DOR_Chlorine_Recovery_Vessels_R2.docx

DESCRIPTION OF REQUIREMENTS

Purchase of Chlorine Recovery Vessels for Containment of Leaking Chlorine Cylinders

1.0 ABBREVIATIONS

2.0 INTRODUCTION

NBGB has up to thirty (30) 150lb compressed gaseous chlorine cylinders that are used to treat drinking water. If one of these cylinders begins to leak and an emergency kit is unable to stop the leak, the cylinder is placed in a specially designed recovery vessel to contain the leak.

3.0 REQUIREMENTS

3.1 The supplier shall provide three (3) chlorine recovery vessels for 100lb and 150lb gaseous chlorine cylinders.

4.0 DELIVERABLES

4.1 Chlorine Recovery Vessel

4.1.1 The recovery vessel shall be able to house and contain a leaking 150lb chlorine cylinder, up to 59 inch overall height and 10.75 inch diameter.

4.1.2 The recovery vessel shall meet U.S. Federal Regulatory Standard CFR 49 173.3 – Packaging and Expectations.

4.1.3 The chlorine recovery vessel shall meet the following pressure ratings and the certifications shall be displayed on a placard affixed to the vessel and door:

4.1.3.1 The vessel shall be tested at 375PSIG.

4.1.3.2 The vessel shall be pressure tested at 300℉ to 250 psi MAWP.

4.1.3.3 The vessel shall be pressure tested at 300℉ to 15 psi external MAWP.

4.1.3.4 The vessel shall be pressure tested at -20℉ to 250 psi MDMT.

4.1.4 The chlorine recover vessels shall have wheels for easy transportation to the site of the leaking chlorine tank.

4.1.5 A Viton gasket will be used to seal the door.

5.0 DELIVERY LOCATION

C/O PORTUS

Blount Island marine Terminal 8998 Blount Island Blvd Jacksonville, Fl 32226

5.1 Delivery Address:

C/O PORTUS

Blount Island marine Terminal 8998 Blount Island Blvd Jacksonville, Fl 32226

5.2 SPECIAL DELIVERY INSTRUCTIONS

Delivery driver will need a TWIC badge or will have to pay a TWIC escort.

Package must be marked as follows:

Deliver To:

C/O PORTUS

Blount Island marine Terminal 8998 Blount Island Blvd Jacksonville, Fl 32226

Marked For:

FFT: PWD GTMO

ATTN: Patricia Loop, Office: 5709 Cell: (904)294-3436

5.3 INSPECTION REQUIREMENTS

5.3.1 Check placards to verify certifications.

5.3.2 Inspect the exterior for signs of damage and rust.

5.3.3 Open and close door to ensure hinges operates without impediment.

5.3.4 Inspect interior of tank for signs of damage and rust

5.3.5 Inspect gaskets to confirm they are the proper material and in good working condition.

2 | Page