2.03a_Amd_01.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section A - Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Response Due Date 12 Nov 2025 28 Nov 2025

N6883626QS0110001

Section C - Description/Specifications/Statement of Work

Miscellaneous text in this section has been modified to:

DESCRIPTION OF REQUIREMENTS

NAVSUP FLEET LOGISTICS CENTER JACKSONVILLE

SUPSHIP DETACHMENT, PASCAGOULA

1. INTRODUCTION

As part of NAVSEA outfitting under new ships construction: DDG 128 has a shipboard departmental requirement for special locks and master sets. These lock sets are color-coded and numbered by department and assigned quantities according to the attached summary of requirement.

2. REQUIREMENTS

The objective of this action is to procure DDG 128 Locks, Keys, and Tags at the SUPSHIP DETACHMENT, PASCAGOULA

3. DELIVERABLES

3.1 Padlock, 1 1/2 Inch, Keyed Alike, 79 EA

3.1.1 Padlocks - 79 each, 1 1/2 inch shackle padlocks, keyed alike, Model 84x5, 95 Series Brass Padlock or equal. Numbered and assigned to departments according to summary of requirements provided, including 2 standard keys each. Envelope Packed.

Salient Characteristics

Rekeyable Brass Cylinder with Anti-Pick, Bump Resistant Technology

6-Pin, P0 Grand Master Keyed Alike

Non-Key-Retaining Actuator

Laser Engraving Brass, 1 Side

090015-H, 1-1/2" Hardened Shackle

Lock Body Material: Brass

3.2 Padlock, 1 1/2 Inch, Keyed Different, 357 EA

3.2.1 Padlocks - 357 each, 1 1/2 inch shackle padlocks, keyed different, Model 84x5, 95 Series Brass Padlock or equal. Numbered and assigned to departments according to summary of requirements provided, including 2 standard keys each. Envelope Packed.

Rekeyable Brass Cylinder with Anti-Pick and Bump Resistant Technology

6-Pin, P0 Grand Master Keyed Different

Non-Key-Retaining Actuator

Laser Engraving Brass, 1 Side

1" Hardened Steel Shackle

3.3 Padlock, 3 inch, Keyed Different, 2 EA

3.3.1 Padlocks - 2 each, 3-inch shackle padlocks, keyed different, Model 8652, 250 Series Brass Padlock or equal. Numbered and assigned to departments according to summary of requirements provided, including 2 standard keys each. Envelope Packed.

6-Pin, P0 Grand Master Keyed Different

Non-Key-Retaining Actuator

Laser Engraving Brass, 1 Side

3" Hardened Steel Shackle

3.4 Padlocks, 1 1/2 inch, Keyed Alike for Bulletin Boards, 50 EA

3.4.1 Padlocks - 50 each, 1 1/2 inch shackle padlocks, keyed alike, Model 001, 95 Series Brass Padlock or equal. Numbered and assigned to departments according to summary of requirements provided, including 2 standard keys each. Envelope Packed.

6-Pin, P0 Keyed Alike

Non-Key-Retaining Actuator

Laser Engraving Brass, 1 Side

1-1/2" Hardened Steel Shackle

Lock Body Material: Brass

3.5 Master, Grandmaster, and Great Grandmaster Keys, 54 EA

3.5.1 Keys - 54 each, master, grand master and great grand master keys, tagged, color-coded, and assigned to department according to attached summary of requirement.

3.6 Key Tags, 438 EA

3.6.1 Key Tags - 438 each, attached to key rings, color coded, numbered, and assigned to department per the attached summary of requirement spreadsheet.

3.7 Blank Keys, 100 EA

3.7.1 Blank Keys - 100 each, spare keys

4.0 DELIVERY LOCATION

SUPSHIPGC / DDG 128

100 SINGING RIVER ISLAND

BLDG 88

PASCAGOULA, MS 39567

4.1 Point of Contacts

LT BRANDON HICKS, 228-935-8440, brandon.j.hicks4.mil@us.navy.mil

YINEIRY (GENIE) DUCRE, 504-237-7007, yineiry.s.ducre.civ@us.navy.mil

ROBERT FLANNERY, 228-935-0248, robert.a.flannery1@navy.mil

5.0 DEFENSE BIOMETRIC IDENTIFICATION SYSTEMS (DBIDS):

Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point. If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

- Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center representative.

- The VCC will pull up your information in the computer, ensuring all information is current and correct.

- Once your information is validated, a temporary DBIDS credential is provided.

- Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

- For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

- The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

- Present a letter or official document from my government sponsoring organization that provides the purpose for your access.

- Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

- Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

- Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, fingerprints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

- You may now proceed to work.

For additional questions about obtaining a DBIDS card, contact your local base visitor control center. Additional information is available at https://www.cnic.navy.mil/Operations-and-Management/Base-Support/DBIDS/.

Section M - Evaluation Factors for Award

Miscellaneous text in this section has been modified to:

Basis of Evaluation-Commercial Products and Commercial Services per FAR Subpart 13.106

Per FAR Subpart 13.106-1: This is to notify Quoters that the basis on which award will be made is lowest price, technically acceptable (LPTA). The Government intends to award a firm-fixed-price contract resulting from this solicitation to the responsible Quoter whose offer conforming to the solicitation will be the most advantageous to the government. Each quote shall be in the form prescribed by, and shall contain a response to, each of the areas identified in the solicitation provision entitled "Addendum 52.212-1 Instructions to Offerors - Commercial Products and Commercial Services."

The type of source selection utilized in this procurement is LPTA. The Government reserves the right to make award solely on initial quote received.

- Initially, quotes shall be listed in order of price from lowest to highest. Technical Capability will be evaluated, and appropriate adjectival ratings will be assessed on all quotes received.

Price - The Government will evaluate price in accordance with FAR 13.106-3(a), Award and Documentation. The Government may evaluate any and all information submitted by the quoter to support the reasonableness of the prices quoted. The method of evaluation used is solely within the discretion of the Contracting Officer.

- Price will be evaluated by multiplying the estimated quantities by the offered unit price for each line item and then adding the totals together thereby identifying the offeror's total estimated price for each line item.

Note: Quotes that do not quote all items or which quote only partial CLIN pricing will be considered non-responsive. Failure to furnish the price in accordance with the instructions above shall render the quote unacceptable.

Technical Capability: The technical rating reflects the degree to which the quote meets or does not meet the minimum performance or capability requirements. For a quote to be found technically acceptable, the quote must clearly meet the minimum requirements of the solicitation. Failure to provide the following will result in an unacceptable rating: Capability Statement detailing the products' specifications.

If the quote is found to be "Unacceptable", then the Quoter will be removed from further consideration of the award.

Acceptable (A)

The quote meets requirements and indicates an adequate approach and understanding of the requirements, and risk of unsuccessful performance is low.

Unacceptab le (U)

The quote does not meet requirements of the solicitation and/or risk of unsuccessful performance is unacceptable. Quote is unawardable.

The following clauses were deleted:

FAR Clauses Incorporated by Full Text

52.212-2 Evaluation-Commercial Products and Commercial Services. (Nov 2021)

Evaluation-Commercial Products and Commercial Services (Nov 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price Technical

(b) . The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic Options requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

JACKSONVILLE FL 32212-0097

JACKSONVILLE, FL 32212-0097

UNITED STATES

KYLE NELSON, Email: kyle.a.nelson2.civ@us.navy.mil Telephone: 9047186895 AdminBy:

SCD: PAS:

a) Extend the solicitation closure date to 28 November 2025 @ 10 AM ET.

b) Update Section C - Description of Requirement

c) Update Section M - Evaluation Factors for Award