Amplifiers Sec J Att 1_Tech Spec CR Matrix RFP.xls
XLS spreadsheet 38 KB Posted
- Attached to
- Multiple Award BPA for Amplifiers
- Solicitation number
- N68335-09-R-0073
About this file
Section J Attachment 001
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BPA CDRL A001.doc | DOC document | |
| Section J Attachment 002.xls | XLS spreadsheet | |
| N68335-09-R-0073 final.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UHF SATCOM Amp
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| Ultra High Frequency Satellite Communications (UHF SATCOM) Amplifier | |||
| support power outputs ranging from 50 to 150 watts | 4.1(a) | ||
| support transmit frequencies ranging from 290 to 318 MHz and receive frequencies of 243-270 MHz | 4.1(b) | ||
| support a DC primary power of 24 volts | 4.1(c) | ||
| impedance of 50 ohms | 4.1(d) | ||
| DAMA capable | 4.1(e) | ||
| weight, ruggedness, and JITC specs | 4.1(f) | ||
| **To be completed by the Government's Technical Evaluator |
&C&"Arial,Bold"&12Technical Specification Cross-Reference Matrix Attachment 1 &C&P
UHF SATCOM High Power Amp
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| UHF SATCOM (High Power) Amplifier | |||
| support power outputs ranging from 50 to 150 watts | 4.2(a) | ||
| support transmit frequencies ranging from 290 to 318 MHz and receive frequencies of 243-270 MHz | 4.2(b) | ||
| support a DC primary power of 24 volts | 4.2(c) | ||
| impedance of 50 ohm | 4.2(d) | ||
| DAMA capable | 4.2(e) | ||
| weight, ruggedness, and JITC specs | 4.2(f) | ||
| **To be completed by the Government's Technical Evaluator |
&C&"Arial,Bold"&12 Technical Specification Cross-Reference Matrix Attachment 1 Page &P
Multi-Mode Multi Band Amp
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| Multi-mode/Multi-band Amplifier | |||
| support an inclusive frequency range of 30 to 512 MHz or 108 to 512 MHz, LOS and cross over both VHF and UHF frequencies | 4.3(a) | ||
| 50W LOS min. and 150W min. UHF SATCOM mode | 4.3(b) | ||
| DC primary power of 24 volts | 4.3(c) | ||
| impedance of 50 ohm | 4.3(d) | ||
| DAMA capable | 4.3(e) | ||
| weight, ruggedness, and JITC specs | 4.3(f) | ||
| **To be completed by the Government's Technical Evaluator |
&C &"Arial,Bold"&12Technical Specification Cross-Reference Matrix Attachment 1 Page &P
HF Amp
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| High Frequency(HF)/ Amplifier | |||
| run on 24 volts of DC power, or120/240 VAC or 208 three phase VAC power | 4.4(a) | ||
| support a range in and/or including 125 to 400 watts if DC powered or 1,000 to 10,000 watts if AC powered | 4.4(b) | ||
| support a frequency range from 2 to 30 MHz for HF | 4.4(c) | ||
| impedence of 50 ohm | 4.4(d) | ||
| weight, ruggedness, and JITC specs | 4.4(e) | ||
| **To be completed by the Government's Technical Evaluator |
&C &"Arial,Bold"&12Technical Specification Cross-Reference Matrix Attachment 1 Page &P
Accessories
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| Accessories: The accessories shall contain, but are not limited to, pre-amps, cables, connectors, vehicular and rack mounts, control cables, removable remote control panels, low pass filter kits, amplifier controls, speakers, Bias-Tee, and proprietary equipment necessary for amp function. All accessories shall only come from the same source as the amplifier; no third party accessories are desired on this contract. | 4.5 | ||
| **To be completed by the Government's Technical Evaluator |
&C &"Arial,Bold"&12Technical Specification Cross-Reference Matrix Attachment 1 Page &P
Bundles
| Offeror: | |||
| Product: | |||
| Major Product Group (CLIN) Requirements | RFP Section C SOW Paragraph 4.0 Specifications | Proposal Cross-Reference/Product Literature | **Proposal Compliant With Specifications Yes/No |
| Bundles: The contractor shall provide amplifier bundles to SCR Division in order to develop new, enhance, or augment existing C4ISR Electronic Systems. The bundles shall contain, any and all pieces of equipment for a specific amplifier to function and shall include any and all price cuts and/or package deals. | 4.6 | ||
| **To be completed by the Government's Technical Evaluator |
&C &"Arial,Bold"&12Technical Specification Cross-Reference Matrix Attachment 1 Page &P
File details come from the government source that posted it. Updated .