Specifications.pdf

S

Statement of Work: Module upgrades for qubit control and measurement 1 Last Saved: 7/14/2026 2:59 PM Double-click on for further assistance.

Use this Statement of Work document to purchase an item and/or item-related services.

TITLE: Module upgrades for qubit control and measurement Requesting Lab/Division/Group: PML, Applied Physics Division, Group 5 Requisition Number: [to be entered by PR preparer]

Statement of Need The Advanced Microwave Photonics Group performs highly sensitive experiments using high speed modulation of microwave fields to control and measure superconducting quantum circuits at cryogenic temperatures. At present, we own, operate and program, with existing Qblox software, several microwave module instruments with three Qblox chassis. We need the ability to perform fast control and measurements with fully independent ports with a continuous output frequency range from 100 MHz to 10 GHz, without the need for external mixers and other components. The input ports need > 800 MHz of bandwidth. We need calibration-free operation and automatic signal path optimization with synchronized ports and fast feedback across the entire stack. We need equipment that can interface with existing hardware, in the existing hardware chassis, that is easily programmable with current control software. We need 12 more output channels and 4 more input channels. There are new upgraded Qblox microwave modules, each available with 6 output (from 100 MHz to 10 GHz) and 2 input channels with channel-independent instantaneous bandwidth of >800 MHz. We need two units with a combined 12 output channels and combined 4 input channels and the ability to interface with multiple qubits at once.

Items and/or item-related services Section Requirements Related Information Items/Service (required)

Qblox QRC Module – 6 output channels and 2 input channels with an output frequency range from 100 MHz to 10 GHz and an input bandwidth > 800 MHz.

☒ See attached document for detailed specifications

Enter related information here

Shipping & Delivery ☐ N/A

Delivery information by item ☒ Phased delivery is acceptable ☐ Software on USB / disk required ☒ Software electronic delivery acceptable Email address for software delivery

Enter related information here

Installation ☒ N/A

Installation requirements ☐ Site visit recommended

Inspection and Acceptance ☐ N/A

Installation and testing will require an estimated duration of 3 weeks ☒ Government acceptance expected to take longer than 7 days

Warranty Base Manufacturer Warranty is acceptable Enter related information here

S

Statement of Work: Module upgrades for qubit control and measurement 2 Last Saved: 7/14/2026 2:59 PM Double-click on for further assistance.

☐ N/A If you require an Extended Manufacturer Warranty, describe the warranty requirements.

Period Length:24 month ☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Training ☒ N/A

Training requirements Enter related information here

Maintenance

☒ N/A

Describe your maintenance requirements.

☐See attached document for detailed maintenance specifications Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Repair ☒ N/A

Choose an item.

Describe your repair requirements.

Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

List any government furnished material/equipment here

Enter related information here

Travel ☒ N/A

Describe any travel requirements Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.).

Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Statement of Need