Statement_of_Requirements.docx

FAA certified L-861T(L), Mode 1, LED Taxiway Light in accordance with FAA AC 150/5345-46E, that includes the following components:

· System must be manufactured by a Certified Airport Lighting Equipment Manufacturer per FAA Advisory Circular 150/5345-53D

· 1 – L-861T LED Taxiway Light Unit

· Current controlled between 2.8A and 6.6A internally to the Light Unit

· Light Unit shall contain an arctic kit with an integral temperature cut-off switch

· Each Taxiway Light Unit must be able to be powered from FAA L-830-1 and L-830-2 Isolation Transformers

· Maximum weight is 15 pounds per complete Taxiway Light (Light Unit, riser tube, frangible, and floor flange)

· Each Light Unit must be installed with a single riser tube

· Maximum height is 14” including riser tube, frangible coupling and Floor Flange

· Light Fixture Lead must exit the Taxiway Light Unit prior to the riser tube. Fixture Lead exiting at the Light Unit and riser tube interface is acceptable provided the environmental resistance has not been compromised.

· 1 – riser tube

· 1 – frangible coupling

· must be able to thread into a Cooper Crouse Hinds Floor Flange

· 1 – Floor Flange (Cooper Crouse Hinds, P/N# 25684-1)