French Spreader SOW SAM Update.docx
DOCX document 26 KB Posted
- Attached to
- Alloy Steel Raw Material 4340 IAW AMS 6414
- Solicitation number
- N68335-24-Q-0193
About this file
This document is a Statement of Work (SOW) for the procurement of Alloy Steel Raw Material 4340 IAW AMS 6414 by the Naval Air Systems Command (NAVAIR) for use in the manufacture of a critical safety item and as part of a system supporting the launch and/or recovery of aircraft.
The SOW specifies the required material size, quantity, and certifications. It also outlines the applicable specifications, heat treatment requirements, and government inspection and acceptance criteria. The packaging, preservation, and shipping instructions are provided, with the destination being the NAVAIR Lakehurst Staging Facility. The related Federal Contract Opportunity solicitation N68335-24-Q-0193 is for a firm-fixed price procurement of this material, with award to be made to the offeror whose quotation is technically acceptable and lowest priced. Proposals are due by 4:00pm EST on October 4, 2024 and should be submitted electronically to the Contracting Officer, Jeff Chelston.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Copy of CLIN Structure French Spreader.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for Alloy Steel Raw Material 4340 IAW AMS 6414 12/14/23
a) SCOPE
This statement of work (SOW) is for the Firm Fixed Price procurement of steel raw material, in accordance with the specifications and dimensions provided herein. This procurement includes all associated certifications and test reports. This material will be used in the manufacture of a critical safety item and will be used as part of a system supporting the launch and/or recovery of aircraft.
b) REQUIREMENTS
2.1 General
The contractor shall provide the following material, size, and quantity:
1. Alloy steel forging, 4340, rough machined to 5.0” X 5.5” X 31.25” Qty. 3
The following certifications are required:
a) Raw material certification:
1) Material and original mill certifications are required and must be in English.
2) Material must be DFARS Compliant.
b) Heat treatment certification.
c) Certificate of conformance to cross forging requirement.
2.2 Specifications
1) Material shall be in accordance with 4340 per AMS6414.
2) Heat treat in accordance with AMS 2759/1 so that finished part has a Brinell hardness of 376HBW to 420HBW.
3) The parts must be crossed forged with the grain to run with the rough machined thickness of 5.00 inches.
2.3 Government Inspection and Acceptance
Government Inspection and Acceptance of all units shall be accomplished at the destination.
3.0 PACKAGING, PRESERVATION AND SHIPPING
Packaging and preservation for shipping shall be in accordance with best commercial practices. Shipments shall be packaged and transported (FOB Destination) via safe, secure, reliable, and traceable means of transportation and provide protection from normal climatic/weather conditions and incidental mishandling during shipping to prevent any damage or loss during shipment. All shipments under this contract shall be addressed to the NAVAIR Lakehurst Staging Facility as indicated below:
Naval Air Warfare Center, Aircraft Division Highway Route 547 Building 148 Joint Base MDL, New Jersey 08733
4.0 POINTS OF CONTACT
Acquisition Point of Contact:
__Jeff Chelston_____________________________ Naval Air Warfare Center, Aircraft Division Highway 547 Joint Base MDL, NJ 08733-5104 Telephone: (240) 577-5754 E-Mail Address: jeffrey.m.chelston.civ@us.navy.mil
File details come from the government source that posted it. Updated .