Attachment__2_Government_Min_Specs_N66604-17-Q-2141.docx
DOCX document 22 KB Posted
- Solicitation number
- N66604-17-Q-2141
About this file
Attachment #2, Government Minimum Specifications
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment__1_HF_Radios_CLIN_structure_2017-06-08.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment #2, N66604-17-Q-2141 Government Minimum Specifications
TRANSCEIVER SYSTEM
General Specifications Frequency Range: TX: 1.5 to 30 MHz (1 Hz steps) RX: 100 kHz to 30 MHz Programmable Channels: Equal or greater than 128 Simplex or half-duplex Frequency Stability: ±0.5 x 10-6 (optional ±1 x 10-8) external clock input available
| Modes of Operation: | 2x ISB, USB, LSB, AM, CW, and DATA |
| Modulation: | Analog and Digital |
| Memory Retention: | Non-volatile |
Scan: Manual or Automatic (2 or 5 channels/sec w/ALE) Local Control: Front Panel Keypad for frequency, modes, AGC, frequency parameters:
AGC, frequency response, et al Front Panel Keypad for frequency, Modes of Operation, AGC, and frequency response minimum AGC, frequency response,
| Data Modem | Integrated MIL-STD-188-110B, which includes forward error correction (FEC) | ||
| MIL-STD-188-203-1A (Link 11/22 compatibility) | |||
| ALE Modem: | Integrated MIL-STD-188-141B |
RF Input/Output Impedance: 50-Ohm nominal, unbalanced.
Antenna Input Protection: To +43 dBm and lightning protection via an external RF Surge Suppressor Overheating Protection: Transmitter shall reduce power or shutdown in the event of overheating BITE: Fault isolated to module level (LRU), descriptive readout on front panel and individual module indication.
MTBF: > 5000 Hours, per MIL-HDBK-217F Input Power: DC: 19.2-32 Vdc
AC: 115/230 VAC 10%,
Mechanical Format: 19” rack mountable with a maximum depth of 22” Construction: Modular plug-in assemblies.
Environmental
| Temperature: | -30°C to +60°C (-40°C to +70°C storage) | ||
| Humidity: | 95% at +50°C | ||
| Environmental Testing: | MIL-STD-810F, methods 501.4, 502.4, 507.4, | ||
| Vibration: | MIL-STD-810F, method 514.5 | ||
| EMI: | MIL-STD-461E, CS101, CE102, RE102 and RS103 |
Receiver
| Selectivity – SSB: | 300 Hz to 3050 Hz, per MIL-STD 141B paragraph 5.2.7.1 | ||
| Selectivity – AM: | ±3000 Hz | ||
| Adjacent Channel Rejection: | Greater than 50 dB | ||
| Sensitivity: | SSB/ISB: -113 dBm for 10 dB SINAD (2-30 MHz); AM: -97.5 dBm for 10 dB SINAD (2-30 MHz); CW: -116 dBm for 10 dB SINAD (2-30 MHz) | ||
| Audio Output: | 5 watts into internal speaker @ <10% distortion; line audio up to 15 |
mW into 600-Ohm; handset: low impedance.
Image & IF Rejection: 80 dB minimum Automatic Gain Control: Compatible with selected mode of operation
Transmitter
| Output Power: | SSB, 2-ISB: 125W PEP Total; AM: 40W typical | |||
| Harmonic Suppression: | Greater than 50 dB | |||
| Carrier Suppression: | Greater than 50 dB | |||
| Undesired Sideband: | Greater than 50 dB | |||
| VSWR: | Operates at VSWR 2:1 (Automatic power reduction above 2:1) | |||
| Audio Input: | Microphone and 600-Ohm lines |
The Transceiver System shall include:
Transceiver 19” Rack-mount Kit Voice Communications Handset Transceiver Power Supply (if the transceiver power supply is external) Transceiver Power Supply 19” Rack-mount Kit with 6ft Power Supply Cable (if the transceiver power supply is external) Control cable (design dependent)
Options for 8ft, 30ft, or 50ft Transceiver to Power Amplifier Control Cable Options for 8ft, 30ft, or 50ft Transceiver to Power amplifier 50-Ohm RF cable
POWER AMPLIFIER SYSTEM
General
| RF Power Output: | 1000W, Power Envelop Power (PEP) or Average | |||
| Frequency Range: | 1.6 to 30 MHz | |||
| Harmonics: | -50 dBc (2 to 30 MHz) | |||
| Non-Harmonic Products: | -70 dBc (2 to 30 MHz) | |||
| Intermodulation Distortion: | -30 dB | |||
| Duty Cycle: | Continuous service | |||
| RF Drive Level: | 30-50W, nominal | |||
| Input/Output Impedance: | 50 Ohms | |||
| VSWR: | ≤ 2:1 with power rollback and bypass protection | |||
| Power Requirements: | 220Vac, 20A, maximum |
Mechanical
| Size: | 19” rack mountable with a maximum depth of 22” | |
| Cooling: | Forced air |
Environmental
| Temperature: | -20°C to +50°C operational, -40°C to +70°C storage |
| Humidity: | 95% @ +50°C |
Control and Indicators
| Control: | Amplifier ON/OFF | |
| Metering: | Forward RF power, Reflected RF power | |
| Connectors: | RF input, RF output, Control, Fault, Tuner | |
| Indicator’s (LED’S): | AC present, DC present, PTT, high VSWR, high DC current, high |
temperature, fault (bypass mode)
The Power Amplifier System shall include:
Power Amplifier Power Supply (if the amplifier power supply is external) Power Amplifier 19” Rack-mount Kit Power Supply 19” Rack-mount Kit with 6ft Power Supply Cable (if the transceiver power supply is external) Lightning Protector
Options for 50ft, 100ft, 150ft, 200ft, or 250ft Power Amplifier to Antenna Coupler/Tuner Control cable Options for 50ft, 100ft, 150ft, 200ft, or 250ft 50-Ohm, N connector to N connector 50-Ohm RF cable
ANTENNA COUPLER/TUNER
General RF Power Input: 1000W, PEP or Average Frequency Range 2 to 30 MHz Tune Time: 3 - 5s, first tune (typical) < 20 ms, memory tune Input/Output Impedance: 50 Ohms
Tuning Accuracy: 1.5:1 VSWR, typical Memory Channels: 50 minimum
Environmental
| Temperature (Operating): | -30C to +55 degrees C. (ambient inside the unit) |
| Shock, Vibration | MIL-STD-810 (with shock mount) |
Immersion: Waterproof; immersion to 3 feet Humidity, Fungus: MIL-STD-810 Sand & DUST, SALT, FOG
The Antenna Coupler shall include:
Shock Mount Assembly
Options for 50ft, 100ft, 150ft, 200ft, or 250ft Power Amplifier to Antenna Coupler/Tuner Control cable Options for 50ft, 100ft, 150ft, 200ft, or 250ft 50-Ohm, N connector to N connector 50-Ohm RF cable
Overall System Warranty information: See combined synopsis/solicitation and Attachment #1, CLIN Structure, with regards to warranties
File details come from the government source that posted it. Updated .