N6660423Q0733 DRAFT SOW.pdf

v3.1_MARCH2023

STATEMENT OF WORK (SOW)

Unmanned Undersea Vehicle (UUV) Repair Services

1.0 Background

The Undersea Warfare (USW) Combat Systems Department (Code 25) has a requirement for the repair of a Navy-owned Unmanned Undersea Vehicle (UUV) side-scan transducers.

1.1 Places of Performance

Repair services are to be completed at the contactor’s site, located at 275 Martine Street, Suite 301, Fall River, MA

1.2 Authorized Users

NUWCDIVNPT Code 25 is the sole authorized user of this purchase order.

1.3 Sponsors

This purchase order is sponsored by OSD RNE.

1.4 Types of Funding

This purchase order will be funded using Research, Development, Test, and Evaluation for the Navy (RDTEN) funding.

2.0 Scope

The contractor shall repair one (1) Iver3 UUV, specifically for the replacement of Iver3 side scan transducers entailed within the construction of the UUV. The contactor shall remove the damaged transducers and install the replacements to integrate successfully with all other electrical components within the UUV. The contractor shall complete a factory acceptance test of the UUV to ensure all items repaired are working properly in accordance with Original Equipment Manufacturer (OEM) specifications.

3.0 Applicable Documents

The contractor shall perform the tasking required in Section 4.0 in accordance with (IAW) the below Applicable Documents (ADs).

3.1 OEM Specifications for Iver3 UUV

4.0 Technical Requirements

DRAFT

In accordance with the Applicable Documents in Section 3.0, the contractor shall complete tasking as specified in the subsections below. NUWCDIVNPT will ship one UUV to the contractor site as indicated in SOW Section 1.1. Upon receipt of the UUV as Government Furnished Property, the contractor shall complete tasking as specified below.

4.1 Iver3 UUV Transducer Repair

4.1.1 Upon receipt of UUV provided as GFP, the contactor shall remove the damaged Iver3 side scan transducers and install the replacements to integrate successfully with all other electrical components within the UUV.

The contractor shall notify the Government of scheduled factory acceptance testing (FAT) no less than 14 calendars days before the scheduled test. The Government will witness the FAT. Once the transducers have been successfully installed, the contractor shall complete FAT of the UUV to ensure all items repaired are working properly in accordance with OEM specifications. The contractor shall deliver all FAT results and a certificate of conformance.

5.0 RESERVED

6.0 RESERVED

7.0 Government Furnished Property

The Government will provide Government Furnished Property (GFP) as listed in Attachment 1.

As specified in DFARS Clause 252.211-7007, the Contractor shall prepare a Government Property Inventory Report and the GFP Baseline Report via the GFP Module of the Procurement Integrated Enterprise Environment (PIEE). Upon update of the GFP Module, the Contractor shall submit the GFP Status Report indicating the GFP Module has been updated.

Deliverable: GFP Status Report

8.0 RESERVED

9.0 RESERVED

10.0 Security Compliance

10.1 Program Protection (Unclassified)

SECURITY:

Operations Security (OPSEC)

For informational purposes only: OPSEC is a process that identifies critical information to determine if friendly actions can be observed by adversary intelligence systems, determines if information obtained by adversaries could be interpreted to be useful to them, and then executes selected measures that eliminate or reduce adversary exploitation of friendly critical information.

OPERATIONS SECURITY (OPSEC): The Contractor shall develop and implement, and update and maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment, and material used or developed by the Contractor and any subcontractor during performance of the contract. The Contractor shall be responsible for the subcontractor implementation of the OPSEC requirements. The Contractor developed OPSEC program may include Information Assurance and Communications Security (COMSEC). The OPSEC program shall be in accordance with National Security Decision Directive (NSDD) 298, and at a minimum shall include:

1) Assignment of responsibility for OPSEC direction and implementation.

2) Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3) Establishment of OPSEC education and awareness training.

4) Provisions for management, annual review, and evaluation of OPSEC programs.

5) Flow down of OPSEC requirements to subcontractors when applicable.

While performing aboard NUWC or NUWC sites, the contractor shall: comply with all OPSEC instructions and policies detailed in the NUWCDIVNPT Security Manual; Include OPSEC as part of its ongoing security awareness program and take all required Agency training;

Be responsive to the Supporting OPSEC Manager on a non-interference basis; and Protect sensitive unclassified information and activities, which could compromise classified information or operations, or degrade the planning and execution of operations performed by the Requiring Organization and contractor in support of the mission.