N68335-26-Q-1069 Cart Adapter.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

FMS Requirement

Created On:

09 Sep 2026, 18:51 PM Greenwich Mean Time

Section A - Solicitation/Contract Form

PMA299 FMS; (GR-P-SCK)- 70700-77200-041 (New Contract)

SUPPLEMENTAL INFORMATION

This solicitation is a 100% Small Business Set-Aside. The solicitation package is intended to competitively procure the manufacture, assembly, inspection, and delivery of one (1) Cart Adapter, P/N 70700-77200-041, in support of the Greece Hellenic Navy MH-60R Aircraft Program under Foreign Military Sales (FMS) Case GR-P-SCK.

It is anticipated that this solicitation will result in a single award purchase order type contract.

IMPORTANT INFORMATION: Registration in the Department of Defense (DoD) System for Award Management (SAM) database will be a prerequisite for receiving an award. For more information on the SAM database, refer to the SAM website at https://www.sam.gov/portal/public/SAM.

Proposal validity shall be for 120 days.

RELEASE OF TECHNICAL DATA PACKAGE INFORMATION: Drawing Packages, associated with the solicitation, will NOT be posted with the Request For Proposal and must be obtained through this office. This program includes information that is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for "sensitive" or "controlled" technologies regulated by the U.S.

Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S. persons to foreign persons as defined under the U.S. Department Of State website: https://www.pmddtc.state.gov/ddtc_public

Drawing Packages are export controlled. Contractors interested in receiving the necessary technical data for proposal purposes, must submit a valid, current DD Form 2345 Military Critical Technical Data Agreement to this office. The DD Form 2345 must be on file with the United States/Canada Joint Certification Office. For more information please visit https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx. Interested Firms shall submit a written request for a copy of the Technical Data Package through Mr. Kyle Welge at: kyle.a.welge.civ@us.navy.mil. To obtain a copy of Drawing Packages, the written request must be submitted to this office and must include the name of your company, mailing address, phone number, email address, current CAGE number and a copy of current DD Form 2345. Only Offerors who have requested a drawing package and have a valid and current DD Form 2345 will be considered for award.

Contractor Responsibility - Cybersecurity Maturity Model Certification (CMMC) Access to Controlled Unclassified Information

a) The technical data package contains CUI.

b) This solicitation includes DFARS 252.204-7025, Notice Cybersecurity Maturity Model Certification Requirements.

c) Offerors must obtain access to the CUI drawing package in order to prepare a proposal and must possess a current and valid CMMC Level 2 (Self) certification at the time of contract award.

d) Access will be granted only to entities that demonstrate:

1) Current and valid CMMC Level 2 (Self); and

2) Compliance with applicable safeguarding requirements; and

3) Valid DD Form 2345.

e) The Government will verify CMMC status in the Supplier Performance Risk System (SPRS) prior to releasing the CUI materials.

f) Failure to maintain the required CMMC Level 2 (Self) prior to award will render the Offeror ineligible for award.

g) By submission of a proposal, the Offeror represents that, if selected for award, it will possess the required CMMC Level 2 (Self) certification at the time of award.

h) If the Offeror intends to utilize subcontractors that will process, store, or transmit FCI or CUI, the Offeror shall ensure such subcontractors possess the required CMMC level prior to award of subcontracts, in accordance with DFARS clause requirements.

i) The Government will verify that the apparently successful offeror possesses the required CMMC Level 2 (Self) prior to award.

j) An Offeror that does not possess the required CMMC Level 2 (Self) at the time of award will be ineligible for award.

k) In order to be eligible for award the offeror must obtain access to the CUI drawing package by submitting a valid DD Form 2345 and a Current and valid CMMC Level 2 (Self).

l) Failure to obtain the CUI drawing package will render the Offeror ineligible for award.

m) Compliance with the above is a material condition of award.

POINT OF CONTACT (POC)

NAWCAD LKE Procurement: Kyle Welge, kyle.a.welge.civ@us.navy.mil

N6833526Q1069

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Cart Adapter Part Number: 70700-77200-041

NSN: 4920- 01-158-5701

FMS Greece Hellenic Navy MH-60R Aircraft Program FMS Case: GR-P-SCK

RSN: 036

PLDI: 36B000

MILSTRIP: [TBD]

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

1 Each

Section C - Description/Specifications/Statement of Work

STATEMENT OF WORK

FOR THE PRODUCTION OF

FUEL CELL & VENTILATING REPAIR SYSTEM,

PART NUMBER (P/N) 70700-77200-041

1.0 INTRODUCTION

This Statement of Work (SOW) addresses requirements and tasks associated with production and delivery of the following item for the Foreign Military Sales (FMS) MH-60R program.

NOMENCLATURE NSN PART NUMBER QTY

CART ADAPTER 4920-01-158-5701 70700-77200-041 1

2.0 APPLICABLE DOCUMENTS

a) DFARS 252.211-7003 Item Unique Identification and Valuation

b) MIL-STD-130N Identification Marking of U.S. Military Property

c) MIL-STD-2073-1E - Standard Practice for Military Packaging

d) MIL-STD-129R - Military Marking for Shipment and Storage

e) MIL-STD-1366E DOD Interface Standard for Transportability Criteria

3.0 REQUIREMENTS

3.1 General

The Contractor shall manufacture and deliver the part number identified in Section 1.0 above in accordance with this SOW and the requirements of the contract. Delivery required within 75 weeks after receipt of order (ARO).

3.2 Quality Assurance

The Contractor shall have in place a production quality assurance (QA) system. This QA system shall be able to ensure that manufactured configuration items are built to print, functional, and reliably made IAW controlling technical drawings, specifications, and standards. Each item manufactured as part of this contract shall have passed a Government final inspection prior to DD-250.

3.3 Government Inspection and Acceptance

Representatives of Defense Contract Management Agency (DCMA) shall accomplish government Inspection and Acceptance of all production units at the source.

3.4 Item Unique Identification (IUID) Marking of US Military Property In accordance with DFARS Clause 252.211-7003 Item Identification and Valuation, the Contractor is required to mark and register all end items and their components meeting the requirements called out in MIL-STD-130N. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

3.4.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID may be either UID Construct #1 or Construct #2 with Construct #2 being the preferred method.

3.4.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part.

3.4.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-STD-130N.

3.4.4 UID Registration

The prime Contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry. Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at .

3.4.5 Records

The Contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the Government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked, and the registration method used.

3.5 Packaging, Handling, Storage and Transportation

3.5.1 Packaging Requirements

Preserve, and pack for shipment in accordance with the MIL-STD-2073-1E, "Standard Practice for Military Packaging," using the detailed Packaging Requirements Code specified below.

Packaging Requirements Code:

PN MOP CL PM WM CM CT UC QUP

70700-77200-041 10 1 00 FA LK 0 F2 001

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) is prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standard for Phytosanitary Measures (ISPM) 15, "Regulation of Wood Packaging Material in International Trade."

3.5.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc) shall be applied to all units, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit and removal from the pack.

3.5.3 Transportation

Ensure safe transportation of packaged items at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized:

(a) Postal Regulations

(b) Department of Transportation Regulations

(c) Civil Air Regulations

(d) Uniform Freight Classification Rules

(e) National Motor Freight Classification Rules

(f) American Truckers' Association Rules

(g) Other applicable carriers' rules

(h) Military Air Regulations for dangerous materials

Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be unitized in accordance with ASTM D3951-18.

Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment.

Shipments by parcel post shall comply with Postal Regulations.

TRANSPORTATION ASSISTANCE - FOB ORIGIN

To obtain transportation assistance for an upcoming shipment, contractors are to follow the appropriate directions listed below, based on the terms and conditions of the specific contract.

1. For all contracts administered by a Defense Contract Management Agency (DCMA) office (as shown on page 1 of the contract, or in a subsequent modification), contractors are to contact the transportation office at that DCMA. If the DCMA transportation office is unable to provide assistance, contractors may contact NAVSUP WSS Code N9833 (usn.philadelphia.navsupwssphil.mbx.n9833-customer--service@us.navy.mil) or call (215) 697- 2715.

To arrange transportation via DCMA:

Please log into eTools with your User ID at http://etools.dcma.mil and click on the External Web Access Management (EWAM) icon. If you don't have an account, you'll need to create one for their Shipment Instructions Request (SIR) website at http://etools.dcma.mil. To access the SIR tool first go to the URL http://www.dcma.mil and click on the menu item "e-BUSINESS" which will take you to a new menu page which has DCMA e-tools.

Under "Shipment Instructions Request" there are three additional menu items; "Overview", "How to Use' and "How to Access." When you click on "How to Access" you will be taken to the Register in EWAM logon page. Your user id and password will be good for DCMA administered contracts within the United States. If a new user cannot find his organization or company name in the pick list, he should go all the way down to the bottom of the list and click on "Other"; the word Other followed by three dots. This will allow the user to type in the name of his company. When you have a user id and password you will then complete an SIR request for shipment processing by the Transportation office. If you need help using either EWAM or the SIR e-tool, there are tutorials that can be accessed by clicking on the "How to Use' button. You can contact their IT helpdesk at 1-888- 576-DCMA for assistance.

3.6 Shipment and Delivery

NOTE: Shipment earlier than the delivery date specified in this contract is authorized and requested whenever possible.

Contractor shall contact Freight Forwarder to arrange shipment of item to the destination provided in paragraph 3.6.1 only after completion of inspection, acceptance, and packaging, with appropriate shipping documents.

3.6.1 FMS Country-Specific Delivery Requirements and Shipping Address

Ship To MAPAC and address:

MAPAC: PGR002

ITC International 500 Ocean Avenue East Rockway, NY 11518, USA Tel:

POC: [TBD

(000)-000-000

Mark For: PGRP00 Hellenic Navy Supply Center Central Receiving Directorate Customs Department (Code 1420)

[TBD]

12462 Skaramagkas, Athens Greece

PH:

Supplementary Address: PA2SCK

3.6.2 Shipping Notification A Customer shipping notification via email is required to be sent to the Acquisition Point of Contact listed in Paragraph

5.1 when the item is shipped and must include tracking number, part number and serial number of the item.

4.0 POINTS OF CONTACT

NOTE: If during the execution of this contract, it becomes necessary to contact the Technical Point of Contact please ensure the Acquisition Point of Contact is copied on the email so they can be kept apprised of any potential issues.

4.1 Acquisition Point of Contact:

[TBD]

Naval Air Warfare Center, Aircraft Division - Lakehurst Joint Base MDL, NJ 08733-5104 E-Mail Address:

4.2 Technical Point of Contact:

[TBD]

Naval Air Warfare Center, Aircraft Division - Lakehurst Joint Base MDL, NJ 08733-5104 E-Mail Address:

Requirements PMA299 FMS; (GR-P-SCK)- 70700-77200-041 (New Contract) for Organization APM299 FY: 2026, AMS:

N68335-26-SIMACQ-APM299-0134

Additional Regulation or Supplemental Clauses Incorporated by Full Text

CTXT.211-9510 CONTRACTOR EMPLOYEES (NAVAIR) (May 2011)

(a) In all situations where contractor personnel status is not obvious, all contractor personnel are required to identify themselves to avoid creating an impression to the public, agency officials, or Congress that such contractor personnel are Government officials. This can occur during meeting attendance, through written (letter or email) correspondence or verbal discussions (in person or telephonic), when making presentations, or in other situations where their contractor status is not obvious to third parties. This list is not exhaustive. Therefore, the contractor employee(s) shall:

(1) Not by word or deed give the impression or appearance of being a Government employee;

(2) Wear appropriate badges visible above the waist that identify them as contractor employees when in Government spaces, at a Government-sponsored event, or an event outside normal work spaces in support of the contract/order;

(3) Clearly identify themselves as contractor employees in telephone conversations and in all formal and informal written and electronic correspondence. Identification shall include the name of the company for whom they work;

(4) Identify themselves by name, their company name, if they are a subcontractor the name of the prime contractor their company is supporting, as well as the Government office they are supporting when participating in meetings, conferences, and other interactions in which all parties are not in daily contact with the individual contractor employee; and

(5) Be able to provide, when asked, the full number of the contract/order under which they are performing, and the name of the Contracting Officer's Representative.

(b) If wearing a badge is a risk to safety and/or security, then an alternative means of identification maybe utilized if endorsed by the Contracting Officer's Representative and approved by the Contracting Officer.

(c) The Contracting Officer will make final determination of compliance with regulations with regard to proper identification of contractor employees.

Section D - Packaging and Marking

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DTXT.247-9508 PROHIBITION AND LIMITATIONS FOR PACKAGING MATERIALS (NAVAIR) (Aug 2019)

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standards for Phytosanitary Measures (ISPM) 15:2009, "Regulation of Wood Packaging Material in International Trade."

DTXT.247-9510 PRESERVATION, PACKAGING, PACKING AND MARKING FOR FOREIGN

MILITARY SALES (FMS) REQUIREMENTS (NAVAIR)

(Oct 2005)

(a) Unless specified elsewhere in the contract, packing and packaging shall comply with MIL-STD-129. Packing and packaging materials shall provide protection from abuse during handling and from environmental, magnetic, and electrical damage during handling and subsequent future storage, possibly under less than desirable conditions.

(b) Marking: All unit and exterior containers/packs shall as a minimum be marked as follows:

(1) FMS Case Number.

(2) Part Number (with CAGE Code).

(3) For - the organization/address the material is shipped to.

(4) The applicable MILSTRIP number (identified separately for each line item of the contract/delivery order)

(5) Project Code number.

(6) Project Directive Line Item (PDLI) Number.

(7) Requisition Serial Number (RSN).

(8) Quantity.

(9) From - the contractor's address shipped from.

(10) Ship to - the shipping address provided in the contract.

(11) Transportation Priority

(12) Required Delivery Date

(c) The contractor shall affix labels to the outside of each external pack warning all handlers that fragile, delicate, etc., equipment is contained within and to warn against particular improper handling and storage procedures/conditions as may be applicable to the item

(s) ordered.

Section E - Inspection and Acceptance

ETXT.246-9512 INSPECTION AND ACCEPTANCE (NAVAIR) (Oct 2005)

(a) Inspection and acceptance of the supplies or services to be furnished hereunder shall be performed by [ ]TBD .

(b) Acceptance of all Contract Line Items/Sub Line Items (CLINs/SLINs) shall be made by signature of the accepting authority on a DD Form 250 submitted through the WAWF system. Acceptance will only occur when the accepting authority is sure that inspections performed demonstrate compliance with contract requirements.

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Source Instructions: Please note that DoDAAC N68335 and associated address is a placeholder for CLIN 0001 as inspection and acceptance is at Origin and the Contractor/Local DCMA Office is unknown due to this effort being solicited on a competitive basis. The DoDAAC and all associated data will be updated to the appropriate local DCMA Office within the Contract.

DoDAAC: N68335 CountryCode: USA

NAVAIR WARFARE CTR AIRCRAFT DIV

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

TBD, TBD

Email: TBD

Section F - Deliveries or Performance

Overall Contract Delivery Period

From date of lead time event to delivery 75 Weeks Date of Award

Government Origin (Shipping Point)

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to delivery 75 Weeks Date of Award

1 Each Ship To

MAPAC: PGR002

CountryCode: USA

ITC INTERNATIONAL

500 OCEAN AVENUE, EAST

ROCKAWAY, NY 11518

EAST ROCKAWAY, NY 11518

UNITED STATES

[TBD], Military FSO Email: [TBD]

FoB Details Government Origin (Shipping Point)

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-15 Stop-Work Order. Aug 1989 52.242-17 Government Delay of Work. Apr 1984 52.247-29 F.o.b. Origin. Feb 2006

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FTXT.225-9506 VERIFICATION OF "SHIP TO" AND/OR "NOTICE OF AVAILABILITY"

ADDRESS (NAVAIR)

(Jan 1992)

The contractor shall submit a request in duplicate to the Transportation Office of the cognizant Contract Administration Office for verification of the "Ship to" address. If the offer/release instructions require a "Notice of Availability" the contractor shall also request verification of the address to which notification will be made (the 'IAC 3' address). Such requests shall be submitted at least ten (10) days in advance of (i) date Notice of Availability is to be submitted, or (ii) actual shipping date, if shipment is to be released automatically.

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC N68335

Admin DoDAAC TBD

Inspect By DoDAAC TBD

Ship To Code PGR002

Ship From Code TBD

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

GTXT.242-9511 CONTRACT ADMINISTRATION DATA (NAVAIR) (Nov 2017)

(a) Contract Administration Office.

(1) Contract administration functions (see FAR 42.302(a) and DFARS 242.302(a)) are assigned to: See the ADMINISTERED BY Block on the face page of the contract, modification, or order.

(b) Special Instructions (see FAR 42.202(b) and (c)):

(1) The following contract administration functions are retained (see FAR 42.302(a) and DFARS 242.302(a)):

Functions Retained Retained for Performance By:

[ ] N/A [ ]N/A

(2) The following additional contract administration functions are assigned (see FAR 42.302(b)):

Additional Functions Retained for Performance By:

[ ]N/A [ ]N/A

(c) Inquiries regarding payment should be referred to: MyInvoice through the Wide Area Workflow eBusiness Suite: https://wawf.eb.mil/.

Section H - Special Contract Requirements

HTXT.216-9512 PAPERLESS CONTRACTING (NAVAIR) (Jun 2009)

(a) Orders and requests for proposals are hereby authorized to be issued by facsimile or by electronic commerce (including e-mail and paperless methods of delivery). Nothing in this contract should be read to prohibit these types of orders. In the event of a conflict with any other provision of this contract, this clause shall govern.

(b) To the extent the terms "written", "mailed", or "physically delivered" appear in other provisions of this contract, these terms are hereby defined to explicitly include electronic commerce, email, or paperless delivery methods.

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026- O0038)

Feb 2026

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.211-5 Material Requirements. (Deviation 2026-O0038) Feb 2026 52.211-15 Defense Priority and Allocation Requirements. Apr 2008

52.213-4 Terms and Conditions-Simplified Acquisitions (Noncommercial). (Deviation 2026- O0038)

Feb 2026

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0038) Apr 2026 52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-1 Payments. Apr 1984 52.232-8 Discounts for Prompt Payment. Feb 2002 52.232-11 Extras. Apr 1984 52.232-24 Prohibition of Assignment of Claims. May 2014 52.232-25 Prompt Payment. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026-O0038) Feb 2026 52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

52.247-68 Report of Shipment (REPSHIP). Feb 2006 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form). Apr 1984 52.253-1 Computer Generated Forms. (Deviation 2026-O0038) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7000 Disclosure of Information. Oct 2016 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7028 Exclusionary Policies and Practices of Foreign Governments. Apr 2003 252.225-7036 Buy American-Free Trade Agreements--Balance of Payments Program. Feb 2024 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.232-7010 Levies on Contract Payments. Dec 2006

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.243-7001 Pricing of Contract Modifications. Dec 1991 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-O0038) (Feb 2026)

Postaward Small Business Program Rerepresentation (Feb 2026) (Deviation 2026-O0038)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or Affiliates a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code assigned to contract number.333514 [TBD]

(2) [ .] The Contractor represents that Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause it [ ] is, [ ] is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Contractor represents that it [ ] is, [ ] is not a joint Women-owned small business (WOSB) joint venture eligible under the WOSB Program venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __.]

(4) . The Contractor represents that it [ ] is, [ ] is not a joint Economically disadvantaged women-owned small business (EDWOSB) joint venture venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __ .]

(5) . The Contractor represents that it [ ] Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program is, [ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) [ ] The offeror HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a HUBZone small business concern.

represents, as part of its offer, that It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [

The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business concern ____ participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's ____ name and title.]

(End of clause)

52.225-8 Duty-Free Entry. (Oct 2010)

DUTY-FREE ENTRY (OCT 2010)

(a) . "Customs territory of the United States" means the States, the District of Columbia, and Puerto Rico.Definition

(b) Except as otherwise approved by the Contracting Officer, the Contractor shall not include in the contract price any amount for duties on supplies specifically identified in the Schedule to be accorded duty-free entry.

(c) Except as provided in paragraph (d) of this clause or elsewhere in this contract, the following procedures apply to supplies not identified in the Schedule to be accorded duty-free entry:

(1) The Contractor shall notify the Contracting Officer in writing of any purchase of foreign supplies (including, without limitation, raw materials, components, and intermediate assemblies) in excess of $20,000 that are to be imported into the customs territory of the United States for delivery to the Government under this contract, either as end products or for incorporation into end products. The Contractor shall furnish the notice to the Contracting Officer at least 20 calendar days before the importation. The notice shall identify the-

(i) Foreign supplies;

(ii) Estimated amount of duty; and

(iii) Country of origin.

(2) The Contracting Officer will determine whether any of these supplies should be accorded duty-free entry and will notify the Contractor within 10 calendar days after receipt of the Contractor's notification.

(3) Except as otherwise approved by the Contracting Officer, the contract price shall be reduced by (or the allowable cost shall not include) the amount of duty that would be payable if the supplies were not entered duty-free.

(d) The Contractor is not required to provide the notification under paragraph (c) of this clause for purchases of foreign supplies if-

(1) The supplies are identical in nature to items purchased by the Contractor or any subcontractor in connection with its commercial business; and

(2) Segregation of these supplies to ensure use only on Government contracts containing duty-free entry provisions is not economical or feasible.

(e) The Contractor shall claim duty-free entry only for supplies to be delivered to the Government under this contract, either as end products or incorporated into end products, and shall pay duty on supplies, or any portion of them, other than scrap, salvage, or competitive sale authorized by the Contracting Officer, diverted to nongovernmental use.

(f) The Government will execute any required duty-free entry certificates for supplies to be accorded duty-free entry and will assist the Contractor in obtaining duty-free entry for these supplies.

(g) Shipping documents for supplies to be accorded duty-free entry shall consign the shipments to the contracting agency in care of the Contractor and shall include the-

(1) Delivery address of the Contractor (or contracting agency, if appropriate);

(2) Government prime contract number;

(3) Identification of carrier;

(4) Notation "UNITED STATES GOVERNMENT, [agency], Duty-free entry to be claimed pursuant to Item No(s) [from Tariff ____ ____ Schedules], Harmonized Tariff Schedules of the United States. Upon arrival of shipment at port of entry, District Director of Customs, please release shipment under and notify [cognizant contract administration office]for execution of Customs Forms 7501 and 7501-A and any 19 CFR part 142 ____ required duty-free entry certificates.";

(5) Gross weight in pounds (if freight is based on space tonnage, state cubic feet in addition to gross shipping weight); and

(6) Estimated value in United States dollars.

(h) The Contractor shall instruct the foreign supplier to-

(1) Consign the shipment as specified in paragraph (g) of this clause;

(2) Mark all packages with the words "UNITED STATES GOVERNMENT" and the title of the contracting agency; and

(3) Include with the shipment at least two copies of the bill of lading (or other shipping document) for use by the District Director of Customs at the port of entry.

(i) The Contractor shall provide written notice to the cognizant contract administration office immediately after notification by the Contracting Officer that duty-free entry will be accorded foreign supplies or, for duty-free supplies identified in the Schedule, upon award by the Contractor to the overseas supplier. The notice shall identify the-

(1) Foreign supplies;

(2) Country of origin;

(3) Contract number; and

(4) Scheduled delivery date(s).

(j) The Contractor shall include the substance of this clause in any subcontract if-

(1) Supplies identified in the Schedule to be accorded duty-free entry will be imported into the customs territory of the United States; or

(2) Other foreign supplies in excess of $20,000 may be imported into the customs territory of the United States.

(End of clause)

52.247-1 Commercial Bill of Lading Notations. (Feb 2006)

COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)

When the Contracting Officer authorizes supplies to be shipped on a commercial bill of lading and the Contractor will be reimbursed these transportation costs as direct allowable costs, the Contractor shall ensure before shipment is made that the commercial shipping documents are annotated with either of the following notations, as appropriate:

(a) If the Government is shown as the consignor or the consignee, the annotation shall be:

Transportation is for the [name the specific agency] and the actual total transportation charges paid to the carrier(s) by the consignor or ____ consignee are assignable to, and shall be reimbursed by, the Government.

(b) If the Government is not shown as the consignor or the consignee, the annotation shall be:

Transportation is for the [name the specific agency] and the actual total transportation charges paid to the carrier(s) by the consignor or ____ consignee shall be reimbursed by the Government, pursuant to cost-reimbursement contract No. . This may be confirmed by contacting ____ ________

[Name and address of the contract administration office listed in the contract].____

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/ [Insert one or more Internet addresses]____ ____

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any (48 CFR Chapter ) clause with an authorized Defense Federal Acquisition Regulation Supplement 2 deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements.

(Nov 2025)

CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)

(a) . As used in this clause- Definitions

"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).

"Current" means-

(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-

(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR

170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and

(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date…