RFQ N6883620Q0003.pdf

SEE ADDENDUM

(No Collect Calls)

N6883620Q0003 18-Dec-2019

b. TELEPHONE NUMBER

904-542-1254

8. OFFER DUE DATE/LOCAL TIME

03:30 PM 27 Dec 2019

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N688369. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DANIELLE N. DINGER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N6597120RCGP013

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NAVSUP FLC JACKSONVILLE CONTRACTS DIV

DANIELLE DINGER

110 YORKTOWN AVE, 3RD FLOOR NAS

JACKSONVILLE FL 32212-0097

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N65971 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

NAVAL CONSTRUCTION TRAINING CENTER

LT JOHN LEDFORD

5510 CBC 8TH STREET

BUILDING 443

GULFPORT MS 39501-5003

TEL: (228) 871- 2675 FAX:

904-542-1098FAX:

TEL: 904-542-1254 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

X 8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$12,000,000

NAICS:

611430

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF100

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N6883620Q0003

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Months

INSTRUCTOR SUPPORT SERVICES

FFP

The Contractor shall provide Instructor Support Services in support of the Naval Construction Training Center (NCTC) at Gulfport, Mississippi in accordance with the Performance Work Statement (PWS) and Quality Assurance Surveillance Plan (QASP) attached herein.

FOB: Destination

MILSTRIP: N6597120RCGP013

PURCHASE REQUEST NUMBER: N6597120RCGP013

SIGNAL CODE: A

PSC CD: U009

NET AMT

0002 1 Lot

TRAVEL

FFP

Reimbursement CLIN for Contractor travel CONUS not to exceed $12,000.00.

Exact dates and times shall be provided 72 prior to travel. The not to exceed amount is the maximum reimbursable amount and shall only be exceeded at the Contractor's own risk. The Contractor shall be authorized travel expenses consistent with the Joint Travel Regulation (JTR). All travel and authorization shall be approved by the COR prior to any travel.

MILSTRIP: N6597120RCGP013

PURCHASE REQUEST NUMBER: N6597120RCGP013

1001 12 Months

OPTION INSTRUCTOR SUPPORT SERVICES

FFP

The Contractor shall provide Instructor Support Services in support of the Naval Construction Training Center (NCTC) at Gulfport, Mississippi in accordance with

1002 1 Lot

OPTION TRAVEL

FFP

Reimbursement CLIN for Contractor travel CONUS not to exceed $12,000.00.

Exact dates and times shall be provided 72 prior to travel. The not to exceed amount is the maximum reimbursable amount and shall only be exceeded at the Contractor's own risk. The Contractor shall be authorized travel expenses

2001 12 Months

OPTION INSTRUCTOR SUPPORT SERVICES

FFP

The Contractor shall provide Instructor Support Services in support of the Naval Construction Training Center (NCTC) at Gulfport, Mississippi in accordance with

2002 1 Lot

OPTION TRAVEL

FFP

Reimbursement CLIN for Contractor travel CONUS not to exceed $12,000.00.

Exact dates and times shall be provided 72 prior to travel. The not to exceed amount is the maximum reimbursable amount and shall only be exceeded at the Contractor's own risk. The Contractor shall be authorized travel expenses

3001 12 Months

OPTION INSTRUCTOR SUPPORT SERVICES

FFP

The Contractor shall provide Instructor Support Services in support of the Naval Construction Training Center (NCTC) at Gulfport, Mississippi in accordance with

3002 1 Lot

OPTION TRAVEL

FFP

Reimbursement CLIN for Contractor travel CONUS not to exceed $12,000.00.

Exact dates and times shall be provided 72 prior to travel. The not to exceed amount is the maximum reimbursable amount and shall only be exceeded at the Contractor's own risk. The Contractor shall be authorized travel expenses

4001 12 Months

OPTION INSTRUCTOR SUPPORT SERVICES

FFP

The Contractor shall provide Instructor Support Services in support of the Naval Construction Training Center (NCTC) at Gulfport, Mississippi in accordance with

4002 1 Lot

OPTION TRAVEL

FFP

Reimbursement CLIN for Contractor travel CONUS not to exceed $12,000.00.

Exact dates and times shall be provided 72 prior to travel. The not to exceed amount is the maximum reimbursable amount and shall only be exceeded at the Contractor's own risk. The Contractor shall be authorized travel expenses

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

NAVAL CONSTRUCTION TRAINING CENTER (NCTC)

CONSTRUCTION TECHNICAL INSTRUCTORS AND STAFF SUPPORT

GULFPORT, MS.

INTRODUCTION: The Naval Construction Training Center (NCTC) Gulfport is a shore activity in an active operating status. An Echelon V command, NCTC’s Commanding Officer reports to the Center for Seabees and Facilities Engineering (CSFE); the Naval Education and Training Command (NETC); and ultimately to the Chief of Naval Operations (CNO), respectively, NCTC Gulfport is subject to the regional area coordination authority of the Commanding Officer, Naval Construction Battalion Center (NCBC), Gulfport on which it is located. NCTC Gulfport and NCTC Port Hueneme, California are the two NCTC locations that provide basic construction training to construction Military Occupation Specialties (MOS’s) in the Army and Air Force and basic and advance training for Navy Seabee personnel. Instructor support is provided by contract personnel for NCTC Gulfport, Mississippi.

SCOPE: The Naval Construction Training Center (NCTC) Gulfport, Mississippi is acquiring instructor support services to carry out the training requirements for basic construction training to military personnel in the Army, Air Force and Navy assigned to construction occupational fields.

Support is also required to provide advance construction training to Navy Seabee personnel. The number of specific courses, course duration, start dates, curriculum, class size, and the number of instructors required to adequately meet NCTC Gulfport mission is determined by the coordinated effort of NCTC Gulfport, CSFE, and NETC and approved by the CNO. The contractor’s sole responsibility is to provide the number of fully qualified instructors approved to meet the training requirements and to see that the training requirements are fully met as prescribed by NCTC Gulfport. This training is continuous throughout the year and classes overlap and are staggered in order to meet scheduled training requirements.

2.0 ACRONYMS AND ABBREVIATIONS:

A Apprentice Training (Associated with Basic Builder and Steel Worker Courses) ADV-BU Advanced Builder AO Administrative Officer AWD Area Wage Determination BU-A Builder Apprentice Training C1 Advance Specialized Skill Training (follow-on training to Basic Apprentice

Training) CANTRAC Catalog of Navy Training Courses CDP Course Data Process CETARS Corporate Enterprise Training Activity Resource Systems (US Navy) CMCT Construction Management Continuum Training CNO Chief of Naval Operations CONUS Continental United States COR Contracting Officer Representative CSFE Center for Seabees and Facilities Engineering D1 Individual, Not Rating-Specific Professional Development Functional Skill

Training DFWP Drug Free Workplace Program DGR Designated Government Representative DISCO Defense Industrial Security Clearance Officer DODAAC Department of Defense Activity Address Code DoL Department of Labor DoNCAF Department of the Navy Central Adjudication Facility e-QIP Electronic Questionnaires for Investigations Processing D-0S Defense Operations Specialist ERPs Equipment Replacement Plans F1 Individual Skill or Rating-Specific Functional Training FAD Facility Access Determination FAR Federal Acquisition Regulation FOIA Freedom of Information Act FSO Facility Security Officer G1 Pipeline Skill Progression Training GMAW Gas Metal Arc Welding ISO International Organization for Standardization JPAS Joint Personnel Adjudication System KO Contracting Officer MOPP Mission-Oriented Protective Posture (US DoD)

MOS Military Occupation Specialties NAC National Agency Check NACLC National Agency Check with Local Agency and Credit Checks NATO North Atlantic Treaty Organization NAVFAC Naval Facilities Engineering Command NCF Naval Construction Force NCG Naval Construction Group NCTC Naval Construction Training Center NETC Naval Education and Training Command NISP National Industrial Security Program NITRAS Navy Integrated Training Resources and Administration System NMCB Naval Mobile Construction Battalion OAW Oxy-acetylene Brazing, Cutting and Welding OCONUS Outside the continental United States OPM Office of Personnel Management PCDP Personal and Career Development Plan PII Personally Identifiable Information PWS Performance Work Statement QAE Quality Assurance Evaluator QCP Quality Control Plan QIP Questionnaires for Investigations Processing RST Reinforcing Steel SAAR-N System authorization Access Request - Navy SCA Service Contract Act SCI Sensitive Compartmental Information SMAW P-U Shielded Metal Arc Welding Pipe Uphill SMAW Shielded Metal Arc Welding STANAG Military Standardization Agreement (NATO) SW-A Steel Worker Apprentice Training USCIS United States Citizenship and Immigration Services USN United States Navy WAWF Wide Area Work Flow

3.0 TRAINING COURSE DIRECTIVES: The following Catalog of Navy Training Courses (CANTRAC) Training Course Control Documents shall serve as directives for each course listed and shall also serve as attachments to this Performance Work Statement (PWS). In the event of a conflict between documents referenced herein and the contents of this PWS, the contents of this PWS take precedence. Nothing in this PWS, however, supersedes applicable laws and regulations, unless a specific exemption has been obtained.

3.2.1 INTERSERVICE BUILDER APPRENTICE TRAINING (BU-A NAVY)

A-710-0010

3.2.2 STEELWORKER CLASS A USN BLOCK 0 A-711-0005

3.2.3 STEELWORKER CLASS A USN BLOCK 1 A-711-0006

3.2.4 CONSTRUCTION PLANNER AND ESTIMATOR SPECIALIST A-412-0012

3.2.5 CREW LEADER LEVEL CONSTRUCTION MANAGEMENT CONTINUUM

TRAINING A-710-0051

3.2.6 SUPERVISOR LEVEL, CONSTRUCTION MANAGEMENT CONTINUUM

TRAINING A-710-0052

3.2.7 CONCRETE AND MASONRY A-710-0055

3.2.8 STRUCTURE FRAMING A-710-0054

3.2.9 INTERIOR AND EXTERIOR FINISHES A-710-0056

3.2.10 HEAVY CONSTRUCTION I A-710-0044

3.2.11 HEAVY CONSTRUCTION II A-710-0045

3.2.12 POWDER ACTUATED TOOLS A-710-0038

3.2.13 WELDING SUPERVISOR A-711-0031

3.2.14 SHEETMETAL WORK A-711-0026

3.2.15 STEEL REINFORCING A-711-0027

3.2.16 GAS CUTTING AND WELDING A-711-0024

3.2.17 METAL FABRICATION AND LAYOUT A-711-0025

3.2.18 ARC WELDING (STRUCTURAL) A-711-0022

3.2.19 ARC WELDING (PIPE) A-711-0023

3.2.20 SHIELDED INERT GAS WELDING A-711-0002

3.2.21 TRANSPORTATION OPERATIONS A-730-0046

3.2.22 EARTHWORK OPERATIONS A-730-0047

3.2.23 PAVEMENTS A-730-0048

3.2.24 CONSTRUCTION INSPECTOR A-710-0022

3.2.25 TOOL AND EQUIPMENT MAINTENANCE TECHNICIAN A-712-0010

3.0.1 TRAINING REQUIREMENTS

3.0.2 GENERAL: The contractor shall provide fully qualified instructors who demonstrate experience in the areas listed in the Performance Work Statement (PWS). In the event an instructor(s) has to be replaced, the replacement shall be as qualified or more qualified than the instructor(s) being replaced. The Government reserves the right to review and approve resumes for any instructor or Training Master Scheduler replacement.

3.0.2 TRAINING ENVIRONMENT: The services required hereunder shall be performed utilizing both of the following specific instructional environments (these training environments are provided and maintained by the Government).

Legacy Environment (Group-Paced, Instructor-Led). This is traditional classroom instruction in a Navy resident schoolhouse environment. The contractor shall provide on-site instructors to teach the course.

Legacy Lab Environment (Builder Projects, Instructor-Led). Exercises are conducted on-site builder projects in either an indoor lab or outside site project. The contractor shall provide on-site instructors for each project exercise.

3.0.3 TRAINING SCHEDULES: Training shall normally be conducted eight hours a day five days a week for the length of the course. However, the daily activity may extend beyond 8 hours if required to meet all training objectives outlined in the curriculum. Student remediation may be required and should be considered beyond the normal eight-hour training time for each class.

During the execution of the class schedule where holidays or other events impact the expeditious movement of students through the training pipeline, the Naval Construction Training Center (NCTC) Site Director may extend the number of daily training hours to compensate, but not to exceed 40 hours per week per instructor.

3.0.4 CLASS CONVENINGS: NCTC Gulfport will establish class schedules. Any changes to class/course schedules will be established by NCTC Gulfport and forwarded to the contractor Training Master Scheduler for implementation.

3.0.5 CHANGES TO CURRICULUM: Only training materials and lesson plans promulgated by CSFE will be used in training delivery. It is recognized that certain portions of the course may become outdated based on a number of external factors. The contractor’s instructors are encouraged to identify and submit recommendations to the contractor’s Training Master Scheduler who recommends, makes changes and revisions to curriculum and submits such recommended changes and revisions to the NCTC Gulfport Site Director. However, the content of the instructional material shall not be modified until formally approved and implemented by CSFE.

Any such contractor recommendations shall be at no additional cost to the Government and shall become the property of the Government.

3.0.6 ACADEMIC STANDARDS: All instructors shall adhere to and maintain academic standards (e.g., course grading criteria established by NCTC Gulfport) in accordance with assessment standards for the course. If the student(s) have academic problems, the instructor shall provide remediation to improve their course performance. Academic standards for each course can be found in the testing section of the course curriculum.

3.0.7 CONTRACTOR RELATIONSHIP TO MILITARY AUTHORITIES: Contract instructors shall have the authority and are empowered to maintain their classrooms in an orderly and professional atmosphere.

3.0.7.1 COMPLAINTS AGAINST STUDENTS: Students are expected to conduct themselves in a professional and military manner. Students who fail to conduct themselves with the proper classroom decorum shall be cautioned by the contract instructor; if the inappropriate conduct continues, the student shall be referred by the contract instructor to the NCTC Site Director. In the event of any formal military action against students under their tutelage, contract instructors may be requested to provide written statements to or appear in person at Non-Judicial Punishment (NJP) or military Courts-Martial proceedings. Under no circumstance is a contract instructor to take disciplinary action against any student(s).

3.0.7.2 SITE MANAGEMENT: The Training Master Scheduler shall be designated as the Site Lead. In addition to performing duties outlined in paragraph 3.1, the individual shall provide overall management, supervision, and coordination of this contract and shall act as the local point of contact with the Government. The Site Lead shall have full authority to act for the contractor on all matters relating to daily operations of the contract. The contractor shall furnish, in writing, to the NCTC Gulfport Business Manager the name and contact information of the

Site Lead no later than (15) calendar days after contract award. Providing a contractor Site Lead will be at no additional cost to the Government.

3.1 INSTRUCTOR SUPPORT SERVICES (TRAINING MASTER SCHEDULER): The contractor shall provide a Training Master Scheduler to coordinate all training conducted by the Naval Construction Training Center Gulfport on site and scheduled off-site training. The contractor shall coordinate input from the Center for Seabees and Facilities Engineering (CSFE) and Naval Education and Training Command (NETC) regarding the number of classes, area of instruction, class size and schedule dates for proposed classes. The contractor shall make all arrangements for classroom availability and assignments, insure required training aids are made available for each class, coordinate and monitor all classrooms and laboratory facilities assigned to NCTC Gulfport, provide student rosters to assigned instructors.

Serve as the single point of contact for all matters pertaining to “A” (Apprentice Training), C1 (Advance specialized skill training), D1 (Individual, not rating-specific professional development functional skill training), F1 (Individual skill or rating-specific functional training), and G1 (Pipeline skill progression Training) all related courses associated with NETC Seabee basic, intermediate and advanced training.

Respond to all correspondence pertaining to “A”, C1, D1, F1, and G1 course issues.

Ensure the essential NITRAS (Navy Integrated Training Resources and Administration

System), CETARS (Corporate Enterprise Training Activity Resource Systems [US Navy]) and Master Course Reference File (Seabee University/Course Schedule) are current and in accordance with NCTC, NETC and CSFE directives.

Draft and submit schedules to be used in the execution of Naval Technical Training conducted at NCTC Gulfport and off-site facilities.

Maintain records and data pertaining to “A”, C1, D1, F1, and G1 school courses of instruction.

Schedule and conduct weekly scheduling meetings between NCTC Gulfport, Schoolhouse Departments, D1 and F1 course coordinators, the Naval Construction Group Two (NCG2) and tenant Naval Mobile Construction Battalion (NMCB) training personnel.

Develop and submit for approval and promulgation weekly C1, D1, F1, and G1 school course schedules.

Identify scheduling conflicts, provide coordinated recommendations for approval and implement resolutions to scheduling issues to facilitate NCF unit D1 and F1 course training to the maximum extent.

Inform government training department of, and propose resolutions to, issues arising from “A”, C1, D1, F1, and G1 school course completion packages.

Assist the Business/Financial Management Department Head (N8) with matters pertaining to “A”, C1, D1, F1, and G1 scheduling and school costs associated with courses taught, Equipment Replacement Plans (ERPs) and information on schedules for reimbursable billings.

Provide Command data for facilities level utilization and scheduling briefs pertaining to school courses.

Ensure monthly Metrics brief is updated and ready for presentation.

Coordinate/liaise with schoolhouse company commanders, course managers, D1 and F1 course coordinators, the NCG2 and tenant NMCB training personnel for approval on matters relating to naval technical training schedules and opportunities.

Provide advance notice of technical training opportunities to schoolhouse company commanders, course managers, D1 and F1 course coordinators, the NCG2 and tenant NMCB training personnel of any approved changes to establish schedules to facilitate continued coordination and minimize discrepancies in student attendance.

Receive telephone calls and visitors, answer inquiries concerning scheduling and coordinating courses.

Meetings scheduled will be attended on time. Scheduling conflicts, problems, or issues will be identified and resolved within 48 hours.

The contractor shall submit training schedules for the Catalog of Navy Training Courses (CANTRA) taught at NSTC Gulfport. Class scheduling is determined by the number of courses scheduled to convene throughout the fiscal year. Additional classes may be scheduled and courses added based on inter-service training requirements. Performance goals for Task 1 are:

1. Prepare for approval, various types of schedules used in the execution of NCTC training.

2. Ensure all courses and instructors are scheduled to meet NCTC Gulfport course requirements.

3. Collect, organize and prepare data for updating reports required for NCTC Gulfport related to training and scheduling.

HISTORICAL WORK DATA: FY19 historical data shows 148 classes were scheduled at NCTC Gulfport.

3.2 INSTRUCTOR SUPPORT SERVICES: The contractor shall provide qualified Inter- Service Builder Apprentice Training (BU-A) Instructors and qualified Advanced Instructors as outlined in paragraph 3.2.1 through 3.2.35 to meet the training requirements and schedule as determined by NCTC Gulfport under authority of CSFE, NETC and the CNO. Any contractor assigned to serve as an alternate and/or replacement shall be as qualified as the contractor they are replacing. Due to the high visibility of the NCTC training program, contractor deviations from the labor mix of instructors deemed necessary by the command to meet the training requirements and schedule must be justified in the management plan in detail to the satisfaction of the Commanding Officer NCTC Gulfport. The number of courses and student quotas are expected to approximately equal the number of courses that convened in FY18. The course descriptions are provided in paragraphs 3.2.1 through 3.2.35. These are the courses scheduled for FY20.

3.2.1 INTER-SERVICE BUILDER APPRENTICE TRAINING (BU-A NAVY) A-710-

0010 COURSE OF INSTRUCTION: Contractor shall provide qualified instructors to provide training in the basic technical knowledge and basic practical skills in preparation for immediate usefulness as a Structural Apprentice for all Navy Seabee, Army and Air Force personnel requiring basic apprenticeship training. Contractor shall provide instruction in the use of builder tools. Contractor shall provide instruction in the selection of equipment and materials used in manufacturing woodshop projects; erecting light frame structures, suspended ceiling tile, hot tar roofing, three tab composition shingles, concrete masonry structure, concrete forms, windows to doorjambs and casting to scope. Contractor shall provide instruction in installing, finishing drywall, installing door jambs with casing, installing baseboard and molding, installing composition floor tile and ceramic tile.

Contractor shall provide instruction in the preparation and application of paint. Contractor shall provide instruction in mixing, transporting, placing and finishing concrete.

HISTORICAL WORK DATA: The BU-A course length is 48 instructional days in duration. Two instructors are required to be present each day of the course. Twenty-eight

(28) classes were taught in fiscal year 2019.

3.2.2 STEELWORKER CLASS “A” USN B L O C K 0 A-711-0005 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructor personnel to provide apprentice level training in construction mathematics, blueprint reading and basic layout, gas welding equipment, gas cutting, gas welding and brazing, silver brazing, vertical and flat arc welding, reinforcing steel, and fiber line.

HISTORICAL WORK DATA: The Steelworker (SW-A) Class A USN Block 0 course length is 27 instructional days in duration. An average of nineteen (19) classes are scheduled per year over the next three years.

3.2.3 STEELWORKER CLASS “A” USN B L O C K 1 A-711-0006 COURSE OF

INSTRUCTION: Contractor shall provide qualified instructor personnel to provide apprentice level training in basic sheet metal layout, pattern development, fabrication, and pre-engineered buildings including installation and maintenance of doors.

HISTORICAL WORK DATA: The Steelworker (SW-A) Class A USN Block 1 course length is 7 instructional days in duration. An average of eighteen (18) classes are scheduled per year over the next three years.

3.2.4 CONSTRUCTION PLANNER AND ESTIMATOR SPECIALIST A-412-0012

COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide selected personnel with the knowledge and skills necessary to plan, estimate, schedule, and report on construction projects at existing Naval bases, advance bases and selected off-base sites during peacetime and contingency operations in accordance with the Construction Estimating, NTRP 4-04.2.3 and Seabee Crew Leader Handbook.

HISTORICAL WORK DATA: The Construction Planner and Estimator Specialist course is 50 instructional days in duration. Five (5) classes were taught in fiscal year 2019.

3.2.5 CREW LEADER CONSTRUCTION MGT CONTINUUM TRAINING (CMCT) A-710-

0051 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide training for Naval Construction Force (NCF) personnel E4 and E5, the basic level III Construction management knowledge and skills necessary to perform as a crew leader on an NCF construction project, specifically duties related to planning and development of the project package, and tools for managing the day-to-day NCF construction activities.

HISTORICAL WORK DATA: The CMCT course is 18 instructional days in duration. Two (2) classes were taught in fiscal year 2019.

3.2.6 SUPERVISOR LEVEL, CONSTRUCTION MANAGEMENT CONTINUUM

TRAINING A-710-0052: Contractor shall provide qualified instructor personnel to provide construction management training to Naval Construction Force (NCF) personnel E6 and above, Level II Construction Management knowledge and skills necessary to perform as a construction supervisor on one or more NCF construction projects, specifically the management and oversight duties related to project package, resource leveling, reporting, and interfacing with other agencies.

HISTORICAL WORK DATA: The CMCT Supervisor course is 9 instructional days in duration.

Two (2) classes were taught in fiscal year 2019.

3.2.7 CONCRETE AND MASONRY A-710-0055 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide instruction in concrete and masonry construction principles and techniques to include site layout, forming “D” reinforcement placement and finishing, construction using concrete masonry units (CMU) block, lay-out and estimating.

HISTORICAL WORK DATA: The Concrete Masonry course is 25 instructional days in duration. Three (3) classes were taught in fiscal year 2019.

3.2.8 STRUCTURE FRAMING A-710-0054 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction in Rough Carpentry framing principles and techniques that cover the following areas; floors, walls, roof frames and trusses.

HISTORICAL WORK DATA: The Structure Framing course is 20 instructional days in duration. Four (4) classes were taught in fiscal year 2019.

3.2.9 INTERIOR AND EXTERIOR FINISHES A-710-0056 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide in-depth instruction in interior and exterior finishes that incorporate the following areas; drywall, doors and windows, painting, ceilings, exterior finishes, stairs, interior trim and roofing applications.

HISTORICAL WORK DATA: The Interior and Exterior Finishes course is 35 instructional days in duration. Three (3) classes were taught in fiscal year 2019.

3.2.10 HEAVY CONSTRUCTION I A-710-0044 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to builders E-3 and above in the knowledge and skills required to perform Heavy Timber Bridge construction.

Instruction includes care for and use of an Engineer’s Level, develop sketches, layout, assemble and erect Heavy Timber construction projects using tools, equipment and materials from the Bridge and Dock Builders Tool Kit 80041.

HISTORICAL WORK DATA: The Heavy Construction I course is 5 instructional days in duration. Five (5) classes were taught in fiscal year 2019.

3.2.11 HEAVY CONSTRUCTION II A-710-0045 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide in-depth instruction to builders E-2 to E-6 in the basic knowledge and skills required to plan and estimate materials, direct and assist in the safe conduct of NCF pile-driving operations using common pile-driving rigs using all types of piles. Instruction shall include appropriate High-Risk safety training.

Prepare simple drawings and construction specifications. Make accurate estimates of materials, equipment, and manpower requirements using the NAVFAC P-405. Establish and maintain a standard pile-driving log. Observe pile-driving operations.

HISTORICAL WORK DATA: The Heavy Construction II course is 10 instructional days in duration. Two (2) classes were taught in fiscal year 2019.

3.2.12 POWDER ACTUATED TOOLS A-710-0038 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide in-depth instruction to E-1 and above personnel leading to a Hilti Operators License. Instruction shall include the following in accordance with approved Hilti technical and tool operation manuals, safety, operations, cleaning and preventive maintenance on Hilti low velocity powder actuated tools to include only the 451 and 460 powder actuated tools.

HISTORICAL WORK DATA: The Powder Actuated Tools course is one (1) instructional day in

3.2.13 WELDING SUPERVISOR A-711-0031 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction for E-5 and above personnel. The course covers the necessary knowledge and skills to perform as a Welding Supervisor. Training includes review of management systems for welding supervisors, requirements of welds, detailed descriptions of welding processes, welding metallurgy, welding symbols, welding instructions, welding economics, the application of welding standards, welding inspection, health and safety, weld reports and records.

HISTORICAL WORK DATA: The Welding Supervisor course is 15 instructional days in duration.

One (1) classes were taught in fiscal year 2019.

3.2.14 SHEETMETAL WORK A-711-0026 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction for steelworkers E4 through E6. Instruction shall provide steelworker trainees with the knowledge and skills required for pattern development and lay-out for sheet metal ductwork, to include square to round transitions, intricate and compound angles; 3 piece 90 degree elbow fabrication; lay-out and cut selected ductwork transitions to include elbows, branch connections, “T” and “Y” joints and end caps for pre-fabricated and one-off sheet metal ductwork pieces.

HISTORICAL WORK DATA: The Sheet Metal Worker course is 10 instructional days in

3.2.15 STEEL REINFORCING A-711-0027 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide steelworker trainees with the knowledge and skills necessary to understand and interpret construction prints and specifications, conduct material estimating of reinforcing steel from construction prints, create reinforcing steel bend schedules, and provide skills in cutting, bending, tying, and placing reinforcing steel. In addition, the trainee will utilize hand and power tools to cut and bend reinforcing steel to construction specifications. This course is a module of the Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Steel Reinforcing course is 10 instructional days in duration.

Two (2) classes were taught in fiscal year 2019.

3.2.16 GAS CUTTING AND WELDING A-711-0024 COURSE OF INSTRUCTION:

Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Oxy-acetylene Brazing, Cutting and Welding (OAW) on brass, copper and mild carbon steel given construction prints and specifications; equipment set-up; material selection and preparation; position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet. This course is a module of Steelworkers (SW) Advance Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Gas Cutting and Welding course is 10 instructional days in

3.2.17 METAL FABRICATION AND LAYOUT A-711-0025 COURSE OF INSTRUCTION:

Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers in pipe-lay-out with steel squares, calculate welding offsets, use of pipe lay-out tools such as a contour marker, centering head, magnetic pipe levels and prefabricated pipe wrap-arounds;

layout and cut selected pipe transitions to include elbows, branch connections, “T” and “Y” joints and end caps on mild steel pipe. This course is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Metal Fabrication course is 10 instructional days in

3.2.18 ARC WELDING (STRUCTURAL) A-711-0022 COURSE OF INSTRUCTION:

Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Shielded Metal Arc Welding (SMAW) on structural steel given construction prints and specifications; equipment set-up; material selection and preparation; position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet. This course is a module of Steelworker (SW) Advanced Pipeline (A-711- 0030).

HISTORICAL WORK DATA: The Arc Welding course is 15 instructional days in duration. Three

(3) classes were taught in fiscal year 2019.

3.2.19 ARC WELDING (PIPE) A-711-0023 COURSE OF INSTRUCTION: Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills to Steelworkers to perform Shielded Metal Arc Welding (SMAW) on structural steel pipe given construction prints and specifications;

equipment set-up; material selection and preparation; position welding to include horizontal, vertical and overhead; types of welds to include square groove butt, single “V” groove and fillet.

This course is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Arc Welding (Pipe) course is 10 instructional days in duration.

Two (2) class was taught in fiscal year 2019.

3.2.20 SHIELDED INERT GAS WELDING A-711-0002 COURSE OF INSTRUCTION:

Contractor shall provide qualified instructor personnel to provide in-depth instruction to Steelworkers E4 through E6. Instruction shall provide the knowledge and skills necessary to identify, set-up, and maintain all items in the NMCB Combination Electric Arc Inert-Gas Welding Kit, perform gas metal arc and gas tungsten arc welding of ferrous and non-ferrous metals up to and including 3/8 inch thickness, including selection of welding wire and method.

This is a module of Steelworker (SW) Advanced Pipeline (A-711-0030).

HISTORICAL WORK DATA: The Shielded Inert Gas Welding course is 15 instructional days in duration. Two (2) class was taught in fiscal year 2019.

3.2.21 TRANSPORTATION OPERATIONS A-730-0046 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to perform Transportation Supervisor duties, transport hazardous materials, plan line hauls, and operate manual truck-tractors using technical references, in normal field conditions.

HISTORICAL WORK DATA: The Transportation Operations course is 20 instructional days in

3.2.22 EARTHWORK OPERATIONS A-730-0047 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to utilize geographic information systems to perform horizontal construction, trenching and road construction and maintenance using technical references, in normal field conditions.

HISTORICAL WORK DATA: The Earthwork Operations course is 25 instructional days in duration. Three (3) classes were taught in fiscal year 2019.

3.2.23 PAVEMENTS A-730-0048 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide Equipment Operator personnel the advanced technical training to safely perform soil stabilization and asphalt operations in normal field conditions.

HISTORICAL WORK DATA: The Pavements course is 20 instructional days in duration. Three

(3) classes were taught in fiscal year 2019.

3.2.24 CONSTRUCTION INSPECTOR A-710-0022 COURSE OF INSTRUCTION

Contractor shall provide qualified instructor personnel to provide personnel with the knowledge and skill factors to review and analyze project construction drawings and specifications and prepare a Construction Inspection Plan including a checklist of inspection points during critical phases of construction and installation. Verify that all materials and/or equipment ordered meet specifications and verify their conformance to those specifications upon receipt. Inspect all phases of construction and installation, including civil, architectural and structural, electrical and mechanical, for compliance with drawings, specification and acceptable safe operating, installation and construction practices. Coordinate and observe specified tests on materials, electrical and mechanical systems (including operational tests on installed equipment) and ensures the contractor performs quality control tests on such items as sub base materials, aggregates and cementations for binding and on related mixes before, during and after installation. Upon receipt of all test results, the inspector analyzes the results for compliance with given specifications, prepares logs, records and reports on all inspections and tests.

HISTORICAL WORK DATA: The Construction Inspector course is 40 instructional day in duration. Four (4) classes were taught in fiscal year 2019.

3.2.25 TOOL AND EQUIPMENT MAINTENANCE TECHNICIAN A-712-0010 COURSE OF

INSTRUCTION Contractor shall provide qualified instructor personnel to provide advanced technical training in the installation, repair and maintenance of construction tools and equipment.

To provide technical training in the installation, repair and maintenance of carpenter shop equipment, blade reconditioning equipment, portable power and hand tools. To provide instruction in procedures for establishing preventive maintenance schedules, set up and maintenance of manufacturer's and technical file, of recommended maintenance and operating procedures for construction battalion central tool rooms.

HISTORICAL WORK DATA: The Tool and Equipment Maintenance Technician course is 36 instructional days in duration. Two (2) class was taught in fiscal year 2019.

3.3 INSTRUCTOR WORKLOAD DATA: Based on historical data, it is estimated that 24,664 hours of instruction is required based on 30 courses, 243 instructional days at 8 instructional hours per day. See Addendum I for number of courses that was taught in FY19 and the number of instructors required. See Addendum II FY20/22 proposed course schedule provided.

3.4 SKILLS AND KNOWLEDGE REQUIRED FOR TASK 1: TRAINING MASTER

SCHEDULER POSITION The Scheduler shall have specialized experience, knowledge, skills and abilities to successfully perform the duties of the position. Experience should demonstrate a practical knowledge of the subject area of the position and the methods and techniques utilized in scheduling training in both a classroom and field exercise environment. The Scheduler shall possess knowledge of Navy Seabee structure and be familiar with all construction related vocations.

The Scheduler shall have training scheduling experience gained through educational and job experience. The Scheduler shall be able to communicate clearly, concisely and effectively with all levels of personnel within the training environment. Scheduler shall have knowledge and ability to operate computers and other office automated systems in order to prepare reports/ presentations, data input and extraction and possess experience in drafting course curriculum.

Minimum Qualification:

• Education: Scheduler shall possess a bachelor degree in a business related or teaching field.

• Scheduler shall possess a training scheduling background and a minimum of 5 years scheduling experience as a training scheduler.

Physical Demands: Work is primarily in an office environment. Course monitoring will on occasion require interaction and observation in a field construction site environment with a minimum degree of physical exertion. During site project monitoring, the Scheduler will be required to be knowledgeable of safety regulations and requirements involving construction site operations. The Scheduler shall wear all prescribed safety gear/equipment when appropriate.

Work Environment: The contractor working environment is primarily in an office setting. Project site observations involve everyday risks and discomforts associated with work on a construction site.

Replacement Personnel: Should the Scheduler need to be replaced at any time during the contract period of performance, the Scheduler replacement will be as qualified or more qualified than the person being replaced. The selection and hiring of replacement personnel is the sole responsibility of the contractor.

3.5 SKILLS AND KNOWLEDGE REQUIRED FOR TASK II: INSTRUCTOR POSITION

Instructor personnel shall have an extensive knowledge of construction management principles including planning, estimating, material take-off, resource leveling, project site layout, techniques of foremanship and actual construction experience.

Minimum Qualifications:

Instructor personnel shall be a certified Journeyman in the area in which they are providing primary training.

Instructor personnel shall have NEC 9502/805A or other service equivalent

The Instructor shall have a minimum of 5 years experience documented through work experience from the private sector, military or both, or appropriate valid certifications equivalent to the NEC 9502/805A.

The Instructor personnel shall have the ability to operate visual information equipment

(LCD projectors, smart boards, document cameras, or other visual aid equipment) that can be utilized as training aides.

The Instructor personnel shall have experience in the use and operations of computers and other automated office equipment used to produce and grade exams, prepare reports and input/extract data.

Instructor personnel must obtain a favorable determination from a National Agency

Check Local Agency and Credit check (NACLC) investigation.

Have and maintain valid CPR qualification.

Physical Demands: Work is split between a classroom environment requiring long periods of standing and field training projects requiring prolonged standing and working in an active construction site environment. Additional physical demands require use of power hand tools, lifting or construction materials and climbing of ladders. Instructor personnel will have to maneuver on, around and under structures in the performance of their duties.

Work Environment: The work environment involves everyday risks or discomforts that require normal safety precautions typical of such places as offices, classrooms, training rooms, job sites and field exercises. Instructor personnel will have to take additional safety precautions when maneuvering on, around and under structures performing quality control inspections. Instructor personnel are also responsible for student safety and that students comply with safety precautions and wear proper safety equipment as needed or directed when in a training environment, construction project site or field exercise.

3.5.1 SPECIFIC KNOWLEDGE REQUIREMENTS

Builder Apprentice/Builder Advanced Instructor: Instructor personnel shall have documented experience in light frame structure, suspended ceiling tile, hot tar roofing, three tab composition shingles, concrete masonry structure, installing/finishing drywall, preparing/installing doors and casing, baseboard/molding, installing composite floor tile, ceramic tile, painting, mixing, transporting, placing and finishing concrete at a master level. Due to class size and safety requirements, the BU-A course requires 2 instructors be present for each day of instruction from commencement of the course until graduation. There is no wavier for the 2 instructor requirement for the BU-A course of instruction paragraph 3.2.1.

Equipment Operator: Advanced Instructor: Instructor personnel shall have documented experience in soil stabilization and asphalt placement utilizing grading and paving equipment.

The equipment operator shall possess all valid licenses and certifications for the equipment in which they are providing training on. The list of equipment is in Addendum III. The Instructor personnel shall have a minimum of 5 years experience with construction equipment.

Documented experience is required for each piece of equipment for which the Instructor personnel is providing training. Instructor personnel are designated by the command to conduct all Equipment Operator training. Equipment Operator courses include paragraphs 3.2.12.

Steelworker Apprentice/Advance Instructor: Instructor shall be a skilled welder with documented experience in metal identification. Experience with Gas Metal Arc (GMA) welding, Gas Tungsten Arc (GTA) welding, read and interpret welding symbols, braze and solder, Shielded Metal Arc Welding (SMAW), operate and maintain power shears, lay out, erect, inspect and test riggings and hoisting devices at a masters level or equivalent. Instructor shall have a minimum of 10 years steelworker/welding experience. Instructor personnel are designated by the command for the Advanced Steel Worker School that consist of the following courses under paragraphs 3.2.17, 3.2.18, 3.2.19, 3.2.20, 3.2.21, 3.2.22, 3.2.23, and 3.2.24.

Physical/Environmental Demands: Instructor personnel during field exercises must deal with extreme weather/outdoor seasonal conditions associated with training performed exclusively in an outdoor environment requiring prolonged periods wearing chemical and radiological equipment.

3.6 PERFORMANCE OBJECTIVES

TASK

Performance

Objective Performance

Standards Frequency Acceptable

Quality level

(AQL)

Surveillance Method

3.1

Respond to all inquiries pertaining to NCTC Gulfport Seabee basic, intermediate and advance course offerings.

All scheduling

All inquiries will be handled in a prompt, courteous and professional manner.

Scheduling will

Continual

100% of inquiries received by the contractor will be responded to. The number of inquires responded to that meet with customer satisfaction will vary depending on the complexity and nature of the inquiry.

All course related

Customer feedback.

requirements for courses will be drafted, approved, disseminated in advance of scheduled course start dates.

Attend scheduled meetings related to NCTC course scheduling, assist in providing course cost estimates, and assist in the resolution of all scheduling related conflicts that arise.

consist of all course related material, rosters, and instructors assigned and will be made available in advance of course start date.

All scheduled meetings pertaining to course scheduling will be attended.

Scheduling conflicts identified will be addressed promptly and resolved in a manner as to not disrupt ongoing courses.

material and facilities will be available on the course start date.

Meetings scheduled will be attended on time. Scheduling conflicts, problems, or issues will be identified and resolved within 48 hours.

Customer review of schedules, Meeting attendance logs, and instructor feedback.

TASK

Performance Objective Performance

Standards Frequency Acceptable

Quality level

(AQL)

Surveillance Method

3.2.1 through 3.2.25

Conduct scheduled NCTC training at Naval…