm, the City Indemnified Parties in no way assume or share any responsibility or liability of Firm or any tier of subcontractor/subconsultant/supplier, under the document (hereinafter the “Agreement) to which this section/article/exhibit

(hereinafter “Article”) is incorporated.

This obligation is absolute and unconditional and shall in no way be limited by the amount or type of Firm’s insurance coverage, conditioned on any attempt by a City Indemnified Party to collect from an insurer, or subject to any set-off, defense, deduction, or counterclaim that the Contactor might have against the City Indemnified Party. The duty to defend hereunder is independent and separate from the duty to indemnify which shall exist regardless of any ultimate liability of Firm or any City Indemnified Party, and shall arise immediately upon presentation of a Claim and written notice of same being provided to Firm. Firm's defense and indemnity obligations hereunder will survive the Agreement’s expiration or earlier termination. In the event the law is construed to require a specific consideration for this indemnification, the parties agree that the sum of $10.00, receipt of which is hereby acknowledged, is the specific consideration for same and the providing of such indemnification is deemed to be part of the specifications with respect to the services provided by Firm.

Specifically, where the Agreement is a professional services contract with a design professional as defined in Section 725.08, Florida

Statutes, this Article shall be limited to Section

725.08. Further, where the Agreement is a construction contract for a public agency or in connection with a public agency’s project per

Section 725.06, Florida Statutes, this Article shall be limited to said Section 725.06. Moreover, whenever there appears in the

Agreement an indemnification within the purview of Section 725.06, Florida Statutes, the monetary limitation on the extent of the indemnification provided shall be $1 Million Dollars or a sum equal to the total contract price, service cost, or project value whichever is greater.

NOTWITHSTANDING ANYTHING IN THE FOREGOING TO THE CONTRARY, the parties agree that to the extent this Article is found to be in conflict with any provisions of Florida law, it shall be deemed automatically modified in such a manner as to be in full and complete compliance with all such laws, including containing such limiting conditions or limitations of liability and/or not containing any unenforceable or prohibited term or terms, such that this indemnification shall be enforceable in accordance with and to the maximum extent permitted by Florida law.

2.19. Non-Discrimination in Contracting and Employment

The following provisions are hereby incorporated into any contract executed by or on behalf of the City of Tampa. The Awardee shall comply with the following Statement of Assurance:

During the performance of this Award, the Awardee herein assures the City, that said Awardee is in compliance with Title VII of the

1964 Civil Rights Act, as amended, the Florida Civil Rights Act of 1992, and the City of Tampa Code of Ordinances, Chapter 12, in that the Awardee does not on the grounds of race, color, national origin, religion, sex, sexual orientation, gender identity or expression, age, disability, familial status, or marital status, discriminate in any form or manner against said Awardee’s employees or applicants for employment.

Awardee understands and agrees that this award is conditioned upon the veracity of this Statement of Assurance, and that violation of this condition shall be considered a material breach of this award. Furthermore, the Awardee herein assures the City that said Awardee will comply with Title VI of the Civil Rights Act of 1964 when federal grant(s) is/are involved. This Statement of Assurance shall be interpreted to include Vietnam-Era Veterans and Disabled Veterans within its protective range of applicability.

Awardee further acknowledges and agrees to provide the City with all information and documentation that may be requested by the

City from time to time regarding the solicitation, selection, treatment and payment of subcontractors, suppliers and vendors in connection with this award. Awardee further acknowledges that it must comply with City of Tampa Code of Ordinances, Chapter 26.5, as enacted by Ordinance No. 2008-89.

Per City of Tampa Code of Ordinances, Section 2-284, Bidder(s) are requested to provide information as to whether Bidder(s) has criminal history screenings similar in nature to the practices contained in Chapter 12, Article VI, City of Tampa Code of Ordinances. The

City of Tampa’s municipal codes are published online by the Municipal Code Corporation at the website link https://www.municode.com/library/fl/tampa/codes/code_of_ordinances.

2.20. Equal Opportunity

The City of Tampa hereby notifies all Bidders that all eligible businesses, including Small Local Business Enterprises (SLBEs), will be afforded a full opportunity to participate in any Award made by the City of Tampa pursuant to this present proposal matter and will not be subjected to discrimination on the basis of race, color, national origin, religion, sex, sexual orientation, gender identity or expression, age, disability, familial status, or marital status. The City of Tampa prohibits any person involved in City of Tampa contracting and procurement activities, to discriminate on the basis of race, color, national origin, religion, sex, sexual orientation, gender identity or expression, age, disability, familial status, or marital status.

3. Technical Specifications

3.1. Nikon Z6 II Camera

The

Nikon Z6 II is a versatile full-frame mirrorless camera designed for both high-end photography and professional videography. Key improvements over the original Z6 include dual EXPEED 6 processors, which boost autofocus speed and buffer capacity, and the addition of a second memory card slot

Core Technical Specifications

• Sensor: 24.5 MP Full-Frame (FX) BSI-CMOS sensor.

• Image Processor: Dual EXPEED 6 engines for increased speed and reduced blackout times.

• ISO Range: Native ISO 100–51,200 (expandable from ISO 50 to 204,800).

• Continuous Shooting: Up to 14 fps at full resolution (12-bit RAW with single-point AF).

• Autofocus: 273-point hybrid phase-detect/contrast AF system with Eye and Animal Detection for both stills and video.

• Stabilization: In-body 5-axis sensor-shift Vibration Reduction (VR), offering up to 5 stops of compensation.

• Video Capabilities:

o 4K UHD at up to 60p (with DX-crop) and 30p (full-frame).

https://www.municode.com/library/fl/tampa/codes/code_of_ordinances https://www.google.com/search?ibp=oshop&prds=pvt:hg,pvo:29,mid:576462484863643736,imageDocid:7985735566964820335,gpcid:773806313767761581,headlineOfferDocid:8941941572899784754,catalogid:17417077062156840015,productDocid:8402408422364504890,rds:PC_773806313767761581%7CPROD_PC_773806313767761581&q=product&sa=X&ved=2ahUKEwjvteue3r2TAxU-SjABHZNsEs4Qxa4PegQIAhAC o Full HD at up to 120p for slow-motion playback.

o Supports 10-bit N-Log and HLG (HDR) output via HDMI.

Design and Connectivity

• Memory Slots: Dual slots supporting CFexpress (Type B)/XQD and UHS-II SD cards.

• Viewfinder: 3.69M-dot Quad-VGA OLED electronic viewfinder (EVF) with 0.8x magnification.

• LCD Display: 3.2-inch, 2.1M-dot tilting touchscreen LCD.

• Build: Weather-sealed magnesium alloy chassis.

• Battery: Uses the EN-EL15c rechargeable battery; CIPA rated for approx. 340 shots (EVF) or 410 shots (LCD).

• Power: Supports USB-C power delivery for in-camera charging and continuous external power while shooting.

• Wireless: Built-in Wi-Fi and Bluetooth for use with the Nikon SnapBridge app.

3.2. Nikkor Z 24-120mm f/4 S Lens

The

NIKKOR Z 24-120mm f/4 S is a premium, all-purpose S-Line zoom lens for Nikon’s full-frame mirrorless cameras. It is widely praised for its high-resolution rendering, robust weather sealing, and impressive close-focusing capabilities.

Optical Specifications

• Focal Length Range: 24–120mm (5x zoom ratio).

• Aperture Range: Constant f/4 maximum aperture; minimum aperture of f/22.

• Lens Construction: 16 elements in 13 groups, featuring 3 ED glass, 1 aspherical ED glass, and 3 aspherical elements.

• Diaphragm: 9 rounded blades for smooth, natural bokeh.

• Optical Coatings: Nano Crystal Coat and ARNEO Coat to reduce ghosting and flare; Fluorine coat on the front element to repel dust and moisture.

Focus Performance

• Autofocus System: Multi-focus system using two synchronized STM stepping motors for fast, quiet, and precise focusing.

• Minimum Focus Distance: 1.15 ft (0.35m) from the focal plane at all zoom positions.

• Maximum Reproduction Ratio: 0.39x (approx. 1:2.6), making it excellent for "macro-lite" close-up photography.

3.3. Nikon EN-EL15C Rechargeable Li-Ion Battery 2 Pack Bundle

Nikon EN-EL15c Rechargeable Li-ion Battery (2-Pack) The EN-EL15c is a Rechargeable Lithium-ion Battery is designed for use with select Nikon Cameras including Z 5 Mirrorless Camera.

This battery has the EN-EL15 form factor and can be used as a higher capacity substitute for previous generation batteries. It can be charged using the MH-25 and MH-25a battery chargers or when used with Z cameras, it can be charged in-camera using the EH-7P

Charging AC Adapter. The charger and AC adapter are sold separately.

Dual USB-C Charger with LCD Display for Nikon EN-EL15 Battery With the Dual USB-C Charger, you can make sure you are always ready with your spare Nikon EN-EL15 batteries. This dual USB-C charger features a high-definition LCD display that shows your current battery status. It features 5V Type-C and USB input ports and https://www.nikonusa.com/p/z-6ii/1659/overview https://www.google.com/search?ibp=oshop&prds=pvt:hg,pvo:29,mid:576462677572950729,imageDocid:7793932264394689132,gpcid:5540625528134526899,headlineOfferDocid:4223321993539037082,catalogid:3126058438181057875,productDocid:299496978833228184,rds:PC_5540625528134526899%7CPROD_PC_5540625528134526899&q=product&sa=X&ved=2ahUKEwjfioeO372TAxV-TTABHbYwBIsQxa4PegYIAQgDEAI can charge two batteries simultaneously. All items meet or exceed OEM standards.

Bundle Includes:

• Nikon EN-EL15c Rechargeable Li-ion Battery (2-Pack)

• Dual USB-C Charger with LCD Display for Nikon EN-EL15 Battery

3.4. Sandisk Extreme Pro 200MB/S SDXC Memory Card 128GB

Transfer Speeds

Up to 200MB/s(1)(2)[64GB-1TB](2)

Performance

Allows for high-speed offloads that minimize downtime

Shot Speeds

Shot Speeds up to 140MB/s(1)[256GB-1TB]

Card Compatibility

Ideal for SANDISK SD and microSD cards with SANDISK QuickFlow Technology

Video Quality

4K UHD video(3)

Design

Premium aluminum enclosure helps keep cards cool to prevent overheating

Speed Class

Class 10, V30, and U3(4)

Connectivity

USB-C (5Gbps) port provides super-fast media transfers

Durability

Temperature, water, shock, humidity, wear out, drop, X-ray, and magnet proof(5)

Security

Write-protect lock switch helps protect from overwriting

3.5. GoDox MF-R76N TTL Macro Ring Flash for Nikon

Key Specifications & Features

• TTL & HSS Support: Unlike the manual-only version, this model supports i-TTL for Nikon, allowing the camera to automatically calculate exposure. It also supports High-Speed Sync (HSS), which is crucial for shooting with wide apertures in bright light.

• Twin-Tube Control: The ring is split into two halves (A and B). You can adjust their power ratios independently to create shadows and depth, avoiding the "flat" look common with basic ring flashes.

• Wireless Integration: It includes a built-in 2.4G Godox X-System receiver. It can be triggered by or act as a transmitter for other Godox lights (like the V1 or AD200).

• Focus Assist: It features two built-in focus-assist lamps with 10 levels of brightness to help your camera lock focus in dark macro environments.

• Battery Power: It uses a dedicated 7.2V/2600mAh lithium battery (the same as the Godox V1/V860III), providing a fast

1.5s recycle time and 660 full-power pops.

• Lens Compatibility: It comes with 8 adapter rings (49mm to 77mm), making it compatible with almost any macro lens, including the Nikkor Z 105mm f/2.8 VR S or the Z 24-120mm f/4 S you were looking at.

3.6. LingoFoto 6pcs round full color lens filter set size 77mm (red/orange/yellow/green/blue/purple) w/ pouch

This 77mm full-color filter set includes red, orange, yellow, green, blue, and purple filters with a double-threaded, stackable design for creative landscape and portrait photography. The kit also includes a lens cleaning pen, microfiber cloth, tissue, and a pouch, compatible with lenses featuring a 77mm filter thread

3.7. Kaiser RS-1 Copy Stand Kit with 40" Counterbalanced Column, RA-1 Arm and 18x20" Grid Baseboard

With the RS-1 Copy Stand Kit, you'll experience a blend of durability, versatility, and professional-grade functionality. This robust system is specifically engineered to accommodate large, heavy cameras, providing the stability and precision necessary for flawless results. Its design minimizes vibration, an essential feature for achieving perfect image reproduction.

The RS-1 features a precise height adjustment system, counterbalanced by an integrated coil spring, making it ideal for heavy-duty tasks. The 40" column, constructed from a special wide aluminum tube, is finished in a matte black anodized finish, reducing glare and reflections. It includes both centimeter and inch scales, and a hand crank for easy height adjustment.

The 18x20" grid baseboard, also finished in a glare-free matte black, is marked with a clear grid for easy positioning of your work. It includes a fitted mount for attaching the column to the RA-1 Repro Arm, and an integrated spirit level ensures accurate alignment. The baseboard's feet can be individually adjusted in height, providing additional stability and flexibility.

The RA-1 Repro Arm, a key component of the RS-1 Stand, guarantees secure camera fastening and precise alignment. It can accommodate any camera system, thanks to an easily interchangeable camera screw that can switch between 1/4" and 3/8". The RA-1

Repro Arm also features four centering holes for precise adjustment of optional repro bellows and a graduated stage, ensuring parallel mounting at all times.

Whether you're working with 35mm or medium format cameras, the RS-1 Copy Stand Kit adapts effortlessly. The adjustment device allows for quick changes, positioning the camera so that its bottom is level for 35mm, or using the device as a stop for the side of medium format camera bodies. This adaptability makes the RS-1 an invaluable tool for any professional photographer or studio.

Kaiser RS-1 Features

• For Professional Users and Dedicated Photographers.

• High stability, angular precision and quality workmanship

• Ideal for use with camera systems up to 4 kg/8.8 lbs. total weight.

• Glare-free Non-reflecting Matt Black base plate

• Baseboard with grid

• Individually Height-adjustable Feet

• Precision Column Base with built-in Spirit Level

• Friction Driven Hand Crank for Height Adjustment

• Specially Wide (2.7") Low-vibration Column

• Matt Black Anodized Aluminum Tubing with cm & inch Scales

• Vast range of components and accessories.

• Units can be adapted to individual requirements.

• Lighting units with various lamps and reflectors, working at different power levels, with various mounting and adjustment options.

• This system optimized for adaptability is completely modularized and therefore allows also customized configurations.

4. Price Proposal

Line Item Description Quantity Unit of

Measure

Unit Cost Total

1 Nikon Z6 II Mirrorless Camera w/

Nikkor Z 24-120mm f/4 S Lens

2 each

2 Nikon EN-EL15C Rechargeable Li-Ion

Battery 2-Pack bundle w/ USB-C

Charger and digital display

2 each

3 Sandisk Extreme Pro 200MB/S SDXC

Memory Card 128GB

4 each

4 GoDox MF-R76N TTL Macro Ring Flash for Nikon

2 each

5 LingoFoto 6pcs round full color lens filter set size 77mm

(red/orange/yellow/green/blue/purple) w/ pouch

2 each

6 Kaiser RS-1 Copy Stand Kit with 40"

Counterbalanced Column, RA-1 Arm and 18x20" Grid Baseboard

1 each

TOTAL

5. Vendor Questionnaire

1. Authorized Representative’s Information*

Please include the following information regarding your Authorized Representative:

• Name

• Title

• Mailing Address

• Telephone Number

• Email Address

*Response required

2. Business License*

Is your business licensed (unless exempt by applicable law), permitted and certified to do business in the State of Florida?

☐ Yes

☐ No

*Response required

When equals "Yes"

2.1. License Number*

Enter your Florida Business License Number here.

*Response required

3. Public Record Declaration or Claim of Exemption*

As a Bidder, any document you submit to the City of Tampa may be public record and be open for personal inspection or copying by any person. In Florida “public records” are defined as all documents, papers, letters, maps, books, tapes, photographs, films, sound recordings, data processing software, or other material, regardless of the physical form, characteristics, or means of transmission, made, or received pursuant to law or ordinance or in connection with the transaction of official business by any agency. Section

119.011(11), F.S. A document is subject to personal inspection and copying unless it falls under one of the public records exemptions created under Florida law.

Do you claim any exemptions from the public records laws?

☐ Yes

☐ No

*Response required

When equals "Yes"

3.1. Exemption form Public Records Law and Agreement to Indemnify and Defend the City of Tampa*

Upload a redacted copy of your submittal. Include statutory citations for applicable exemptions under the law.

By claiming that parts of the bid are exempt from the public records law, and uploading a redacted copy, the Bidder agrees to protect, defend, indemnify, and hold the City of Tampa, its officers, employees, and agents free and harmless from and against any and all claims arising out of a request to inspect or copy the bid. The Bidder agrees to investigate, handle respond to, provide defense (including payment of attorney fees, court costs, and expert witness fees and expenses up to and including any appeal) for and defend any such claim at its sole cost and expense through counsel chosen by the City of Tampa and agrees to bear all other costs and expenses related thereto, even if they (claims, etc.) are groundless, false, or fraudulent.

*Response required features