NB688000-25-00807 Requirements and Specifications.pdf

Requirements / Specifications: [Enter Title here] 1 Version 1.0 (2019) Double-click on for further assistance.

Use this document to detail specifications/requirements for an item and/or ancillary services.

TITLE: Multi-channel RF Synthesizer Requesting Lab/Division/Group: Molecules, Division 688, Ion Storage Group

General Statement of Need We require a multi-channel RF synthesizer with low phase noise, and phase-coherent and independent channels.

Items and/or Ancillary Services

Item 1: 4-channel phase coherent synthesizer with accessories Quantity: 1 Specifications:

1. 4 independent channels: 3 channels output frequency range 10 MHz – 1 GHz, 1 channel output frequency range 10 ReivMHz- 4 GHz

2. All channels with calibrated output power from -50 dBm to +18 dBm, with <+0.5 dB accuracy and 0.01 dB resolution

3. VSWR(S22) from 10 MHz to 2 GHz is -17 dB and from 2 GHz to 4 GHz is -13 dB

4. Low SSB (single sideband) Phase Noise: <= -126 dBc/Hz for a 1 GHz signal at 10 kHz offset

5. Low harmonics: for 100 MHz to 1.024 GHz, -36 dBc for 2nd harmonic and -50 dBc for 3rd harmonic; for >1.024 GHz to 4 GHz, -32 dBc for 2nd harmonic and -42 dBc for 3rd harmonics

6. Low sub-harmonics: for 10 MHz to 1.024 GHz, -69 for ½ harmonic and -64 dBc for 3/2 harmonic; for >1.024 GHz to 4 GHz, -54 dBc for ½ harmonic and -45 dBc for 3/2 harmonic

7. All channels are phase-coherent with one another

8. 4 channels each with a dedicated external modulation input for adjusting either phase, frequency, amplitude, or pulsing the channel on and off

9. The frequencies of output channgles can be internally referenced or externally referenced with a 10/100 MHz signal

10. Communication using USB, Ehternet (including GUI), RS-232 and GPIB (with programming commands) interfaces with a computer

11. 1U rack mount

Separately Priced Options and Services:

Item 2: [List minimum specifications.

Quantity: [Enter quantity here.] Specifications: [Enter quantity here.]

[List any other item(s) or service requirements here using the same format above.]

Service Requirements / Item Specifications Section Requirements/Specifications Planning Considerations

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain requirement here]

Requirements / Specifications: [Enter Title here] 2

☒ N/A ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote]

Shipping & Delivery ☐ N/A

[Enter shipping and delivery information by item here.] Shipping criteria:

☐ Partial delivery acceptable ☐ Direct delivery to building required

[Explain need for requirement here] Building has: ☐ Loading dock

☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here]

Delivery date criteria:

☒ Delivery of goods, installation, and training shall be completed no later than:

10 weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements]

Electronic Media ☒ N/A

[Enter electronic media requirements by item here.] ☐ Software ☐ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here]

Installation ☒ N/A

[Enter installation requirements by item here.] ☐ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☐ Equipment set up ☐ Start-up services ☐ Turn key installation ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point.

Facility / Utility Considerations ☒ N/A

[List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s)

[List any Work Order Number(s) here] ☐ Power available

Voltage: [Enter voltage here] (V) Max Current: [Enter max current draw here] (A) Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P) Environment: [Choose environment] Other power consideration: [List any other power considerations here]

☐ Utility connections: [List relevant available utilities, pressure(s), and

Requirements / Specifications: [Enter Title here] 3 flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote]

Warranty ☒ N/A

[Choose warranty type here.] [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included?

☐ Labor ☐ Parts ☐ Travel ☐ Cost and liability for returns ☐ Other: [Enter other requirements here] ☐ Warranty length: [Enter warranty length here] Period Length:[Ex. month, 6 month, year etc.]

Training ☒ N/A

[Training requirements (who, when, what, where) here. If on-site, is travel necessary?] ☐ On-site ☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training:

☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety ☐ Other: [Enter other scope requirements here]

☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point.

Inspection and Acceptance ☐ N/A

[Enter inspection requirements per item here] ☒ Planned government acceptance testing (7 business days) ☐ Gov’t acceptance expected to take longer than 7 business days: [Duration] ☐ Inspection and acceptance plan: [Explain here] ☐ Other: [Enter other requirements here]

Maintenance ☒ N/A

[Describe your maintenance requirements per item here] Period Length: [Ex. month, 6 month, year etc.] What is included?

☐ Labor ☐ Spare parts ☐ Consumables ☐ Travel ☐ Cost and liability for returns ☐ Software updates ☐ Manuals ☐ Service plan length: [Enter service plan length here]

☐ Other: [Enter other requirements here] ☐ Requirements: [Enter requirements here] (i.e.: onsite within 72 hours, etc.)

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished

[List any government furnished material/equipment per item here] ☐ Samples for testing

Requirements / Specifications: [Enter Title here] 4

Material / Equipment ☒ N/A

☐ Government equipment which will leave gov't site (TPOC must coordinate with division property custodian) Serial Number: [Enter Serial Number here] Description: [Enter description here] NIST property number: [Enter NIST property number here] ☐ Other: [Enter other details here]

Travel ☒ N/A

[Describe any travel requirements per item here] ☐ Explain: [Explain here] ☐ Other: [Enter other requirements here] Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.). Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Provide suggestions to improve this form by clicking here.

https://oaam.nist.gov/OAAMAcquisitions/FormFeedback/default.aspx