15-T-0038_Amendment.pdf

1300460437-0001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

MOD - BASIC 030

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 08-Dec-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N68936-15-T-0038

X 9B. DATED (SEE ITEM 11)

04-Dec-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

08-Dec-2014

CODE

CDR NAWCWD CODE 254200D

ATTN: M. CHILDS

(760) 939-1932

429 E BOWEN RD - STOP 4015

CHINA LAKE CA 93555

N68936 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N68936-15-T-0038

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

SPECIFICATIONS

Specifications:

Flexible low-loss RF test cables to connect our RF test fixture to the Device Under Test (DUT). Two types of cables are needed; both should have N-type male connectors on each end. One cable should have both ends connectors straight. The other cable should have one connector straight and one connector right angle. Insertion loss should be less than or equal to 0.05 dB/ft. Required length is 180 inches (i.e. 15 feet). Both cables should have at least 83% velocity of propagation, 95 dB or greater shielding, ROHS compliant, bend radius minimum less than 1.5 inches, and a maximum VSWR of 1.35 from DC to 18 GHz.

Added information: Insertion loss should be less than or equal to 0.05 dB/ft at 1 GHz

See the table below for specifications for each cable:

Table 1 First Cable, QTY 40

Specifications Value

Connector Series 1 N

Connector Gender 1 Male

Connector Polarity 1 Standard

Connector Angle 1 Straight

Connector Impedance 1 50

Connector Series 2 N

Connector Gender 2 Male

Connector Polarity Standard

Connector Angle 2 Straight

Connector Impedance 2 50

RF Cable Impedance 50

Length 180 inches (i.e. 15 feet)

Table 2 Second Cable, QTY 40

Specifications Value

Connector Series 1 N

Connector Gender 1 Male

Connector Polarity 1 Standard

Connector Angle 1 Straight

Connector Impedance 1 50

Connector Series 2 N

Connector Gender 2 Male

Connector Polarity Standard

Connector Angle 2 Right Angle

Connector Impedance 2 50

RF Cable Impedance 50

Length 180 inches (i.e. 15 feet)

N68936-15-T-0038

(End of Summary of Changes)