Exhibit_A_CDRLs.pdf

CONTRACT DATA REQUIREMENTS LIST

(2 DATA ITEMS)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 440 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send complete form to the Government Issuing Contracting Officer for the Contract/PR NO. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

A TDP____ ___ TM ______________________ OTHER _____X__________________________

D. SYSTEM / ITEM

Elastomer Strip-Guards

E. CONTRACT / PR NO.

1300645680

F. CONTRACTOR

1. DATA ITEM

NO.

A001

2. TITLE OF DATA ITEM

STANDARD TEST REPORT

3. SUBTITLE

STANDARD TEST REPORT

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80809B

5. CONTRACT REFERENCE

N/A

6. REQUIRING OFFICE

NUWCDIVNPT CODE 4114

7. DD 250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

LT See Block 16 See Block 16 b. COPIES

8. APP CODE D 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft

Final

N/A See Block 16 N/A N/A Reg Repro

16. REMARKS

NUWC Code 4012 1

Blk. 4: Contractor format is acceptable. NUWC Code 4013 1

Blk. 9: See Distribution Statement Addendum

Blks 10-12: The Standard Test Report for each manufactured part number, shall be delivered to

NUWCDIVNPT at time of shipment of the Elastomer Strip-Guards.

15. TOTAL ---------------

1. DATA ITEM

NO.

A002

2. TITLE OF DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-81356A

5. CONTRACT REFERENCE

N/A

6. REQUIRING OFFICE

NUWCDIVNPT CODE 4114

7. DD250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

LT See Block 16 See Block 16 b. COPIES

8. APP CODE D 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Draft

Final

N/A See Block 16 N/A N/A Reg Repro

16. REMARKS NUWC Code 4012 1

NUWC Code 4013 1

Blk. 4: Contractor format is acceptable.

Blk. 9: See Distribution Statement Addendum

Blks 10-12: The Certificates of Compliance for each Elastomer Strip-Guard part number manufactured shall be delivered to NUWCDIVNPT at time of shipment of the Elastomer Strip-Guards..

15. TOTAL ---------------

G. PREPARED BY

Robert M. Waleyko

H. DATE

5/16/2017

I. APPROVED BY

J. DATE

DD Form 1423-2, AUG 96 (EG) Previous Edition May be Used Page ___1_of 1_Page

PR # 1300645680

DD FORM 1423

CONTRACT DATA REQUIREMENTS LIST

BLOCK 16 ADDENDUM

BLOCK 9: The following information is specifically included in amplification of the Block 9 Distribution Statement selected:

Distribution Statement paragraphs are in addition to CLASSIFICATION markings of the data.

Distribution Statement D. Applies to CDRL Item No. A001 and A002. Distribution authorized to the DoD and DoD contractors only; Critical Technology. Dated when data generated. Other requests for this document shall be referred to Naval Undersea Warfare Center Division, Newport, RI, Code 4013.

The following “EXPORT CONTROL WARNING NOTICE” must be used in conjunction with DISTRIBUTION STATEMENTS identified in the above CDRL item:

WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U. S. C. Sec. 2751 et seq.)

or the Export Administration Act of 1979, as amended, Title 50, U. S. C., App 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.