NB688000-25-01568 Requirements and Specifications.pdf

Requirements / Specifications: Narrow Linewidth 1112 nm Laser 1 Version 1.0 (2019) Double-click on for further assistance.

Use this document to detail specifications/requirements for an item and/or ancillary services.

TITLE: Narrow Linewidth 1112 nm Laser Requesting Lab/Division/Group: Physical Measurements Lab/Time and Frequency Division/Atomic Devices and Instrumentation Group

NB688000-25-01568

General Statement of Need The Physical Measurements Lab/Time and Frequency Division/Atomic Devices and Instrumentation Group at NIST requires a narrow linewidth 1112 nm laser system. The laser must be able to tune to 1111.6 nm to hit the transition in Yb 555.8nm. The laser must output at least 5mW at the operating wavelength and have a linewidth of < 3kHz in a 0.12 ms integrated bandwidth.

Items and/or Ancillary Services

Item 1: Narrow Linewidth 1112 nm Seed Laser Quantity: 1 Specifications:

1. Center wavelength:1111.60nm

2. Linewidth(120us integration):<3 kHz

3. Output power: > 5 mW, continuous

4. Min thermal tuning +/-240 pm.

5. Fast wavelength tuning range: >5GHz range @ 200 Hz

6. Fast wavelength tuning range: > 0.5 GHz range @ 1 kHz

7. External analog input for fast wavelength modulation.

8. Frequency noise <1.1 kHz^2/Hz @ 20 kHz

< 35 kHz^2/Hz @ 1 kHz < 1.1 MHz^2/Hz @ 100 Hz < 110 MHz^2/Hz @ 10 Hz

9. Output: PM980 fiber, FC/APC coupler

10. Output polarization: linear, >22dB exctinction

11. Output beam quality M^2< 1.1.

12. Includes hardware for mounting in 19” electronics rack Electrical Specifications:

1. 120 VAC, 60 Hz.

2. Includes control interface and software to operate laser.

3. USB and ethernet control connectivity

Separately Priced Options and Services:

Item 2: [List minimum specifications.

Quantity: [Enter quantity here.] Specifications: [Enter quantity here.]

Requirements / Specifications: Narrow Linewidth 1112 nm Laser 2

[List any other item(s) or service requirements here using the same format above.]

Service Requirements / Item Specifications Section Requirements/Specifications Planning Considerations ☒ N/A

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain requirement here]

☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote]

Shipping & Delivery ☐ N/A

[Enter shipping and delivery information by item here.] Shipping criteria:

☐ Partial delivery acceptable ☐ Direct delivery to building required

[Explain need for requirement here] Building has: ☐ Loading dock

☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here]

Delivery date criteria:

☒ Delivery of goods, installation, and training shall be completed no later than:

10 weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements]

Electronic Media ☐ N/A

[Enter electronic media requirements by item here.] ☒ Software ☐ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here]

Installation ☒ N/A

[Enter installation requirements by item here.] ☐ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☐ Equipment set up ☐ Start-up services ☐ Turn key installation ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point.

Facility / Utility Considerations ☒ N/A

[List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s)

[List any Work Order Number(s) here]

Requirements / Specifications: Narrow Linewidth 1112 nm Laser 3

☐ Power available Voltage: [Enter voltage here] (V) Max Current: [Enter max current draw here] (A) Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P) Environment: [Choose environment] Other power consideration: [List any other power considerations here]

☐ Utility connections: [List relevant available utilities, pressure(s), and flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote]

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included?

☐ Labor ☐ Parts ☐ Travel ☐ Cost and liability for returns ☐ Other: [Enter other requirements here] ☐ Warranty length: [Enter warranty length here] Period Length:[Ex. month, 6 month, year etc.]

Training ☒ N/A

[Training requirements (who, when, what, where) here. If on-site, is travel necessary?] ☐ On-site ☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training:

☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety ☐ Other: [Enter other scope requirements here]

☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point.

Inspection and Acceptance ☐ N/A

[Enter inspection requirements per item here] ☒ Planned government acceptance testing (7 business days) ☐ Gov’t acceptance expected to take longer than 7 business days: [Duration] ☒ Inspection and acceptance plan: We will test the laser operating power output, wavelength, and linewidth.

☐ Other: [Enter other requirements here]

Maintenance [Describe your maintenance requirements per item here] Period Length: [Ex. month, 6 month, year etc.]

Requirements / Specifications: Narrow Linewidth 1112 nm Laser 4

☒ N/A What is included?

☐ Labor ☐ Spare parts ☐ Consumables ☐ Travel ☐ Cost and liability for returns ☐ Software updates ☐ Manuals ☐ Service plan length: [Enter service plan length here]

☐ Other: [Enter other requirements here] ☐ Requirements: [Enter requirements here] (i.e.: onsite within 72 hours, etc.)

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

[List any government furnished material/equipment per item here] ☐ Samples for testing ☐ Government equipment which will leave gov't site (TPOC must coordinate with division property custodian)

Serial Number: [Enter Serial Number here] Description: [Enter description here] NIST property number: [Enter NIST property number here]

☐ Other: [Enter other details here] Travel ☒ N/A

[Describe any travel requirements per item here] ☐ Explain: [Explain here] ☐ Other: [Enter other requirements here] Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.). Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Provide suggestions to improve this form by clicking here.

https://oaam.nist.gov/OAAMAcquisitions/FormFeedback/default.aspx