N6660422Q0227 Minimum Requirements.pdf

N6660422Q0227

MINIMUM REQUIREMENTS

The PCI Mezzanine Card (PMC) SHALL utilize a removable CompactFlash (CF) card for data recording.

The CF card SHALL be removable to allow for data extraction.

The PMC SHALL support UDMA 6 ATPI (IDE standard) mode operation.

The PMC SHALL be available for purchase for use in both Conduction or Forced Air cooling chassis.

The PMC SHALL have a typical write/record data rate of 60 MegaBytes per second.

The PMC SHALL have a typical read (data extraction) data rate of 100 MegaBytes per second.

The PMC SHALL be compatible with BOTH the GE Fanuc G4DSP-XD3 and Curtis Wright

Champ AV5 VME board families.

The PMC SHALL be compatible with, at a minimum, 16 GigaByte CF cards.

The PMC SHALL provide 32 Gigabytes of storage when a 16 GigaByte CF is installed.

The PMC SHALL shall meet all the electrical and mechanical standards for Ruggedized &

Conduction Cooled COTS IEEE 1386.1-2001 compliant PMCs.

The PMC SHALL record all data provided to it with 0% data loss and 0% data corruption.

The PMC SHALL utilize either the FAT32 or NTFS file system to format/read/write from the CF, such that reading of the CF from a standard Windows-based PC shall be possible.

The PMC SHALL not require VxWorks Operating System (OS) or application software modifications beyond providing for the loading of the “plug and play” driver.

The PMC SHALL support and be FULLY compliant with the VxWorks Operating System (OS).

The PMC SHALL be compatible with all past, current, and future Heavyweight Torpedo software builds.

As NUWCDIVNPT isolates its Operational Software with a Middleware Layer that communicates with the Radstone /GE FANUC/Curtis Wright Board Support Package (BSP), the PMC SHALL have NO impact on the Middleware or operational software beyond the need to load the "plug and play" driver at boot.