Attachment 1 - Salient Characteristics and Minimum Specifications - Amendment 0002.pdf

Naval Undersea Warfare Center Division Newport

N66604-21-Q-0078 Attachment 1 – Salient Features and Minimum Specifications

The following items are required on a brand name or equal basis:

CLIN

Item

Qty.

Salient Features and Minimum Specifications

RF Amplifier

Item No.:

10047767

Model No.:

100A400AM20

4, EA.

(1) Amplifier operating frequency band must be 4kHz to 200MHz, at a minimum.

(2) Amplifier must be able to perform MIL-STD-461G CS114 testing. See Attachment 2, Section 5.12 – Pages 63 to 71.

(3) Amplifier must be able to achieve Curves #1 - #5 as specified in Figure CS114-1 of MIL- STD-461G when using injection probes with insertion losses specified in Figure CS114-2 of MIL-STD-461G. See Attachment 2, Section 5.12 – Pages 63 to 71.

(4) Amplifier must carry input modulation to the output.

(5) Amplifier must have the ability to adjust the gain.

(6) Amplifier must have General Purpose Interface Bus (GPIB) connectivity.

(7) Amplifier input and output connectors must be N-Type.

(8) Amplifier must be able to be powered using 120VAC 60Hz power.

(9) Amplifier must weigh less than 50 pounds.

(10) Amplifier height must be 4U or less (i.e. 7" or less).

(11) Amplifier depth must not exceed 23".

(12) Must be a 100 Watt Power Amplifier, at a minimum. See Attachment 2, Appendix A – Pages 234 to 235.

NOTE: The above minimum specifications represent the requirements per unit.