N6660414R0044.pdf

CODE

(Hour)

PAGE(S)

until 03:00 PM local time 16 May 2014

X

A

X B

X C X D

EX

X

G

F 31 - 37

38 - 50

X H

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

1 50

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N66604 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

SEE BLOCK 7

conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 4

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

5 - 9

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 13 - 17 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 18 M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

19 - 29

PART II - CO NTRACT CLAUSES

NAVAL UNDERSEA WARFARE CTR. DIV., NPT.

NEIL C. SANTOS, CODE 5912

COMMERCIAL ACQUISITION

1176 HOWELL STREET, BLDG. 1258

NEWPORT RI 02841

401-832-4827

401-832-4820FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

15 Apr 2014

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N66604-14-R-0044

Section B - Supplies or Services and Prices

CLAUSES INCORPORATED BY FULL TEXT

B18 SUPPLIES/SERVICES AND PRICES - IDIQ (SEP 2001)

This is an indefinite delivery - indefinite quantity contract with Firm Fixed Price provisions. The Contractor shall, in accordance with orders issued by the ordering officer, perform work assignments within the parameters of the

Statement of Work.

ITEM DESCRIPTION QTY. UNIT UNIT

PRICE

AMOUNT

0001 Test, Inspect and Evaluate (TI&E) returned Q Band

TWT Amplifier Modules To Be Determined; See Tables Below

0002 Q Band TWT Amplifier Module Fabrication To Be Determined; See Tables Below

0003 DATA Not Separately Priced

TABLES

Offerors shall fill in the tables by stating the per unit price for (CLIN0001) Testing, Inspection and Evaluation

(TI&E) of each returned Q Band TWT Amplifier Modules and the per unit price for (CLIN0002) Q Band TWT

Amplifier Module Fabrication, for each Quantity and Ordering Period. The Government will determine each quantity to be purchased. Multiple Delivery Orders may be placed in a given Ordering Period. (Not to Exceed a

Max. Total of 15 Q Band TWT Amplifier Modules in a given Ordering Period)

Ordering Period 1: Contract Award (Aug. 1 2014 *planning purposes only*– 31 December 2014

Item Description Qty. 1

0001 Test, Inspect and Evaluate (TI&E) returned Q Band TWT

Amplifier Modules

Item Description Part

Number

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

Fabrication

8905HP-I

Ordering Period 2: 1 January 2015 – 31 December 2015

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

Ordering Period 3: 1 January 2016 – 31 December 2016

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

Ordering Period 4: 1 January 2017 – 31 December 2017

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

Ordering Period 5: 1 January 2018 – 31 December 2018

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

Ordering Period 6: 1 January 2019 – 31 July 2019 *(planning purposes only based on Aug.1 2014 award)

Qty. 1-5 Qty. 6-10 Qty. 11-15

0002 Q Band TWT Amplifier Module

For Planning Purposes 1 AUG. 2014 is used for the start date of Ordering Period 1 and 31 July 2019 is used for the end date of Ordering Period 6. The official start date will be based on the actual date of award and will conclude 5 years thereafter.

HQ B-2-0022 CONTRACT SUMMARY FOR PAYMENT OFFICE (FIXED

PRICE) (FEB 1997)

This entire contract is fixed price.

Section C - Descriptions and Specifications

C11 STATEMENT OF WORK (JAN 2012)

Services are to be performed in accordance with the Statement of Work below:

1 INTRODUCTION

1.1 Background

Code 34 of the Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is designated by PEO C4I

PMW 770 as the Technical Direction Agent (TDA) for the SubHDR System. Additionally, Commander Submarine

Force (COMSUBFOR) has a Memorandum of Agreement (MOA) which designates NUWCDIVNPT as the

Submarine High Data Rate (HDR) National Maintenance Center (NMC). The MOA requires NUWCDIVNPT to conduct maintenance and repair of Submarine HDR Systems, as well as establishing and maintaining a rotatable pool of Submarine HDR assets. The Submarine HDR NMC is responsible for recommending and implementing engineering changes into Submarine HDR Systems to enhance the life of the system in the fleet. It is anticipated that the Submarine HDR NMC will process between 30-40 systems per year for either repair or upgrade. The Submarine

HDR System is an acquisition category III program that was acquired by the SPAWAR PMW 770 Submarine

Communications Program office, and the system has a Force Activity Designation of I which authorizes the use of a

DX Industrial Priority rating.

1.2 Scope

This Statement of Work (SOW) sets forth the contractor responsibilities for fabrication, test and delivery of L3 Q

Band TWT Amplifier Module part number 8905HP-I, in support of the OE-562A/USC-38(V) Submarine High Data

Rate (SubHDR) Antenna System Mast Group as specified in section B per Government Furnished Information

(GFI), performance specifications, contractor’s drawings, internal contractor’s specifications, procedures and processes. The contractor shall also support Test Inspect and Evaluations (TI&E) of failed Q Band TWT Amplifier

Modules part number 8905HP-I that are removed from existing systems. This SOW supports the efforts for the basic contract.

1.3 Definitions

(a) OE-562A SubHDR Antenna System

The Submarine HDR Antenna System consists of the Mast Electronics Group and the Antenna Pedestal

Group. This system is unsheltered environment equipment and interfaces with below deck equipment to support RF Transmission and Reception.

(b) Mast Electronics Group

Provides the RF Amplification functionality of the SubHDR Antenna and is contained in a titanium tube, which can be separated from the Antenna Pedestal Group.

(c) Antenna Pedestal Group

Contains a 3-axis pedestal with a 16.25 inch dish antenna, motors, resolvers, rotary joints and a mast motion sensor to provide local changes in the mast position and is mounted to the top of the Mast Electronics

Group.

(d) Q Band TWT Amplifier Module

A high power Amplifier utilized to provide the specified power output required by the SubHDR Mast

Electronics Group.

2 APPLICABLE DOCUMENTS/DRAWINGS

PRF 06792091 SubHDR TWT Performance Specification PRF 06792091 - 11 February 2013

SPAWAR-S-868C Performance Specification for the Submarine High Data Rate

(HDR) Satellite Communications System

G761794/K Amplifier Radio Frequency TWT Q-Band

G608308/E TWT Outline Drawing

2.1 Issue of Documents

Unless otherwise specified herein, the SOW documents listed in the Department of Defense Index of Specifications and Standards (DODISS), in effect on the date of the request for proposal (RFP), form a part of this SOW to the extent specified herein.

2.2 Specifications

SubHDR Q Band TWT Amplifier Modules Part #8905HP-I (CLIN 0002) are to be designed and produced in accordance with performance specification # 06792091, while maintaining the same form, fit and function as set forth in outline drawing # 06792090.

2.3 Standards

SubHDR Q Band TWT Amplifier Modules Part #8905HP-I (CLIN 0002) are to be produced in accordance with the

Q Band Traveling Wave Tube Amplifier Module Performance Specification # 06792091.

3 REQUIREMENTS

3.1 Test Inspect and Evaluations (TI&E) of returned Q Band TWT Amplifier Modules

(CLIN-0001)

The contractor shall conduct a Test, Inspect, and Evaluation (TI&E) on all returned Q Band TWT Amplifier

Modules that shall include:

TWT Evaluation per internal contractor’s specifications, procedures and processes

TWT Performance per performance specification 06792091

Failure analysis

Q Band TWT Amplifier Modules serial numbers will be provided by the COR on all units returned for evaluations per individual task order. The contractor shall provide Firm Fixed priced Test, Inspect and evaluations of returned Q

Band TWT Amplifier Modules removed from existing systems to determine the root cause of failure.

CDRL Deliverable(s):

A001: Technical Report (DI-M ISC-80508B)

3.2 Task 2 Q Band TWT Amplifier Module Fabrication (CLIN-0002)

The contractor shall fabricate test and deliver new Q Band TWT Amplifier Module (L-3 Part # 8905HP-I), according to Government Furnished Information (GFI) performance specification #06792091, Outline drawing

#06792090, Acceptance test data Sheets, internal contractor’s specifications, procedures and processes.

CDRL Deliverable(s):

A002: Test and inspection Report (DI-NDTI-80809B)

4 PERFORMANCE

The work specified herein shall be performed at the contractor's facility.

5 SECURITY REQUIREMENTS

All tasks under this Statement of Work are Distribution D, FOUO Sensitive, UNCLASSIFIED.

C26 INFORMATION ASSURANCE – UNCLASSIFIED DOD INFORMATION ON NON-DOD

INFORMATION SYSTEMS (JUL 2010)

(a) The Contractor shall ensure that unclassified DoD information it receives or produces in support of DoD activities is protected according to the information safeguards described in Attachment 2 to Directive-Type

Memorandum (DTM) 08.027 – Security of Unclassified DoD Information on Non-DoD Information Systems, which is available at the following web address: http://www.dtic.mil/whs/directives/corres/pdf/DTM-08-027.pdf

(b) Upon request by the Government, the Contractor shall provide documentation demonstrating the safeguards the contractor has implemented to ensure the security of unclassified DoD Information.

(c) Contractor personnel that have not been briefed on Attachment 2 to Directive-Type memorandum (DTM) 08-027

– Security of Unclassified DoD Information on Non-DoD Information Systems shall be denied access to contractor systems that contain unclassified DoD information.

(d) Subcontracts. If the Contractor issues any subcontracts in which the subcontractor will have access to unclassified DoD information, the Contractor shall include this clause.

http://www.dtic.mil/whs/directives/corres/pdf/DTM-08-027.pdf

HQ C-1-0001 ITEM(S) - DATA REQUIREMENTS (NAVSEA) (SEP 1992)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data

Requirements List, DD Form 1423, Exhibit(s) A , attached hereto.

HQ C-2-0014 CONTRACTOR'S PROPOSAL (NAVSEA) (MAR 2001)

(a) Performance of this contract by the Contractor shall be conducted and performed in accordance with detailed obligations to which the Contractor committed itself in

Proposal dated in response to NUWC-Newport

Solicitation No. .

(b) The technical volume(s) of the Contractor's proposal is incorporated by reference and hereby made subject to the provisions of the "ORDER OF PRECEDENCE" (FAR 52.215-

8) clause of this contract. Under the "ORDER OF PRECEDENCE" clause, the technical volume of the Contractor's proposal referenced herein is hereby designated as item (f) of the clause, following "the specification" in the order of precedence.

HQ C-2-0051 SPECIFICATIONS AND STANDARDS (NAVSEA) (AUG 1994)

(a) Definitions.

(i) A "zero-tier reference" is a specification, standard, or drawing that is cited in the contract (including its attachments).

(ii) A "first-tier reference" is either: (1) a specification, standard, or drawing cited in a zero-tier reference, or (2) a specification cited in a first-tier drawing.

(b) Requirements.

All zero-tier and first-tier references, as defined above, are mandatory for use. All lower tier references shall be used for guidance only.

HQ C-2-0059 UPDATING SPECIFICATIONS AND STANDARDS (NAVSEA)

(AUG 1994)

If, during the performance of this or any other contract, the contractor believes that any contract contains outdated or different versions of any specifications or standards, the contractor may request that all of its contracts be updated to include the current version of the applicable specification or standard. Updating shall not affect the form, fit or function of any deliverable item or increase the cost/price of the item to the Government. The contractor should submit update requests to the Procuring Contracting Officer with copies to the Administrative Contracting Officer and cognizant program office representative for approval. The contractor shall perform the contract in accordance with the existing specifications and standards until notified of approval/disapproval by the Procuring

Contracting Officer. Any approved alternate specifications or standards will be incorporated into the contract.

Section D - Packaging and Marking

D3 DELIVER TO ADDRESS (AUG 2006)

All deliveries will be made to the following address and annotated with the “Mark For” information:

Receiving Officer, Naval Station Newport

47 Chandler Street

Newport, RI 02841-1716

Mark For: NUWC Division, Newport –

N66604- TBD

HQ D-1-0001 DATA PACKAGING LANGUAGE

Data to be delivered by Integrated Digital Environment (IDE) or other electronic media shall be as specified in the contract.

All unclassified data to be shipped shall be prepared for shipment in accordance with best commercial practice.

Classified reports, data, and documentation shall be prepared for shipment in accordance with National Industrial Security Program Operating Manual (NISPOM), DOD 5220.22-M dated 28 February 2006.

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-4 Inspection Of Services--Fixed Price AUG 1996

52.246-16 Responsibility For Supplies APR 1984

252.246-7000 Material Inspection And Receiving Report MAR 2008

HQ E-1-0001 INSPECTION AND ACCEPTANCE LANGUAGE FOR DATA

Inspection and acceptance of all data shall be as specified on the attached Contract Data

Requirements List(s), DD Form 1423.

HQ E-1-0003 INSPECTION AND ACCEPTANCE LANGUAGE FOR F.O.B.

DESTINATION DELIVERIES

Item(s) All - Inspection and acceptance shall be made at destination by a representative of the Government.

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

52.242-15 Stop-Work Order AUG 1989

52.242-15 Stop-Work Order AUG 1989

52.242-17 Government Delay Of Work APR 1984

52.247-34 F.O.B. Destination NOV 1991

52.247-55 F.O.B. Point For Delivery Of Government-Furnished Property JUN 2003

F20 PERFORMANCE PERIOD (SEP 2001)

(a) For planning and proposal purposes this contract will become effective on Aug 1 2014. The actual effective date shall be established at contract award and will be set forth on the face page of the contract. The ordering period is defined in the clause entitled, Ordering (DFARS 252.215-7006).

(b) The performance period shall continue until the date specified in the clause entitled, Requirements (FAR

52.216-21), or Indefinite Quantity (FAR 52.216-22), whichever is applicable.

(c) Individual orders will specify a beginning date and an ending date. Costs incurred prior to the beginning date or after the ending date shall not be directly allowable without the written consent of the Contracting Officer

(modification).

F30 PLACE OF PERFORMANCE (SEP 2001)

(a) Work will be performed at the Contractor's facility.

Section G - Contract Administration Data

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

When submitting a request for payment, the Contractor shall--

(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and

(b) Separately identify a payment amount for each contract line item included in the payment request.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training

Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data

Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

INVOICE AND RECEIVING REPORT (COMBO)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in

WAWF, as specified by the contracting officer.

DESTINATION/DESTINATION

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC ____

Admin DoDAAC ____

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional

Email Notifications” field of WAWF once a document is submitted in the system.

TBD

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

G10 CONTRACTUAL AUTHORITY AND COMMUNICATIONS (JUN 2012)

(a) Functions: The Procuring Contracting Officer (PCO) for this contract is identified on the basic contract. Only the

PCO can change the basic contract, and the PCO maintains primacy over the contract and all its task orders. The

Contracting Officer of this Task Order is a warranted Ordering Officer of the Naval Undersea Warfare Center

Division Newport. The Government reserves the right to administratively transfer authority over this task order from the individual named below to another Contracting Officer at any time.

(b) Authority: The Contracting Officer is the only person authorized to approve changes in any of the requirements of this task order and, notwithstanding provisions contained elsewhere in this task order, the said authority remains solely the Contracting Officer's. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer. No order, statement, or conduct of any Government personnel who visit the Contractor's facilities or in any other manner communicates with Contractor personnel during the performance of this task order shall constitute a change under the Changes clause of this task order and no adjustment will be made in the task order price to cover any increase in charges incurred as a result thereof. Therefore, in no event will any understanding, agreement, modification, change order, or other matter deviating from the terms of the basic contract or this task order between the contractor and any other person be effective or binding on the Government. If, in the opinion of the contractor, an effort outside the existing scope of this task order is requested, the contractor shall promptly notify the Contracting Officer in writing.

No action shall be taken by the contractor unless the Contracting Officer or basic contract PCO has issued a formal modification.

(c) The Contracting Officer is:

Name: TBD

Telephone: Commercial 401-832 ; DSN 432-

Fax Commercial: 401-832-4820; DSN: 432-4820

Email: @navy.mil

(d) The Negotiator is:

Name: Neil C Santos

Telephone: Commercial 401-832-4827

Fax Commercial: 401-832-4820

Email: neil.santos@navy.mil

(e) The Contracting Officer’s Representative (COR) for this contract is:

Name: TBD

Code:

Mailing Address: Naval Undersea Warfare Center Division, Newport, 1176 Howell Street, Building: Room: , Newport, RI 02841

Telephone: Commercial 401-832 ; DSN 432-

Fax Commercial: 401-832-4820; DSN: 432-4820

Email: @navy.mil

The COR is responsible for those specific functions assigned in the COR Appointment Letter.

(f) Contractor’s Representative is: (CONTRACTOR FILL-IN)

Name:

Title:

Mailing Address:

E-Mail Address:

Telephone:

Fax:

G11 CONTRACT ADMINISTRATION FUNCTIONS (SERVICES) (JAN 2012)

(a) The cognizant Administrative Contracting Office for this contract is identified in Block 12 on page one of this contract.

(b) PCO RETAINED FUNCTIONS. The Procuring Contracting Officer (PCO) retains the administrative functions described in FAR 42.302(a) and listed below. These functions will be accomplished as set forth in the

Contract Administration Plan or Contract Administration Master Plan, as applicable, Attachment #4.

(3) Conduct post-award orientation conferences.

(40) Perform engineering surveillance to assess compliance with contractual terms for schedule, cost, and technical performance in the areas of design, development, and production.

(44) Perform engineering analyses of contractor cost proposals.

(45) Review and analyze contractor-proposed engineering and design studies and submit comments and recommendations to the contracting office, as required.

(46) Review engineering change proposals for proper classification, and when required, for need, technical adequacy of design, producibility, and impact on quality, reliability, schedule, and cost; submit comments to the contracting office.

(47) Assist in evaluating and make recommendations for acceptance or rejection of waivers and deviations.

(c) ACO DELEGATED FUNCTIONS. The Administrative Contracting Officer (ACO) is delegated the following functions:

(1) All other functions of FAR 42.302(a) except (3), (40), (44), (45), (46), and (47).

(2) The function of FAR 42.302(b)(4); negotiating and executing supplemental agreements providing for the deobligation of unexpended dollar balances considered excess to known contract requirements, and for the crediting of any overpayments made to the contractor. Attach a copy of the modification to the DD 1594 and forward to the PCO address (Attn: Code 5912 -- CLOSEOUT)

(3) The function of FAR 42.302(b)(6).

(d) If the ACO identifies a contract administration problem, the remedy for which is not covered by the above, the

ACO shall request the PCO to delegate additional functions as necessary. The PCO may delegate authority by letter.

G14 CONTRACTOR'S SENIOR TECHNICAL REPRESENTATIVE (AUG 2005)

The contractor's senior technical representative, point of contact for performance under this contract is:

(Fill-in the information required below)

Name:

Title:

Mailing Address:

E-mail Address:

Telephone:

Fax:

SUPPLEMENTAL INSTRUCTIONS REGARDING ELECTRONIC INVOICING (NAVSEA) (SEP 2012)

(a) The Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the technical instruction (TI), sub line item number (SLIN), or contract line item number (CLIN) level, rather than on a total contract/TO basis, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs

(ODCs), materials, and travel, by TI, SLIN, or CLIN level. For other than firm fixed price subcontractors, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer (CO) and Contracting Officer Representative (COR).

Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the CO and COR; or other method as agreed to by the CO.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data

Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and CO on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and CO email notification as required herein.

Section H - Special Contract Requirements

H24 PROHIBITION ON TELECOMMUNICATIONS (OCT 2006)

The contractor is expressly prohibited from purchasing any telecommunication devices (i.e. satellite telephones, cell phones, pagers, blackberry, two way radios, walkie-talkies, etc. or any associated accessories) without the written approval of the contracting officer on an item by item basis.

Section I - Contract Clauses

52.202-1 Definitions NOV 2013

52.203-3 Gratuities APR 1984

52.203-5 Covenant Against Contingent Fees APR 1984

52.203-6 Restrictions On Subcontractor Sales To The Government SEP 2006

52.203-7 Anti-Kickback Procedures OCT 2010

52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or

Improper Activity

JAN 1997

52.203-10 Price Or Fee Adjustment For Illegal Or Improper Activity JAN 1997

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-13 Contractor Code of Business Ethics and Conduct APR 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

SEP 2013

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-7 System for Award Management JUL 2013

52.204-10 Reporting Executive Compensation and First-Tier Subcontract

Awards

JUL 2013

52.204-12 Data Universal Numbering System Number Maintenance DEC 2012

52.204-13 System for Award Management Maintenance JUL 2013

52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for

Debarment

AUG 2013

52.209-9 Updates of Publicly Available Information Regarding

Responsibility Matters

JUL 2013

52.215-2 Audit and Records--Negotiation OCT 2010

52.215-8 Order of Precedence--Uniform Contract Format OCT 1997

52.215-11 Price Reduction for Defective Certified Cost or Pricing Data--

Modifications

AUG 2011

52.215-13 Subcontractor Certified Cost or Pricing Data--Modifications OCT 2010

52.215-14 Integrity of Unit Prices OCT 2010

52.215-14 Alt I Integrity of Unit Prices (Oct 2010) - Alternate I OCT 1997

52.215-18 Reversion or Adjustment of Plans for Postretirement Benefits

(PRB) Other than Pensions

JUL 2005

52.215-21 Requirements for Certified Cost or Pricing Data or

Information Other Than Certified Cost or Pricing Data--

Modifications

OCT 2010

52.219-8 Utilization of Small Business Concerns JUL 2013

52.219-14 Limitations On Subcontracting NOV 2011

52.219-16 Liquidated Damages-Subcontracting Plan JAN 1999

52.222-3 Convict Labor JUN 2003

52.222-21 Prohibition Of Segregated Facilities FEB 1999

52.222-26 Equal Opportunity MAR 2007

52.222-35 Equal Opportunity for Veterans SEP 2010

52.222-36 Affirmative Action For Workers With Disabilities OCT 2010

52.222-37 Employment Reports on Veterans SEP 2010

52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-50 Combating Trafficking in Persons FEB 2009

52.223-6 Drug-Free Workplace MAY 2001

52.223-16 Alt I IEEE 1680 Standard for the Environmental Assessment of

Personal Computer Products (Dec 2007) Alternate I

DEC 2007

52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

DEC 2012

52.227-1 Authorization and Consent DEC 2007

52.227-2 Notice And Assistance Regarding Patent And Copyright

Infringement

DEC 2007

52.228-7 Insurance--Liability To Third Persons MAR 1996

52.229-3 Federal, State And Local Taxes FEB 2013

52.230-3 Disclosure And Consistency Of Cost Accounting Practices MAY 2012

52.232-1 Payments APR 1984

52.232-8 Discounts For Prompt Payment FEB 2002

52.232-9 Limitation On Withholding Of Payments APR 1984

52.232-11 Extras APR 1984

52.232-17 Interest OCT 2010

52.232-23 Alt I Assignment of Claims (Jan 1986) - Alternate I APR 1984

52.232-25 Prompt Payment JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes JUL 2002

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.242-13 Bankruptcy JUL 1995

52.243-1 Changes--Fixed Price AUG 1987

52.244-5 Competition In Subcontracting DEC 1996

52.244-6 Subcontracts for Commercial Items DEC 2013

52.245-1 Government Property APR 2012

52.245-9 Use And Charges APR 2012

52.246-25 Limitation Of Liability--Services FEB 1997

52.249-2 Termination For Convenience Of The Government (Fixed-

Price)

APR 2012

52.249-8 Default (Fixed-Price Supply & Service) APR 1984

52.252-3 Alterations in Solicitation APR 1984

52.252-5 Authorized Deviations In Provisions APR 1984

52.252-6 Authorized Deviations In Clauses APR 1984

52.253-1 Computer Generated Forms JAN 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7001 Prohibition On Persons Convicted of Fraud or Other Defense-

Contract-Related Felonies

DEC 2008

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.205-7000 Provision Of Information To Cooperative Agreement Holders DEC 1991

252.215-7000 Pricing Adjustments DEC 2012

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012

252.225-7006 Quarterly Reporting of Actual Contract Performance Outside the United States

OCT 2010

252.225-7012 Preference For Certain Domestic Commodities FEB 2013

252.226-7001 Utilization of Indian Organizations and Indian-Owned

Economic Enterprises, and Native Hawaiian Small Business

Concerns

SEP 2004

252.227-7013 Rights in Technical Data--Noncommercial Items JUN 2013

252.227-7015 Technical Data--Commercial Items JUN 2013

252.227-7016 Rights in Bid or Proposal Information JAN 2011

252.227-7017 Identification and Assertion of Use, Release, or Disclosure

Restrictions

JAN 2011

252.227-7030 Technical Data--Withholding Of Payment MAR 2000

252.227-7037 Validation of Restrictive Markings on Technical Data JUN 2013

252.232-7010 Levies on Contract Payments DEC 2006

252.233-7001 Choice of Law (Overseas) JUN 1997

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.245-7001 Tagging, Labeling, and Marking of Government-Furnished

Property

APR 2012

252.245-7002 Reporting Loss of Government Property APR 2012

252.245-7003 Contractor Property Management System Administration APR 2012

252.245-7004 Reporting, Reutilization, and Disposal MAY 2013

252.247-7023 Transportation of Supplies by Sea JUN 2013

52.216-19 ORDER LIMITATIONS. (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than QTY. 1 - Q Band TWT Amplifier Module (CLIN 0002), the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor:

(1) Any order for a single item in excess of 15 EACH;

(2) Any order for a combination of items in excess of 15 EACH; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal

Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the

Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above.

(d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 3 Business days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY. (OCT 1995)

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum". The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum".

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and

Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after TBD.

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The

Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the

Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in

SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code 334419- assigned to contract number .

(Contractor to sign and date and insert authorized signer's name and title).

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (AUG 2013)

(a) Definitions. As used in this clause--Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply that is--

(i) A commercial item (as defined in paragraph (1) of the definition at 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Per 46 CFR 525.1(c)(2), ``bulk cargo'' means cargo that is loaded and carried in bulk onboard ship without mark or count, in a loose unpackaged form, having homogenous characteristics. Bulk cargo loaded into intermodal equipment, except LASH or Seabee barges, is subject to mark and count and, therefore, ceases to be bulk cargo.

Employee assigned to the contract means an employee who was hired after November 6, 1986 (after November 27, 2009, in the Commonwealth of the Northern Mariana Islands), who is directly performing work, in the United States, under a contract that is required to include the clause prescribed at 22.1803. An employee is not considered to be directly performing work under a contract if the employee--

(1) Normally performs support work, such as indirect or overhead functions; and

(2) Does not perform any substantial duties applicable to the contract.

Subcontract means any contract, as defined in 2.101, entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract. It includes but is not limited to purchase orders, and changes and modifications to purchase orders.

Subcontractor means any supplier, distributor, vendor, or firm that furnishes supplies or services to or for a prime

Contractor or another subcontractor.

United States, as defined in 8 U.S.C. 1101(a)(38), means the 50 States, the District of Columbia, Puerto Rico, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands.

(b) Enrollment and verification requirements.

(1) If the Contractor is not enrolled as a Federal Contractor in E-Verify at time of contract award, the Contractor shall--

(i) Enroll. Enroll as a Federal Contractor in the E-Verify program within 30 calendar days of contract award;

(ii) Verify all new employees. Within 90 calendar days of enrollment in the E-Verify program, begin to use E-Verify to initiate verification of employment eligibility of all new hires of the Contractor, who are working in the United

States, whether or not assigned to the contract, within 3 business days after the date of hire (but see paragraph (b)(3) of this section); and

(iii) Verify employees assigned to the contract. For each employee assigned to the contract, initiate verification within 90 calendar days after date of enrollment or within 30 calendar days of the employee's assignment to the contract, whichever date is later (but see paragraph (b)(4) of this section).

(2) If the Contractor is enrolled as a Federal Contractor in E-Verify at time of contract award, the Contractor shall use E-Verify to initiate verification of employment eligibility of--

(i) All new employees. (A) Enrolled 90 calendar days or more. The Contractor shall initiate verification of all new hires of the Contractor, who are working in the United States, whether or not assigned to the contract, within 3 business days after the date of hire (but see paragraph (b)(3) of this section); or

(B) Enrolled less than 90 calendar days. Within 90 calendar days after enrollment as a Federal Contractor in E-

Verify, the Contractor shall initiate verification of all new hires of the Contractor, who are working in the United

States, whether or not assigned to the contract, within 3 business days after the date of hire (but see paragraph (b)(3) of this section); or

(ii) Employees assigned to the contract. For each employee assigned to the contract, the Contractor shall initiate verification within 90 calendar days after date of contract award or within 30 days after assignment to the contract, whichever date is later (but see paragraph (b)(4) of this section).

(3) If the Contractor is an institution of higher education (as defined at 20 U.S.C. 1001(a)); a State or local government or the government of a Federally recognized Indian tribe; or a surety performing under a takeover agreement entered into with a Federal agency pursuant to a performance bond, the Contractor may choose to verify only employees assigned to the contract, whether existing employees or new hires. The Contractor shall follow the applicable verification requirements at (b)(1) or (b)(2), respectively, except that any requirement for verification of new employees applies only to new employees assigned to the contract.

(4) Option to verify employment eligibility of all employees. The Contractor may elect to verify all existing employees hired after November 6, 1986 (after November 27, 2009, in the Commonwealth of the Northern Mariana

Islands), rather than just those employees assigned to the contract. The Contractor shall initiate verification for each existing employee working in the United States who was hired after November 6, 1986 (after November 27, 2009, in the Commonwealth of the Northern Mariana Islands), within 180 calendar days of--

(i) Enrollment in the E-Verify program; or

(ii) Notification to E-Verify Operations of the Contractor's decision to exercise this option, using the contact information provided in the E-Verify program Memorandum of Understanding (MOU).

(5) The Contractor shall comply, for the period of performance of this contract, with the requirements of the E-

Verify program MOU.

(i) The Department of Homeland Security (DHS) or the Social Security Administration (SSA) may terminate the

Contractor's MOU and deny access to the E-Verify system in accordance with the terms of the MOU. In such case, the Contractor will be referred to a suspension or debarment official.

(ii) During the period between termination of the MOU and a decision by the suspension or debarment official whether to suspend or debar, the Contractor is excused from its obligations under paragraph (b) of this clause. If the suspension or debarment official determines not to suspend or debar the Contractor, then the Contractor must reenroll in E-Verify.

(c) Web site. Information on registration for and use of the E-Verify program can be obtained via the Internet at the

Department of Homeland Security Web site: http://www.dhs.gov/E-Verify.

(d) Individuals previously verified. The Contractor is not required by this clause to perform additional employment verification using E-Verify for any employee--

(1) Whose employment eligibility was previously verified by the Contractor through the E-Verify program;

(2) Who has been granted and holds an active U.S. Government security clearance for access to confidential, secret, or top secret information in accordance with the National Industrial Security Program Operating Manual; or

(3) Who has undergone a completed background investigation and been issued credentials pursuant to Homeland

Security Presidential Directive (HSPD)-12, Policy for a Common Identification Standard for Federal Employees and

Contractors.

(e) Subcontracts. The Contractor shall include the requirements of this clause, including this paragraph (e)

(appropriately modified for identification of the parties), in each subcontract that--

(1) Is for--(i) Commercial or noncommercial services (except for commercial services that are part of the purchase of a COTS item (or an item that would be a COTS item, but for minor modifications), performed by the COTS provider, and are normally provided for that COTS item); or

(ii) Construction;

(2) Has a value of more than $3,000; and

(3) Includes work performed in the United States.

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by…