NB6720602400981 - IDIQ RFQ AWG.pdf
PDF 419 KB Posted
- Attached to
- RF Arbitrary Waveform Generator
- Solicitation number
- NB6720602400981
About this file
This document is a Request for Quotation (RFQ) for Radio Frequency (RF) Arbitrary Waveform Generators. The RFQ is being conducted as a 100% Total Small Business set-aside under simplified acquisition procedures. The Government intends to award a single Firm Fixed Price Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract with a minimum quantity of 1 and a maximum of 9 units. The RFQ specifies the required technical capabilities and quantity estimates for base and option years. Pricing will be evaluated for reasonableness using a Lowest Price Technically Acceptable (LPTA) approach. Quotes are due by the date and time specified, and should be submitted electronically to the Contracting Officer. The successful contractor must maintain an active System for Award Management (SAM) registration and complete required representations and certifications. Delivery is FOB Destination to the specified location.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1-Specifications.pdf | ||
| Attachment 2 - IDIQ Ordering Procedures.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED
IN ACCORDANCE WITH THE FORMAT IN SUBPART 12.6, AS SUPPLEMENTED WITH
ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT
CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED AND
A WRITTEN SOLICITATION WILL NOT BE ISSUED.
Solicitation number NB672060-24-00981 is a Request for Quotation (RFQ) conducted under the authority of 13.5, Simplified Procedures for Certain Commercial Products and Commercial Services.
I. This RFQ, incorporated provisions, and clauses are those in effect through the Federal Acquisition Circular (FAC) 2024-03. The associated NAICS is 334516. This requirement is solicited as a 100% Total Small Business set-aside.
The Government intends to issue a single award Firm Fixed Priced Indefinite-Delivery/Indefinite- Quantity (IDIQ) contract as the result of this solicitation. The IDIQ minimum quantity will be 1 and the maximum quantity will be 9. The quantities below are estimated amounts based on the Government’s anticipated needs.
II. Attached are the Specifications describing the requirements for Radio Frequency (RF) Arbitrary Waveform Generator for the following line-item number(s) (CLINs) to include a description of the item(s), quantities, and units of measure.
Item Number Supplies/Services Description QTY Unit of
Issue Unit Price
Amount
0001 RF Arbitrary Waveform Generator, in accordance with the specifications.
Base Year
3 est. EA $ $
1001 RF Arbitrary Waveform Generator, in accordance with the specifications.
Option Year 1
3 est. EA $ $
2001 RF Arbitrary Waveform Generator, in accordance with the specifications.
Option Year 2
3 est. EA $ $
Total Value: $
Date(s) and place(s) of delivery and acceptance and FOB point are required in accordance with the attached Specifications document.
III. The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023), applies to this acquisition. Addenda to this provision is as follows:
Submit the quotation on company letterhead to the email address stated herein by the date and time provided. The quotation shall include clear, concise, technical capability of the items offered to meet the Government requirement identified in the Specifications document. The Basis of Award is Lowest Price Technically Acceptable (LPTA).
http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/12.htm#P298_49781
1. Technical capability documentation which may include a narrative, charts, graphs, tables, drawings, product / service literature, and demonstrated authority to provide the necessary items and perform the required services identified in the specifications. The documentation shall clearly describe, in sufficient detail, the vendor's authority, proposed items, resources and methods to successfully fulfill the requirements including specifications, performance capability requirements, delivery schedules, warranties and all service requirements per this Request for Quotations.
2. The pricing shall conform to the technical requirements, and a firm fixed price shall be provided for each line item. The Buy American Statute applies and price preference for domestic items over $10,000 applies.
IV. The provision at FAR 52.212-2, Evaluation -- Commercial Products and Commercial Services (Nov 2021), applies to this acquisition. The Government will award a single award firm-fixed-price IDIQ contract. The basis of the Award is Best Value in accordance with 13.106-1(2)(ii) based on the below factors while utilizing the Lowest Price Technically Acceptable (LPTA) evaluation method. The Government will evaluate the lowest price quotation first, and then stop when the Government has identified the lowest price quotation that is technically acceptable.
The following factors shall be used to evaluate the quotation:
1. Technical capability of the item(s) offered to meet the Government requirement.
2. Price
Basis of Evaluation:
1. Technical capability of the item(s) offered to meet the Government requirement.
a. Evaluation of this factor is a subjective evaluation of the vendor’s demonstrated resources, capability, and methods to meet all requirements. The vendor’s submittals will be evaluated in terms of demonstrated understanding of the requirements and demonstrated capability to meet or exceed the requirements. This may include the authority to provide the required items (i.e., authorized dealer/seller/reseller), authority to provide maintenance and repair services, and the capability and method to successfully meet all the requirements, including but not limited to item specifications, delivery schedule, installation, warranty, etcetera. This factor will be evaluated on an acceptable/unacceptable basis. Vendors who do not receive an acceptable rating will not be evaluated further.
b. If the quotation is missing any of the elements, the quotation may be deemed unacceptable and may not be evaluated further.
2. Price will be evaluated for reasonableness. The Government will not conduct price realism as a part of price evaluation.
Offerors shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Products and Commercial Services (Feb 2024), with its offer. The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) accessed http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1612_228754 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1626_230606 through http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.
The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items Commercial Products and Commercial Services (Nov 2023), applies to this acquisition.
The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders -- Commercial Products and Commercial Services (Feb 2024), applies to this acquisition and the following additional FAR clauses cited are applicable to the acquisition:
52.203-6, Restrictions on Subcontractor Sales to the Government 52.203-17, Contractor Employee Whistleblower Rights 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards 52.204-13, System for Award Management Maintenance 52.204-27, Prohibition on a ByteDance Covered Application 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (U.S.C.644) 52.219-8, Utilization of Small Business Concerns 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor – Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.222-50, Combating Trafficking in Persons 52.222-54, Employment Eligibility Verification 52.223-18, Contractor Policy to Ban Text Messaging While Driving 52.225-5, Trade Agreements 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds Transfer
The following additional contract requirement(s) and additional terms and conditions are necessary for this acquisition and consistent with customary commercial practices are as follows:
V. Additional Contract Requirements:
• All communications and documents must include solicitation #NB672060-24-00981.
• All quotations shall include the following information:
o Information enough to demonstrate you can meet or exceed the requirements in the
Specifications.
o Firm fixed price quote.
http://www.sam.gov/portal o Payment Terms: Net 30.
o Please indicate the soonest you can deliver.
o FOB Destination including delivery cost for delivery to:
DOC - NIST
325 Broadway Boulder, CO 80305 o Delivery point of contact will be provided upon award. (NIST reserves the right to ship using the NIST Account).
o Company SAM Unique Entity ID. In order to be eligible for this award, the offeror must have and maintain an active registration at the System for Award Management at www.sam.gov and have completed Representations and Certifications therein for the specified NAICS code or submit separate Representations and Certifications if the specified NAICS code is not listed in their SAM registration.
o Acceptance is expected to not exceed 7 days after the items are received.
o Buy American Act applies and a price preference for domestic products over $10K will apply. If item(s) are manufactured outside the United States, provide the country of origin/manufacture in the quote.
VI. Additional Terms and Conditions:
Provisions – FAR 52.204-7, System for Award Management FAR 52.204-16, Commercial and Government Entity Code Reporting
FAR 52.204-24 – Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services . The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.
(a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to— http://www.sam.gov/
(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or
(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—
(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or
(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".
(d) Representation. The Offeror represents that—
(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.
The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and
(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—
It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.
(e) Disclosures.
(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:
(i) For covered equipment—
(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);
(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and
(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.
(ii) For covered services—
(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or
(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this
(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:
(i) For covered equipment—
(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);
(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and
(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this
(ii) For covered services—
(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or
(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this
(End of provision)
FAR 52.209-7 Information Regarding Responsibility Matters
(a) Definitions. As used in this provision—
Administrative proceeding means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceedings at the Federal and State level but only in connection with performance of a federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables.
Federal contracts and grants with total value greater than $10,000,000 means—
(1) The total value of all current, active contracts and grants, including all priced options; and
(2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules).
Principal means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).
(b) The offeror □ has □ does not have current active Federal contracts and grants with total value greater than $10,000,000.
(c) If the offeror checked "has" in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:
(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions:
(i) In a criminal proceeding, a conviction.
(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.
(iii) In an administrative proceeding, a finding of fault and liability that results in–
(A) The payment of a monetary fine or penalty of $5,000 or more; or
(B) The payment of a reimbursement, restitution, or damages in excess of $100,000.
(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.
(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.
(d) The offeror shall post the information in paragraphs (c)(1)(i) through (c)(1)(iv) of this provision in FAPIIS as required through maintaining an active registration in the System for Award Management, which can be accessed via https://www.sam.gov (see 52.204-7).
FAR 52.217-5 Evaluation of Options Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).
FAR 52.225-2 – Buy American Certificate
(a)
(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.
(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.
(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).
(b) Foreign End Products:
(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."
Line Item No. Country of Origin Exceeds 55% domestic content (yes/no) https://www.acquisition.gov/far/25.105#FAR_25_105
[List as necessary]
(c) Domestic end products containing a critical component:
Line Item No. ___
[List as necessary]
(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.
(End of provision)
52.225-6 Trade Agreements Certificate
(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."
(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.
Other End Products:
Line Item No. Country of Origin
[List as necessary]
(c) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.
FAR 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation
a) Definitions. As used in this provision— Foreign person means any person other than a United States person.
Specified Federal procurement payment means any payment made pursuant to a contract with a foreign contracting party that is for goods, manufactured or produced, or services provided in a foreign country that is not a party to an international procurement agreement with the United States. For purposes of the prior sentence, a foreign country does not include an outlying area.
United States person as defined in 26 U.S.C. 7701(a)(30) means.
(1) A citizen or resident of the United States;
https://www.acquisition.gov/far/part-25#FAR_Part_25
(2) A domestic partnership;
(3) A domestic corporation;
(4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 701(a)(31)); and
(5) Any trust if–
(i) A court within the United States is able to exercise primary supervision over the administration of the trust; and
(ii) One or more United States persons have the authority to control all substantial decisions of the trust.
(b) Unless exempted, there is a 2 percent tax of the amount of a specified Federal procurement payment on any foreign person receiving such payment. See 26 U.S.C. 5000C and its implementing regulations at 26 CFR 1.5000C-1 through 1.5000C-7.
(c) Exemptions from withholding under this provision are described at 26 CFR 1.5000C-1(d)(5) through (7). The Offeror would claim an exemption from the withholding by using the Department of the Treasury Internal Revenue Service Form W-14, Certificate of Foreign Contracting Party Receiving Federal Procurement Payments, available via the internet at www.irs.gov/w14. Any exemption claimed and self-certified on the IRS Form W-14 is subject to audit by the IRS. Any disputes regarding the imposition and collection of the 26 U.S.C. 5000C tax are adjudicated by the IRS as the 26 U.S.C. 5000C tax is a tax matter, not a contract issue. The IRS Form W-14 is provided to the acquiring agency rather than to the IRS.
(d) For purposes of withholding under 26 U.S.C. 5000C, the Offeror represents that
(1) It [_] is [_] is not a foreign person; and
(2) If the Offeror indicates "is" in paragraph (d)(1) of this provision, then the Offeror represents that— I am claiming on the IRS Form W-14 [__] a full exemption, or [__] partial or no exemption [Offeror shall select one] from the excise tax.
(e) If the Offeror represents it is a foreign person in paragraph (d)(1) of this provision, then—
(1) The clause at FAR 52.229-12, Tax on Certain Foreign Procurements, will be included in any resulting contract; and
(2) The Offeror shall submit with its offer the IRS Form W-14. If the IRS Form W-14 is not submitted with the offer, exemptions will not be applied to any resulting contract and the Government will withhold a full 2 percent of each payment.
(f) If the Offeror selects "is" in paragraph (d)(1) and "partial or no exemption" in paragraph (d)(2) of this provision, the Offeror will be subject to withholding in accordance with the clause at FAR 52.229-12, Tax on Certain Foreign Procurements, in any resulting contract.
(g) A taxpayer may, for a fee, seek advice from the Internal Revenue Service (IRS) as to the proper tax treatment of a transaction. This is called a private letter ruling. Also, the IRS may publish a revenue ruling, which is an official interpretation by the IRS of the Internal Revenue Code, related statutes, tax treaties, and regulations. A revenue ruling is the conclusion of the IRS on how the law is applied to a specific set of facts. For questions relating to the interpretation of the IRS regulations go to https://www.irs.gov/help/tax-law-questions.
FAR 52.252-1 Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The quoter is cautioned that the listed provisions may include blocks that must be completed by the quoter and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the quoter may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): at http://acquisition.gov/comp/far/index.html (End of provision) http://acquisition.gov/comp/far/index.html
CAR 1352.233-70, Agency Protests CAR 1352.233-71, GAO and Court of Federal Claims Protests
CAR 1352.239-71 Electronic and Information Technology
(a) To be considered eligible for the award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility standards at 36 CFR 1194 designated below:
_ XX_ 1194.21 Software applications and operating systems
______ 1194.22 Web-based intranet and internet information and applications
______ 1194.23 Telecommunications products
______ 1194.24 Video and multimedia products
______ 1194.25 Self-contained, closed products
______ 1194.26 Desktop and portable computers
______ 1194.31 Functional performance criteria
______ 1194.41 Information, documentation and support
(b) The standards do not require the installation of specific accessibility-related software or the attachment of an assistive technology device, but merely require that the EIT be compatible with such software and devices so that it can be made accessible if so required by the agency in the future.
(c) Alternatively, offerors may propose products and services that provide equivalent facilitation. Such offers will be considered to have met the provisions of the Access Board standards for the feature or components providing equivalent facilitation. If none of the offers that meet all applicable provisions of the standards could be accepted without imposing an undue burden on the agency or component, or if none of the offerors propose products or services that fully meet all of the applicable Access Board's provisions, those offerors whose products or services meet some of the applicable provisions will be considered eligible for award. Awards will not be made to an offeror meeting all or some of the applicable Access Board provisions if award would impose an undue burden upon the agency.
(d) Offerors must submit representation information concerning their products by completing the VPAT template at http://www.Section508.gov.
(End of provision)
Clauses – FAR 52.204-18, Commercial and Government Entity Code Maintenance FAR 52.204-21, Basic Safeguarding of Covered Contractor Information Systems
FAR 52.216-18 Ordering
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from the Date of Award through +365 days.
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of a conflict between a delivery order or task order and this contract, the contract shall control.
(c) A delivery order or task order is considered "issued" when—
(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;
(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or
(3) If sent electronically, the Government either—
(i) Posts a copy of the delivery order or task order to a government document access system, and notice is sent to the Contractor; or
(ii) Distribute the delivery order or task order via email to the Contractor's email address.
(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.
(End of clause)
FAR 52.216-19 Order Limitations
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 1 unit, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) Maximum order. The Contractor is not obligated to honor-
(1) Any order for a single item in excess of 3 units;
(2) Any order for a combination of items in excess of 9 units; or
(3) A series of orders from the same ordering office within 365 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section
(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph
(b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.
(End of clause)
FAR 52.216-22 Indefinite Quantity
(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.
(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."
(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor’s and Government’s rights and obligations with respect to that order to the same extent as if the order were completed during the contract’s effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after the last day of the exercised option+364 days.
(End of clause)
FAR 52.217-9 Option to Extend the Term of the Contract
(a) The Government may extend the term of this contract by written notice to the Contractor within 10 days of contract expiration date provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.
(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years.
(End of clause)
FAR 52.247-34 FOB Destination The term "f.o.b. destination," as used in this clause, means-- (1) Free of expense to the Government, on board the carrier`s conveyance, at a specified delivery point where the consignee`s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and (2) Supplies shall be delivered to the destination consignee`s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee. (b) The Contractor shall-- (1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements; (2) Prepare and distribute commercial bills of lading; (3) Deliver the shipment in good order and condition to the point of delivery specified in the contract; (4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract; (5) Furnish a delivery schedule and designate the mode of delivering carrier; and (6) Pay and bear all charges to the specified point of delivery.
(End of Clause)
52.247-48 FOB Destination-Evidence of Shipment
(a) If this contract is awarded on a free on-board (f.o.b.) destination basis, the Contractor-
(1) SHALL NOT SUBMIT AN INVOICE FOR PAYMENT UNTIL THE SUPPLIES COVERED
BY THE INVOICE HAVE BEEN SHIPPED TO THE DESTINATION; and
(2) Shall retain, and make available to the Government for review as necessary, the following evidence of shipment documentation for a period of 3 years after final payment under the contract:
(i) If transportation is accomplished by common carrier, a signed copy of the commercial bill of lading for the supplies covered by the Contractor’s invoice, indicating the carrier’s intent to ship the supplies to the destination specified in the contract.
(ii) If transportation is accomplished by parcel post, a copy of the certificate of mailing.
(iii) If transportation is accomplished by other than common carrier or parcel post, a copy of the delivery document showing receipt at the destination specified in the contract.
(b) The Contractor is not required to submit evidence of shipment documentation with its invoice. (End of clause)
FAR 52.252-2 Clauses Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): at http://acquisition.gov/comp/far/index.html
(End of Clause)
CAR 1352.201-70, Contracting Officer’s Authority CAR 1352.209-73, Compliance with the Laws CAR 1352.209-74, Organizational Conflict of Interest
CAR 1352.201-72 Contracting Officer's Representative (COR)
(a) _(Will be identified at time of award)_ is hereby designated as the Contracting Officer's Representative (COR). The COR may be changed at any time by the Government without prior notice to the contractor by a unilateral modification to the contract. The COR is located at:
Phone Number:
E-mail:
(b) The responsibilities and limitations of the COR are as follows:
http://acquisition.gov/comp/far/index.html
(1) The COR is responsible for the technical aspects of the contract and serves as technical liaison with the contractor. The COR is also responsible for the final inspection and acceptance of all deliverables and such other responsibilities as may be specified in the contract.
(2) The COR is not authorized to make any commitments or otherwise obligate the Government or authorize any changes which affect the contract price, terms or conditions. Any contractor request for changes shall be referred to the Contracting Officer directly or through the COR. No such changes shall be made without the express written prior authorization of the Contracting Officer. The Contracting Officer may designate assistant or alternate COR(s) to act for the COR by naming such assistant/alternate(s) in writing and transmitting a copy of such designation to the contractor.
(End of clause)
CAR 1352.216-75 Minimum and maximum contract amounts During the term of the contract, the Government shall place orders totaling a minimum of 1 unit. The amount of all orders shall not exceed nine (9) units.
(End of clause)
CAR 1352.216-76 Placement of orders
(a) The contractor shall provide goods and/or services under this contract only as directed in orders issued by authorized individuals. In accordance with FAR 16.505, each order will include:
(1) Date of order;
(2) Contract number and order number;
(3) Item number and description, quantity, and unit price or estimated cost or fee;
(4) Delivery or performance date;
(5) Place of delivery or performance (including consignee);
(6) Packaging, packing, and shipping instructions, if any;
(7) Accounting and appropriation data;
(8) Method of payment and payment office, if not specified in the contract;
(9) Any other pertinent information.
(b) In accordance with FAR 52.216-18, Ordering, the following individuals (or activities) are authorized to place orders against this contract: NIST Contracting Officers
(c) If multiple awards have been made, the contact information for the DOC task and delivery order ombudsman is IDIQ Contracting Officer.
(End of clause)
CAR 1352.246-70 Place of Acceptance
(a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract.
(b) The place of acceptance will be:
NIST
325 Broadway Boulder, CO 80305
NIST LOCAL-39 MARKING/PACKING INSTRUCTIONS
(1) If the total contract/order includes multiple quantities of the same or like item(s), segregated as separate CLIN/Item numbers, deliverables shall be packed accordingly. Each individual Package / container in the shipment shall include deliverables on a per-CLIN or Item basis.
(2) For each shipment made under this contract/order, the Contractor shall furnish itemized packing list(s), enumerating the specific contents of each shipping container and what specific individual components constitute a full and complete "unit" for each bid item. The packing list shall include the brief description of each item found in the Schedule. If more than one container is required for each unit, each container should be marked accordingly, e.g., "Box 1 of 2," "Box 2 of 2," and the boxes, where feasible, should be taped or shrink-wrapped together as an issuable unit.
(3) The contract number AND CONTRACT LINE-ITEM NUMBER (CLIN) OR ORDER ITEM
NUMBER shall be placed on the exterior of all containers.
(End)
NIST LOCAL-53 CONTRACT PERFORMANCE DURING CHANGES IN NIST OPERATING
STATUS
Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of performance, there may be circumstances beyond the control of the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), that will impact normal days of business operation, such as inclement weather, power outages, etc. In circumstances such as these, the Contractor must call the appropriate NIST campus status line to verify the operating status:
Gaithersburg Campus Operating Status Line:
(301) 975-8000
(800) 437-4385 x8000 (toll free)
Boulder Campus Operating Status Line:
(303) 497-4000
During a lapse in appropriation, access to Government facilities and resources, including equipment and systems, will be limited to excepted personnel for both Federal employees and Contractor personnel. If performance of the contract is onsite and/or requires Government interaction, unless you have been, or are notified that you are to work under an excepted status, you will automatically enter a temporary work stoppage. The work stoppage shall remain in effect until the lapse is resolved and notification is provided via the NIST website at https://www.nist.gov/ and/or the NIST operating status lines. Additionally, Contractors are encouraged to monitor public broadcasts or the Office of Personnel Management’s website at www.opm.gov for the Federal Government operating status.
NIST will provide notification to all contractors that are determined to have excepted status. All excepted contractors are required to continue performance and communicate with the appointed Contracting Officer’s Representative (COR) for further guidance, or NIST Contracting Officer if a COR is not appointed.
Contractors with supply or service contracts that are fully funded at the time of contract award and do not require access to Government facilities, resources, or active administration by Government personnel in a manner that would cause the government to incur additional obligations during the lapse in appropriation may continue performance.
https://www.nist.gov/ http://www.opm.gov/
(End)
NIST LOCAL-55 ELECTRONIC BILLING INSTRUCTIONS FOR DELIVERY/TASK ORDERS
NIST requires that Invoice/Voucher submissions are sent electronically via email to
INVOICE@NIST.GOV.
Each Delivery/Task Order Invoice or Voucher submitted shall include the following:
(1) Contract number;
(2) Contractor name and address;
(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique entity identifiers);
(4) Date of invoice;
(5) Invoice number;
(6) Amount of invoice and cumulative amount invoiced to-date;
(7) Contract Line Item Number (CLIN);
(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services delivered;
(9) Prompt payment discount terms, if offered; and
(10) Any other information or documentation required by the contract (End)
NIST LOCAL-56 INVOICING PROCESSING PLATFORM – ALTERNATE I
Upon written notice from the contracting officer the following supersedes all other instructions for the submission of payment requests. Accordingly, following written notice payment requests must be submitted electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP).
"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable payment request or invoicing instructions, Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is https://www.ipp.gov.
Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: **
The Contractor must use the IPP website to register, access, and use IPP for submitting payment requests. If not already enrolled, the Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email within three to five business days of the addition of the contract award to IPP. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email: IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973- 3131.
If the Contractor is unable to comply with the requirement to use IPP for submitting payment requests, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. Contact the contracting officer for more information on submitting a waiver request.
Defense Priorities and Allocations System (DPAS) is NOT applicable.
The solicitation will close on the date and time specified and provided. All quotations shall be delivered electronically by the specified close date and time to Lia Arthofer, Contracting Officer at lia.arthofer@nist.gov.
For information regarding this solicitation, contact the Contracting Officer at lia.arthofer@nist.gov or via phone at 303-497-3870.
Attachments:
Attachment 1 – Radio Frequency Arbitrary Waveform Generator Specifications Attachment 2 - IDIQ Ordering Procedures mailto:lia.arthofer@nist.gov
File details come from the government source that posted it. Updated .