BNJ 1_Redacted.pdf

v1.5_JANUARY2020

BRAND NAME SPECIFICATION

PX-10 Amplifiers & PX-H71 Sensors

DESCRIPTION OF REQUIREMENT:

The Naval Undersea Warfare Center, Division Newport;

is the Naval Sea Systems Command (NAVSEA) certified of two hundred and ten (210) PX-10 Amplifiers and two hundred and ten (210) PX-H71 Sensors to overhaul with the specifications below:

Model PX-10 Keyence Amplifier PX-H71 Keyence Sensor Quantity 210 210 Type Cable type MB Thrubeam Standard Response Time 500 μs (TURBO)/1 ms (SUPER)/4 ms

(ULTRA)/16 ms (MEGA) Red 4-eleant LED (Wavelength: 635 nm)

Output Selection LIGHTON/DARKON Indicator Operation indicator: Red LED x 2, DSC orange

LED x 1 Dual digital monitor: Dual 7segment display [Preset value (4digit green LED) and current value (4digit red LED) illuminated together, current value range: 0 to 65504, excess gain: 0 P to 999 P] Hold function: Possible to display both peak and bottom hold values.

Selectable from 5 variations.

Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] Scaling display

Detection Mode Light intensity (automatic sensitivity tracking function provided)/ [Limit light intensity/output monitor]

Turbo: 4m 13.1’ Super: 6m 19.7’ Ultra: 12m 39.4’ Mega: 20m 65.6’ Detectable object 4mm 0.16” Opaque materials

Shift Function Variable between –1999 and 9999 Timer Function Timer OFF/OFFdelay/ONdelay/

Oneshot/ONdelay,OFFdelay/ONdelay, Oneshot Timer duration selectable: 1 ms to 9999 ms Maximum error against the setting value: 10% max.

Control Input NPN opencollector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.

External Input Input time 2 ms (ON)/20 ms (OFF) min.

Interference Prevention

Up to 4 units (in all power modes)

Supply Voltage 12 to 24 VDC ripple (PP) 10% max. Class 2 Current Consumption

Standard mode: 50 mA max. at 24 V/55 mA max. at 12 V Power saving mode: 40 mA max. at 24 V/45 mA max. at 12 V

Enclosure Rating IEC: IP67/JEM: IP67/NEMA: 4X IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K

Ambient Temperature

10°C to +55°C (14 to 131°F) (No freezing) -10 to +55 °C 14 to 131 °F (No freezing)

Relative Humidity 35 to 85% (No condensation) 35 to 85 % RH (No condensation) Vibration Resistance 10 to 55 Hz double amplitude 1.5 mm 0.06"

2 hours each in X, Y and Z axis 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Materials Housing: PBT, display: PSU, display cover/connector cover: SUS304, radiator plate: SUS304, gasket: NBR

Housing ：SUS303 (Plastic parts：

PMP, POM) Lens ：BK7

Weight Approx. 100 g (Including cable) Approx. 100 g (Including cable)

The delivery requirement is 16 APR 2020 to meet FY20 Q3 thru Q4 delivery requirements.

Early deliveries and partial shipments are acceptable.

Estimated Dollar Value:

BRAND NAME SPECIFICATION :

The required Keyence PX-10 Amplifier and PX-H71 Keyence Sensor are the only components compatible with the system in respect to form, fit (dimensions and tolerances) and function. The is currently equipped with the required Keyence components and no other manufacturer produces these sensors and amplifiers. To identify, qualify, and accept alternate components would be time and cost prohibitive taking between 12 to 18 months, and incurring engineering expenses and recurring life cycle testing costs estimated at

RESELLERS:

Keyence Corporation does not require an affiliation with resellers. The following businesses are identified as Keyence product providers: AID Equipment, Powertech Controls Co, U.S. Pan American Solutions, Crestwood Technology Group, and 4 Star Electronics.

Requiring Department:

Based on the above, I recommend this acquisition be conducted on a Brand Name Specification basis. I certify the technical data which form the basis of this justification are complete and accurate.

APPROVAL:

Contracting Officer:

Based on the above, I have determined that the circumstances of the contract action deem only one source reasonably available/only this brand can fulfill the requirements. I certify that this justification is accurate and complete to the best of my knowledge and belief.