1300393188_SOW_MK39_EMATT_Mod_2_TER.pdf

PR# 1300393188 N66604-XX-XXXXX

02 October 2014

Statement of Work

1.0 BACKGROUND

The Undersea Weapons Program Office (PMS404) has tasked the Naval Undersea

Warfare Center Division Newport (NUWCDIVNPT), Code 85, to procure MK 39 Mod 2

Expendable Mobile Antisubmarine Warfare (ASW) Training Target (EMATT) with True

Echo Repeat (TER) configuration. The MK 39 Mod 2-TER EMATT is the next evolution of the expendable ASW training target that will provide the fleet with an improved, realistic, ASW target for open ocean and range use. The MK 39 Mod 2-TER EMATT will integrate the improved capabilities of MK 39 Mod 2 with a towed array.

The MK 39 Mod 2-TER EMATT is the US Navy’s open ocean ASW Training Target.

MK 39 Mod 2-TER EMATTs simulate the acoustic and dynamic characteristics of a submarine threat. This allows all the Navy ASW, surface, air and subsurface communities to practice their detection, tracking and weapon employment skills against a threat representative target. MK 39 Mod 2-TER EMATT are launched from surface ships, range support craft, and from ASW aircraft via sonobuoy tubes. Target run profiles will be programmable externally through a portable programmer to produce customized runs for specific training needs. The MK 39 Mod 2-TER EMATT will be capable of generating discrete tonals and tonal families, broadband noise, and transient signals.

The Portable Target Programmer (PTP) allows Fleet users to reprogram EMATTs in the field to meet real time specific training needs. The PTP has the capability to perform

Built-In-Test of the EMATT, and can be used to download new operating system software to upgrade the EMATT.

Foreign Military Sales variants of the MK 39 EMATT configuration is country specific;

the specific feature configuration of each FMS target will be provided at the time the

FMS CLIN option is awarded.

2.0 SCOPE

This Statement of Work (SOW) sets forth the work efforts required by the contractor to perform Engineering Services in support of the MK 39 Mod 2-TER EMATT program to include inspection, test, repair, operational and testing support, and software development.

3.0 APPLICABLE DOCUMENTS

To the extent referenced herein, the following documents form a part of this SOW and are hereby incorporated by reference. If no revision is indicated, the revision in effect on the date of contract award applies. In the event of a conflict between the documents referenced herein and the contents of this SOW, the contents of this SOW shall take precedence.

Applicable

Document # Document # Document Title Date or Revision

3.1 7490774 Prime Item Product Performance Specification for the MK 39 Mod 2-TER EMATT

Rev 3

4.0 REQUIREMENTS

The following tasks shall be performed in accordance with Applicable Documents listed in section 3.0 and GFI listed in section 6.0. Technical Instructions provided under each task order will specify the list of applicable documents and GFI for the specific task in the Task Order.

4.1 Task 1: Engineering Services

In accordance with Applicable Document 3.1 and utilizing GFI, the contractor shall provide the following engineering services:

The contractor shall inspect, test, repair and refurbish MK 39 Mod 2-TER EMATTs and

Portable Target Programmers to be meet the requirements of Applicable Document 3.1.

The contractor shall modify MK 39 Mod 2-TER EMATTs, Portable Target

Programmers, or subsystems to meet specific testing or operational requirements.

The contractor shall submit Engineering Change Proposals to the Government for review and approval for changes to the MK 39 Mod 2-TER EMATT baseline.

The contractor shall provide software development support for windows and security updates, troubleshooting errors in software operation, and to be in compliance with up to date patches and IAVAS for the MK 39 Mod 2-TER EMATTs, Portable Target

Programmers, and Run Geometry Application software.

The contractor shall provide operational support to MK 39 Mod 2-TER EMATT field testing.

The contractor shall provide test engineering training to Military and Civilian personnel.

All engineering services will be performed on an as needed basis as specified by the

Government in a Technical Instruction (TI). The engineering services shall be performed in the contractor’s plant or at other locations specified by the Government in a Technical

Instruction (TI).

5.0 PROGRESS REPORTS

The contractor shall deliver monthly cost and performance reports in accordance with the basic contract clause C16 – COST AND PERFORMANCE REPORTING.

6.0 GFI

6.1 Operational Instructional Sheet

7.0 QUALITY SURVEILLANCE AND PERFORMANCE STANDARDS

The Government will conduct quality surveillance via various methods including formal and informal meetings, review of technical reports, review of monthly progress reports, and review of deliverables. Contractor performance will be evaluated in the areas of technical quality, responsiveness, timeliness and cost. Technical quality will be evaluated against the performance standards defined in the documents identified in task paragraphs. Responsiveness will be evaluated based upon the government’s experience interacting with the contractor during performance. Timeliness will be evaluated based on the contractor’s ability to meet CDRL schedules with minimal variance. Cost will be evaluated based upon the contactor’s ability to manage to the negotiated costs.