N6660425Q0548 PWS.pdf

v4.1_JANUARY2025

PERFORMANCE WORK STATEMENT (PWS)

Dynalec Commercial Loudspeaker Redesign

1.0 Background

C34 requires the redesign of Virginia Class (VACL) Submarine Loudspeakers manufactured by Dynalec Corporation for installation onboard U.S. Navy submarines. These loudspeakers are critical for general announcing and alarm systems.

The original 2W and 15W Loudspeakers originally used onboard Block I/II Virginia Class Submarines are obsolete and no longer manufactured. Dynalec Corporation is the OEM for the Virginia Class BLK III, IV, V and Columbia Class Submarine Alarm & Announcing System (including Mic Control Stations and Loudspeakers).

1.1 Places of Performance

Contractor facility

1.2 Authorized Users

C34

1.3 Sponsors

PMS-392

1.4 Types of Funding

OPN

2.0 Scope

The contractor shall design and deliver replacement Loudspeakers used for Block III/IV/V VACL using information provided as Applicable Documents

The contractor shall design a higher power version of the 2W Loudspeaker used for all Blocks of VACL submarines; the higher power Loudspeaker will be the same size and dimensions of the existing 2W Loudspeakers for each Block.

Replacing existing units or procuring units for new construction requires identical hardware that meets pre-existing form, fit, and function requirements to maintain system integrity and interoperability.

2.1 Program or Systems Supported

Integrated Communications System

3.0 Applicable Documents

The contractor shall perform the tasking required in Section 4.0 in accordance with (IAW) the below Applicable Documents (ADs).

NUMBER TITLE

REVISION/

DATE

APPLICABLE SOW

TASK

1 90-212, Loudspeaker 2W Assembly and

Details C 4.1.1, 4.1.2, 4.2.1,

4.2.2 2 90-213, Loudspeaker 15W Assembly and

Details D 4.1.1, 4.1.2

3 62030-410, Mounting and Outline 2W Loudspeaker

E 4.2.1, 4.2.2

4.0 Technical Requirements

4.1 Redesign of Loudspeakers

4.1.1 Using AD 3.1 and 3.2, the contractor shall develop drawings enclosures that meet the mounting constraints of both the 2W and 15W legacy loudspeaker units. The contractor shall utilize the same connectors and pinouts to facilitate form, fit, and function replacement of an existing unit with its equivalent loudspeaker.

4.1.2 The contractor shall fabricate, assemble, and test two prototype units of each variant (2W and 15W).

Deliverable: CDRL A001 Technical Drawing Package (TDP), A002 Test Procedure, A003 Test/Inspection Report

4.2 Design

4.2.1 Using AD 3.1 and 3.3, the contractor shall design, develop drawings, fabricate two variants of 6W loudspeakers with the same physical characteristics of the legacy BLK I/II and newer BLK III/IV/V 2W loudspeakers.

4.2.2 The contractor shall fabricate, assemble, and test two prototype units of each variant.

Deliverable: CDRL A001 Technical Drawing Package (TDP), A002 Test Procedure, A003 Test/Inspection Report

5.0 Reserved

6.0 Reserved

7.0 Reserved

8.0 Reserved

9.0 Reserved

10.0 Security Compliance

Controlled Unclassified Information (CUI) including Legacy FOUO and Covered Defense Information (meeting the definition of 48 CFR 252.204–7012(a)) generated and/or provided under this contract shall be marked and safeguarded as specified in DoD Instruction 5200.48, CUI available at:

https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520048p.PDF. Any product containing Covered Defense Information shall be assigned a distribution statement (distribution statements B through F) in accordance with DoDI 5230.24 (Distribution Statements on Technical Documents); and DoDI 5230.24, Enclosure 3 Procedures, available at https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/523024p.pdf

INFORMATION SECURITY: If the work is performed at the Contractor's facility, the Contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of classified information and controlled unclassified information (CUI) and to control distribution of CUI in accordance with National Industrial Security Program Operating Manual (NISPOM) codifying 32 CFR Part 117, NISPOM Rule, and SECNAV M- 5510.36B. If the work is performed at the Government's facility, the Contractor shall comply with facility policy.

CUI INCIDENT REPORTING AND RESPONSE: The Contractor shall promptly report any unauthorized, inadvertent, or illegal release or disclosure of CUI to the Contracting Officer’s Representative / Technical Point of Contact (TPOC), Procuring Contracting Officer, and the Security Office. Contractor personnel shall coordinate this effort through the relevant industry site FSO.

PUBLIC RELEASE: Any controlled unclassified information pertaining to this contract shall not be released for public dissemination, including posting to any social media sites such as Facebook or Twitter, unless it has been approved for public release by appropriate U.S.

Government authority. Proposed public releases shall be submitted for approval prior to release through the appropriate U.S. Government Office.

10.2 Operations Security (OPSEC)

OPSEC is a process that identifies critical information to determine if friendly actions can be observed by adversary intelligence systems, determines if information obtained by adversaries could be interpreted to be useful to them, and then executes selected measures that eliminate or reduce adversary exploitation of friendly critical information.

The Contractor shall develop and implement, and update and maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment, and material used or developed by the Contractor and any subcontractor during performance of the contract.

The Contractor shall be responsible for the subcontractor implementation of the OPSEC requirements. The Contractor developed OPSEC program may include Information Assurance and Communications Security (COMSEC). The OPSEC program shall be in accordance with National Security Presidential Memorandum (NSPM) 28, and at a minimum shall include:

1) Assignment of responsibility for OPSEC direction and implementation.

2) Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3) Establishment of OPSEC education and awareness training.

4) Provisions for management, annual review, and evaluation of OPSEC programs.

5) Flow down of OPSEC requirements to subcontractors when applicable.

While performing aboard Government sites, the contractor shall: comply with all OPSEC instructions and policies; include OPSEC as part of its ongoing security awareness program and take all required Agency training; Be responsive to the Supporting OPSEC Manager on a non-interference basis; and Protect sensitive unclassified information and activities, which could compromise classified information or operations, or degrade the planning and execution of operations performed by the Requiring Organization and contractor in support of the mission.

10.3 Electronic Spillage

Electronic Spillage (ES) is defined as a situation where information of higher classification than a system is authorized to process is introduced into that system, intentionally or otherwise. If a Contractor is determined to be responsible for an ES, all direct and indirect costs incurred by the Government for ES remediation will be charged to the Contractor.